SCARIFIER 1300W TTB428GDO
24
month
Manufacturer's
Warranty
SAFETY AND OPERATING MANUAL
Original instructions
SCARIFIER 1300W TTB428GDO
Congratulations on your purchase of a power tool from Titan Power
Tools (UK) Ltd. We want you to continue getting the best performance from
it so this handbook includes information on safety, handling and care. Please
retain this handbook in case you need to refer to any of the information in the
future.
Your power tool comes with a 24-month guarantee, so should it develop
a fault within this period contact your retailer.
GUARANTEE
This product carries a guarantee of 24 months. If your product develops a fault
within this period, you should, in the rst instance contact the retailer where the item was
purchased.
This guarantee specically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For any enquiries relating to the guarantee please refer to your retailer.
SAFETY INSTRUCTIONS
Warnings! Read this instruction carefully before operating this pruner.
Make sure that you are familiar with the controls and properly operate the
machine. Following this instructions, you can reduce the risk of re, electric shock
and personal injury.
GENERAL SAFETY INSTRUCTIONS
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury! Save all warnings and
instructions for future reference. The term "garden power tool" in the warnings refers to
your mains-operated (corded) garden power tool or battery-operated (cordless) garden
power tool!
1. This garden power tool is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the garden power tool by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the garden power
tool.
3. The garden power tool must be kept out of reach of children.
4. Store the instruction manual in a location accessible to all users of the garden power
tool and always include the instruction manual when passing it on to other users.
5. Instruct inexperienced persons on the safe use of this garden power tool using this
instruction manual.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Training
Read the instructions carefully. Be familiar with the controls and the proper use of the
machine.
Preparation
1. Never allow people unfamiliar with these instructions or children to use the
product. Local regulations can restrict the age of the operator.
2. Never operate the product while people, especially children, or pets are nearby.
3. Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
4. Wear ear protection and safety glasses at all times while operating the product.
5. Always wear substantial footwear and long trousers while operating the
product. Do not operate the product when barefoot or wearing open sandals.
6. Thoroughly inspect the area where the product is to be used and remove all
stones, sticks, wires, bones and other foreign objects.
7. Before using, always visually inspect to see that the tines, bolts are not
worn or damaged. Replace worn or damaged tines and bolts in sets to preserve
balance.
SCARIFIER 1300W TTB428GDO
Operation
1. Operate the product only in daylight or in good articial light.
2. Avoid operating the product in wet grass or take additional precautions to avoid
slipping.
3. Always be sure of your footing on slopes.
4. Walk, never run.
5. Always work across the face of slopes, never up and down.
6. Exercise extreme caution when changing direction on slopes.
7. Do not operate the product on steep slopes.
8. Use extreme caution when reversing or pulling the product towards you.
9. Stop the tines if the product has to be tilted for transportation. Do not operate
the tines when crossing surfaces other than grass, and when transporting the product
to and from the working area.
10. Never operate the product with defective guards, or without safety devices, for
example deectors and/or grass catchers, in place.
11. Switch on the motor carefully according to instructions and with feet well away from
the tine(s).
12. Do not tilt the product when switching on the motor, except if the product
has to be tilted for starting. In this case, do not tilt it more than absolutely
necessary and lift only the part which is away from the operator.
13. Do not start the motor when standing in front of the discharge opening.
14. Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
15. Never pick up or carry a product while the motor is running.
16. Stop the motor and disconnect the product from the power supply:
-- before clearing blockages or unclogging the discharge opening;
-- before checking, cleaning or working on the product;
-- after striking a foreign object. Inspect the product for damage and make repairs before
restarting and operating the product;
-- if the product starts to vibrate abnormally (check immediately).
-- whenever you leave the product.
17. Never use the scarier without the grass catcher bag securely tted.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure the product is in a safe working
condition.
2. Allow the product to cool before storing in any enclosure.
3. Check the grass catcher frequently for wear or deterioration.
4. Examine the product regularly and replace worn or damaged parts for safety.
Additional safety warnings
1. Warning! Beware of sharp tines. Tines continue to rotate after the motor is switched
off.
2. Do not use the product if the cords are damaged or worn.
3. Do not to connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply. A damaged cord can lead to contact
with live parts.
4. Keep extension cords away from the tines. The tines can cause damage to the
cords and lead to contact with live parts.
5. If operating a garden power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the risk
of electric shock.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use lowvibration and low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct application tools for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a number of
days.
Emergency
Familiarise yourself with the use of this product by means of this instruction manual.
Memorise the safety directions and follow them to the letter. This will help to prevent risks
and hazards.
1. Always be alert when using this product, so that you can recognise and
handle risks early. Fast intervention can prevent serious injury and damage to
property.
2. Switch off and disconnect from the power supply if there is any malfunction.
Have the product checked by a qualied specialist and repaired, if necessary, before
you put it into operation again.
WARNING! This product produces an electromagnetic eld during operation!
This eld may under some circumstances interfere with active or passive
medical implants! To reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this product!
Residual risks
Even if you are operating this product in accordance with all the safety requirements,
potential risks of injury and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration emission if the product is being used over long
periods of time or not adequately managed and properly maintained.
2. Injuries and damage to property due to broken application tools or the sudden impact
of hidden objects during use.
3. Danger of injury and property damage caused by ying objects.
SCARIFIER 1300W TTB428GDO
VIBRATION
SYMBOLS
The European Physical Agents (Vibration) Directive has been brought in to help reduce
hand arm vibration syndrome injuries to power tool users. The directive requires power tool
manufacturers and suppliers to provide indicative vibration test results to enable users to make
informed decisions as to the period of time a power tool can be used safely on a daily basis and
the choice of tool. Further Advice can be found at www.hse.gov.uk
The declared vibration emission value should be used as a minimum level and should be used
with the current guidance on vibration.
Calculating the actual period of the actual period off use can be difcult and the HSE website
has further information.
The declared vibration emission been measured in accordance with a standard listed test stated
above and may be used to compare one tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
Warning
Read the instruction manual
Double insulation
Compliance with relevant safety standards
Wear eye protection
Wear ear protection
Wear breath protection
Gloves with saw protection
Boots with saw protection, steel toecap and non-slip sole
To avoid potential electric shock, do not use the unit in humid or wet conditions
Switch off! Remove plug from mains before cleaning or maintenance
Switch off! Remove plug from the mains immediately if the cable is damaged or cut.
Work across the face of slopes, never up and down.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
Avoid using tools in temperatures of 10°C or less.
Plan your work schedule to spread any high vibration tool use across a number of days. Health
Surveillance.
Health Surveillance.
All employees should be part of an employer’s health surveillance scheme to help identity any
vibration related diseases at an early stage, prevent disease progression and help employees
stay in work.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING! The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being ground or cut.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
WARNING! identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time). Note The use of other tools will reduce the users’ total working
period on this tool.
Vibration total values (triax vector sum) determined according to EN60335-2-92 and EN13683
Vibration level for operation Vibration emission value ah = 3.591m/s²
Uncertainty K = 1.5 m/s²
Double insulation:
The tool is double insulated. This means that all the external metal parts are electrically insulated
from the mains power supply. This is done by placing insulation barriers between the electrical
and mechanical components making it unnecessary for the tool to be earthed.
Important note:
Be sure the supply is the same as the voltage given on the rating plate. The tool is tted with a
two-core cable and plug. Remove the mains plug from socket before carrying out any adjustment
or servicing.
SCARIFIER 1300W TTB428GDO
3
4a
4b
4
5
6
24
22
23
8
9
7
19
1
10
21252
18
17
16
15
14
12
13
11
20
1. Handle
2. Cord s train relie f
3. Upper handle bar
4. Mounting set (x4) for ha ndle bar
4a. Kno b
4b. Bolt
5. Middle handle ba r
6. Lower h andle bar
7. Screw (x 2)
8. Support
Inspect the area where the product is to be used and remove all objects which
could be thrown by the product. If objects are hidden while operating stop the
motor and remove them.
Beware of sharp tines. Tines continue to rotate after the motor is switched
Off. Remove plug from power supply before maintenance or if the power cord
is damaged.
Keep supply cord away from the cutting device.
Cutting device continues to rotate after the product is switched off. Wait until
all components have completely stopped before touching the product.
Waste electrical products should not be disposed of with household waste, please
recycle where facilities exist. Check with your local authority or retailer for recycling
advice.
Guaranteed sound power level
Objects thrown by the product could hit the user or other bystanders.
Always ensure that other people and pets remain at a safe distance from the
product when it is in operation. In general, children must not come near the
area where the product is.
Loading...