Titan 77087 Users Manual

SF Rush

User Manual

Table of Contents

Getting Started 2
Setting up your SF Rush 3
Downloading the App 4

Product Features 5

Product Specs 6

Precautions 7

Getting Started

Congratulations on getting an SF Rush!

Your SF Rush box includes the following:

– SF Rush

– Warranty Booklet

Setting Up Your SF Rush

• Once you have taken your SF Rush out of the box,

long press on the touch area on the screen to wake

up your SF Rush from deep sleep mode.

• Once your SF Rush is awake, tap on the touch area to
scroll through the various screens. The screens are

time, steps, calories, distance, percentage complete,

Downloading the App

• The ‘SF Rush’ app is available on both Android & iOS,

and is compatible with Android 5.0 & above and iOS

11 & above.

• Download the ‘SF Rush’ app on your device.

• Once the app is downloaded, open it and follow the

on-screen instructions to complete the pairing of
your SF Rush with your phone. Please ensure that all

permissions asked for are approved so that the app

can function properly.

Product Features

• Time, day & date

• Steps walked

• Calories burnt

• Distance covered

• Active time

• Vibration alarm

• Sedentary reminder

• Automatic sleep tracker

Product Specs

Bluetooth version 4.2

Screen resolution 128*32 pixels

Screen size 0.91 inch
Battery type Lithium-ion rechargeable

Battery capacity / voltage 50mAh / 3.7V

Strap material PU
Tracker head material ABS
Buckle Zinc Alloy
Water resistance IPx6
Standby time 7 days
Motion sensor 3D

Precautions

• Avoid fire or contamination

• SF Rush is not suitable for swimming and is only Water

Resistant upto IPX6.

• Do not disassemble the tracker head as it may lead to fire or

defects.

• Do not use the product under very high or very low
temperature.

• Do not keep or use the product at places where moisture or

inflammables are present.

• In case the product gets contaminated by cosmetics, please

clean it with a damp cloth immediately.

Wrning

changes or modificaons not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operaon

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause
harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a
parcular installaon.
If this equipment does cause harmful interference to radio
or television recepon, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separaon between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.