Titan TTB059VAC Safety And Operating Manual

15L WET/DRY VACUUM TTB059VAC
SAFETY AND OPERATING MANUAL
TVC100P-M-070924.indd 1 2007-9-24 19:30:02
TVC100P-M-070924.indd 2 2007-9-24 19:30:02
15L WET/DRY VACUUM TTB059VAC
This product carries a guarantee of 12 months. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
This guarantee specifically excludes losses caused due to:
- Fair wear and tear
- Misuse or abuse
- Lack of routine maintenance
- Failure of consumable items (such as batteries)
- Accidental damage
- Cosmetic damage
- Failure to follow manufacturer’s guidelines
- Loss of use of the goods
This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.
For further technical advice, spare parts or repair service (outside of guarantee) please contact the customer helpline number on
0845 607 6380.
Congratulations on your purchase of a power tool from Titan Power Tools (UK) Ltd. We want you to continue getting the best performance from it so this handbook includes information on safety, handling and care. Please retain this handbook in case you need to refer to any of the information in the future.
Your
power tool comes with a 12-month guarantee,so should it develop
a fault within this period contact your retailer.
TVC100P-M-070924.indd 3 2007-9-24 19:30:02
SAFETY INSTRUCTIONS
Warning: Read all instructions. Failure to follow all instructions listed below may result in serious injury. This product should never be left
unattended when connected to the mains supply.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
ELECTRICAL SAFETY
Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230V AC 50Hz. Connecting it to any other power source may cause damage.
Important notes
Attention: Before assembly and starting operation, read the operating instructions carefully.
Check that the mains voltage corresponds to the details on the type plate.
Pull the mains plug out of the socket when: the unit is not in use, before opening the unit, before cleaning and maintenance.
Never clean with solvents.
Do not use the cable to pull the plug out of the socket. When unit is ready for use, do not leave unattended.
Safeguard from children.
Care must be taken that the mains connection lead is not damaged by being driven over, crushed, stretched, etc.
The unit must not be operated if the mains connection lead is not in perfect condition.
Replacement mains connection leads must not differ from the versions indicated by the manufacturer.
On no account vacuum: burning matches, glowing ashes and cigarette ends, inflammable, corrosive, fire hazard or explosive substances, vapours and liquids.
• This unit is not suitable for vacuuming dust which is damaging to health.
Store the unit in a dry place.
Do not operate a defective unit.
Servicing only by an authorised service point.
Use only for operations for which the unit is intended.
• Take great care when cleaning stairs.
Use only manufacturer’s attachments and spare parts.
TVC100P-M-070924.indd 4 2007-9-24 19:30:02
15L WET/DRY VACUUM TTB059VAC
HEALTH ADVICE
Warning! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with, this dust can be particularly harmful to you (e.g. lead from old gloss paint). You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles.
SYMBOLS
Read the manual Warning Wear gloves
Wear dust mask,eye & ear protection
Conforms to relevant safety standards
TVC100P-M-070924.indd 5 2007-9-24 19:30:02
Loading...
+ 11 hidden pages