USER'S MANUAL
www.tissot.ch
2/19 119_E / 06-04
CONTENTS
CHAPTER
Introduction 3
Important notes 4
Safety notes 4
General user information 5
Starting procedure 6
Registration 6
Storage battery 7
Navigation structure 9
"Watch" functions 10
Selecting the "Face" (watch face) display mode 11
Downloading watch faces 11
Time setting (Set time) 11
"Chrono" mode (chronograph) 12
"Alarm" mode 13
"Timer" mode 14
"Settings" mode 14
Frequently Asked Questions 16
Using MSN® Direct services 18
Certifications 18
Care and maintenance 19
Warranty 19
PAGE
www.tissot.ch
3/19 119_E / 06-04
We would like to thank you for choosing a watch from
TISSOT®, one of the most highly renowned Swiss
brands in the world.
Your High-T® watch forms part of the TISSOT® touch
screen range and benefits from the most recent
technical innovations, including the famous touch
screen technology. It also offers you a fully digital
("matrix") display that allows you to choose the type
of time display (analogue, digital or more innovative
watch faces) and the customary functions of a watch
(date, chronograph, timer, alarms, etc.), and to access
other information services by simply touching the
glass: weather, news, stock prices, sports results, etc.
The radio signal used to transport this data also allows
the time to be set automatically, whatever the time
zone in which you are located, provided that you are
in an area with radio coverage.
With your High-T® watch, you can also receive
personal messages. To start using your High-T®,
follow the starting procedure described on page 6 of
this document, activate the MSN® Direct services on
www.msndirect.com and discover your watch and its
functionalities with the help of this User's Manual!
A mere touch of the finger on one of the
four peripheral zones or on the center
of the sapphire crystal allows you to
navigate in the various menus.
Introduction
P1
P2
P3
YOUR WATCH IN A NUTSHELL
PUSH BUTTONS
P1
Chronograph or countdown timer start •
Alarm activation • Incrementing the selected
value (+).
P2
Touch screen activation by a long press
for less than 2 seconds • Display lighting
activation by a long press for more than
2 seconds • Validation by a short press
(Enter).
P3
Chronograph split or reset • Countdown
timer and alarm setting • Decrementing the
selected value (-).
TACTILE FUNCTIONS
Previous page • Incrementing the selected
value (+).
Shortcut screen (long touch).
Next page • Decrementing the selected
value (-).
Access to information services.
Enter • Chrono split recall.
www.tissot.ch
4/19 119_E / 06-04
Important notes
Your watch was charged on leaving the factory so
that you may use it as soon as you remove it from its
packing; it is delivered in "OFF" mode (see page 8) to
preserve an adequate charge level. To activate your
High-T®, press and then release the three push buttons
simultaneously (see also the starting procedure on
page 6).
The information is transmitted by FM radio. The
quality of reception may therefore vary depending on
the place in which you are located (see notes on FM
reception on page 16).
Your High-T® is water-resistant at up to 3 ATM.
However, no function can be activated if the crystal is
in contact with a liquid; moreover, since FM reception
does not work under water, your High-T® will not be
able to receive information.
The bracelet of your High-T® contains a metallic
antenna required to receive information. Avoid twisting
or deforming the bracelet, so as not to damage the
antenna and thereby prevent satisfactory reception of
information.
Safety notes
Never handle your watch when walking, driving a
car, a motorcycle or any other motor vehicle, riding
a bike, etc. You could be distracted in this way, not
notice danger and create accidents.
Mains adapter (charger system):
Use exclusively the mains adapter, cable and
plug supplied with your High-T® watch to
recharge it. The use of any other equipment
could cause abnormal overheating of the
storage battery and cause bodily injuries.
Never use a defective plug or charger! Only by
using an original charger and plug in perfect
condition can you be sure of charging your
High-T®.
Handle the charger mains adapter and plug
carefully and avoid exposing it to impacts, to a
direct or indirect source of heat, to moisture or
to any other foreign body.
Never cover the mains adapter with a cover or
any other object.
Never touch the mains adapter with wet
hands.
Never dismantle the mains adapter or the
watch plug.
Do not try to dispose of the adapter by
incineration.
During storms, it is recommended disconnecting
the mains adapter.
Avoid any extended contact with the mains
adapter when it is energised with your watch
undergoing charging.
Keep the mains adapter out of reach of young
children.
Do not place the power cord near a radiator or
other source of intense heat.
If the adapter is not used for a prolonged period
of time, make sure to disconnect it from the
wall socket.
"Tissot SA declines all liability concerning the
content of the information received by the watch.
Tissot SA declines all liability concerning the quality,
service and coverage of the network accessible to
the watch".
For any question relating to the points mentioned
above, please consult the www.msndirect.com
website or call MSN® Direct Customer Service at
1-866-658-7032.
New message: indicates a message that has been received and not read.
Charging the watch: indicates that the storage battery is currently being charged.
Charge low: appears when the storage battery charge level is below 30%. This means the
watch will soon have to be recharged.
Chrono operating: indicates that the chronograph is currently in operation.
Timer operating: indicates that countdown timing is currently in progress.
Quality of reception: indicates that the radio signal is at maximum power.
Quality of reception: indicates that the watch detects no signal or that it has been outside
of a coverage area for more than 10 minutes.
Quality of reception: indicates that the watch cannot receive your personal information.
This may occur if the signal has not yet confirmed the home coverage area of your HighT, or if you travel outside of your home coverage area without having set the roaming
parameter.
Quality of reception: indicates that the watch's radio receiver is deactivated and that the
watch cannot receive signals.
www.tissot.ch
5/19 119_E / 06-04
General user information
Before using the touch screen, it is essential to
activate it by pressing P2 (long press of less than
2 seconds). Activation is confirmed by a beep and/or a
vibration.
A press of more than two seconds on P2 activates
the screen lighting.
The central zone of the screen corresponds to
the Enter key.
A long touch on the zone opens a shortcut
screen which enables you to access the channels of
your choice directly.
Incorrect operation of push buttons P1, P2 or P3 is
indicated by low-frequency beeps.
If no operation is performed during 20 seconds, the
touch screen is deactivated automatically.
If no operation is performed during 4 seconds
when a title screen is displayed, e.g. "Messages", the
mode indicated is selected automatically (identical to
confirmation by ).
When is touched in a setting mode, the new
setting is stored in memory and the watch returns to
the higher level.
When (Enter) is touched in a setting mode,
the new setting is stored in memory, but the watch
remains in the setting mode.
SYMBOLS USED
ICON MEANING
www.tissot.ch
6/19 119_E / 06-04
Starting procedure
Your High-T® is delivered in "OFF" mode and has
been charged on leaving the factory. It may, however,
be necessary to partially recharge it (see charging
procedure on page 8).
Remove your watch and its charger from the
packing.
Simultaneously press the three push buttons P1,
P2 and P3.
This operation causes your watch to restart
("Reset").
The TISSOT® welcome page appears after a few
seconds and is then replaced by a conventional
display of the time.
Depending on the storage battery charge level,
it may be necessary to first recharge your
High-T® before you can start it. In that case, the
screen displays no information.
Registration
To activate and personalize the MSN® Direct information
services, you must first register your watch: log on
to the www.msndirect.com website, then follow the
instructions displayed on screen.
To obtain the ID number of your High-T®, proceed as follows:
Activate the touch screen by a long press
(less than 2 seconds) on P2. Touch the tactile
zone several times until the "Register"
screen is displayed.
Wait a moment or touch the central
zone
until your watch displays your ID
number.
Using a computer, log on to Internet and go to
the www.msndirect.com website. Click on "Begin
Activation", then follow the instructions displayed on
screen.
When the "Done" page appears, click on the
"Personalize Service Now" button and then
follow the instructions displayed on screen.
Congratulations! Your MSN® Direct services are
now activated. You will receive within 12 hours your
personalized content, a welcome message and a
confirmation e-mail within 24 hours.
You can return as often as you want to the "Channels"
tab on the MSN® Direct website to change your
selected options or activate new services.
Touch screen
activation
P2
www.tissot.ch
7/19 119_E / 06-04
Storage battery
Your High-T® is fitted with a Lithium-Ion type storage
battery. It left the factory fully charged.
If no information is displayed following the starting
procedure described on page 6, connect your High-T®
to the socket on the charger provided and wait until
the display is activated automatically.
Note: If you want to know the charge level of your
High-T®, look up the "Watch Info" page in "Settings"
mode (see pages 10 and 15).
POWER RESERVE
CHARGE LEVEL PERFORMANCE OF YOUR High-T
®
Depending on how it is used, your High-T® provides you with a power reserve of four
or five days. After that, an alert screen will notify you that it is time to recharge the
watch. The table below describes the performance of your watch according to its charge
level.
Replacing the storage battery:
Only an authorized TISSOT® Service Center can replace the storage battery on your
High-T®. Never try to replace it yourself.
For environmental protection reasons, the storage battery must be disposed of in a
controlled manner by an authorized TISSOT® Service Center.
Over 30%
Your High-T® operates normally.
30%
The low charge indicator appears.
20%
A warning message is displayed and your watch goes to "low consumption"
mode. The radio is turned off and no longer receives any information. After
five minutes, the watch goes automatically to the "Time" channel display using
the watch face that offers the lowest energy consumption. Some watch faces
are no longer available.
10%
Your watch is switched off and there is no longer any display; however, the
memory's content is preserved.
www.tissot.ch
8/19 119_E / 06-04
PRECAUTIONS FOR CHARGING
Make sure to insert the plug carefully in your High-T®!
CHARGING VIA WALL SOCKET
CHARGING VIA PC CABLE
POINTS TO BE CONSIDERED
To recharge your watch, simply connect the mains
adapter to a wall socket and insert the plug in the
slot situated on the underside of your watch.
The display indicates that charging is in progress
and, when the storage battery has been suitably
recharged, charging stops automatically. The time
required for complete recharging is approximately
two and a half hours. During recharging, your watch
receives and displays the information.
You can use the PC cable to recharge your watch via
the USB port of your computer. However, this cable
has no USB functionality and does not permit data
interchange with your PC.
Prefer a single USB connection (avoid using a
USB hub).
Charging via the USB port may not work,
in particular if:
The USB port is not activated (BIOS settings,
Windows version);
The PC is in energy saving mode or is not
turned on;
The current delivered is not sufficient
(especially for use with a USB hub).
Place your High-T® on a flat surface, with the
display downward, then bring the plug horizontally
opposite the opening in the back of the watch and
insert it in the charging slot.
If you do not use your High-T® for a long period
of time, we nevertheless advise you to recharge
it regularly so as to avoid damaging the storage
battery.
It is strongly recommended not to perform
recharging of your watch at temperatures below
10°C or above 40°C.
Please also become acquainted with the safety
notes on page 3.
www.tissot.ch
9/19 119_E / 06-04
Note: the channels shown above are examples;
the channels actually available on your watch
depend on the services that you have activated on
www.msndirect.com.
You must have installed and activated the MSN® Direct
services for the selected channels to be displayed by
your watch. Only the "Time" channel and its various
modes are available without registering.
A long touch on displays the shortcuts to the
channels most frequently used, including the "Time"
channel.
Navigation structure
Through your High-T®, you have access to a large
quantity of information. This information is organized
in "Channels", similar to television channels, so as to
make it as easy as possible to access and use.
Each channel is divided into "modes" that can be
compared to various programmes broadcast over
a given TV channel. For example, you will find the
"Local", "My Cities" and "International Weather" modes
in the "Weather" channel; the "Chrono" and "Timer"
functions are two modes of the "Time" channel.
Previous page
Next page
Access to information
channels
Confirmation
(automatic entry after
4 seconds)
CHANNELS
MODES CONTENT
To navigate in the various canals, activate the touch screen (P2), then refer to the following diagram.
www.tissot.ch
10/19 119_E / 06-04
This section describes the operation of the "Time"
channel with the various Watch modes of your High-T®.
The operation of navigation in the other channels
are similar. Please refer to the www.msndirect.com
website for further information on the other channels.
"Watch" functions
With the "Time" channel, your High-T® has all the
customary functions of a digital watch, although with
a few improvements:
Time (two time zones), in different forms of
display.
Chronograph (with one or more time splits).
Two alarms (the first exclusively over 24 hours,
and the second daily, weekly or occurring at a given
date), each having its own tone.
Timer.
To navigate in the "Time" channel, activate the touch screen (P2), then refer to the following diagram.
TIME MODES FUNCTIONS
Activate the touch screen by pressing
for less than 2 seconds on P2.
… then touch to see the new watch
face…
… then to keep it or to reject
it.
Touch screen
activation
P2
www.tissot.ch
11/19 119_E / 06-04
Selecting a watch face
Activate the touch screen by pressing
for less than 2 seconds on P2.
Thanks to its matrix screen, your High-T® can
display the time in various ways: in the manner of a
conventional analogue watch or a digital watch with
various graphics, as illustrated opposite.
From the time display, touch and
to choose your preferred watch
face.
+
P1
–
P3
You can also use push buttons P1 and
P3 to scroll the various watch faces.
Selecting the "Face" (watch face) display mode
Receiving a new watch face
Thanks to the MSN® Direct services, you can receive
new watch faces. When a new watch face is received,
your High-T® displays the messages indicated in the
following screens.
Please note: To receive new watch faces, you must
add the "Watch faces" channel to the active service on
your watch.
You can store only one downloaded face at a time;
when you upload a new watch face, the previous one
is erased. On the other hand, all the original faces are
preserved.
The radio signal used to convey information also
enables your watch to be synchronized with a
reference clock. Your High-T® thus constantly shows
the precise time, wherever you are (provided that you
are in an area covered by the radio signal). However, it
is possible to set the time by hand, in accordance with
the procedure described in the "Settings" section, on
page 15.
Downloading watch faces
Time setting (Set time)
Touch screen
activation
P2
Press P1 to start the chronograph...
…then on P1 once again to stop it...
…then on P1 to continue or on P3 to
reset it.
Start
P1
Stop
P1
Press P1 to start the chronograph...
Start
P1
…then on P3 to display a time split (the
display restarts after 7 seconds) ...
Then, press P2 to review the time splits.
Split
P3
Review
P2
Continue
P1
Reset
P3
…then on P1 to stop.
Stop
P1
Stop
P1
www.tissot.ch
12/19 119_E / 06-04
Precise measurement of a period of time
To access the "Chrono" mode, refer to the navigation
diagram in the "Time" channel described on page 10.
While the chronograph is operating, you can change
menu (by a touch on ) to set an alarm or to look up
service, for example the weather, then return to the
"Chrono" mode.
On watch faces showing the time, the icon
indicates that the chronograph is activated. This icon
also appears in the other channels, when the Time and
Date bar appears at the top of the screen.
In order to extend the battery life of your High-T®,
the hundredths of a second are displayed for only the
first 10 seconds of any operation. However, the time
measurement is always accurate to within 1/100th of
a second and the accurate time is displayed when you
stop the chronograph or when you display a time split.
After stopping the chrono, touch or press P2
to display the various time splits that you have
recorded.
Continue
P1
Reset
P3
"Chrono" mode (chronograph)
Precise measurement of a period of time with time split(s)
Press P1 to activate or deactivate alarm
1, then, if necessary, on P2 to switch to
alarm 2 …
… then again on P1 to activate or
deactivate alarm 2.
Turn On/Off
P1
Switch to 2
P2
Turn On/Off
P1
Switch to 1
P2
First select alarm 1 and then press P3 to
enter the setting mode for the selected
alarm …
… then P1 or P3 to set the hour. Confirm
with P2, then set the minutes with P1 and
P3, and confirm with P2 …
… then choose the type of alert (sound,
vibrator or both) by means of P1 and P3,
then confirm with P2.
Set
P3
+
P1
–
P3
Confirm
P2
+
P1
–
P3
Confirm
P2
Confirm
P2
First select alarm 2, then press P3 to
select the daily alarm ("Every day"),
then confirm with P2. Then perform
settings for alarm 1 as described in
step 2 above.
Press P3 to select the specific alarm
("Custom"), then confirm with P2. Use P1
and P3 to change the value for the year
and then confirm with P2; set the desired
month and day in the same way. Confirm
with P2 and then proceed as described in
step 2 above.
Press P3 to select the weekly alarm
("Every xxx day")
(a given day xxx each
week), then confirm with P2. Choose the
day of the week for triggering of alarm
2 with P1 and P3, then confirm with P2.
Then perform the following settings for
alarm 1 as described in step 2 above.
+
P1
–
P3
Confirm
P2
+
P1
–
P3
Confirm
P2
Set
P3
You cannot switch from alarm 1 to alarm 2 and
vice versa when the watch is in setting mode.
Following confirmation of the various alarm
settings, the alarm is automatically activated (ON).
www.tissot.ch
13/19 119_E / 06-04
Step 1: Selecting and activating or deactivating the alarm
Your High-T® has two separate alarms, each having its
own settings and its own melody.
To access the "Alarm" mode, refer to
the navigation diagram in the "Time" channel described
on page 10.
When an alarm is triggered, press any push button
to stop it.
"Alarm" mode
Step 2: Setting alarm 1
Step 3: Setting alarm 2
To set alarm 2, you must first choose the frequency
of the alarm: every day, on a specific date or once a
week.
Every day
...
...
on a specific date
...
...
or once a week.
Press P1 to start the timer…
…then P1 once again to stop it...
Then press P1 to continue or P3 to reset
the timer to its initial value.
Start
P1
Set
P3
Stop
P1
Continue
P1
Reset
P3
Select the "Settings" mode of the
"Time" channel.
Select the line corresponding to the
desired setting.
Touch
to enter into
setting mode.
Use and to select the desired
value. Confirm with
.
www.tissot.ch
14/19 119_E / 06-04
Your High-T® has a "Timer" function adjustable from 1
second to 23 hours, 59 minutes and 59 seconds.
To access the "Timer" mode, refer to the navigation
diagram in the "Time" channel described on page 10.
"Timer" mode
To activate or deactivate the "Timer":
While the timer is operating, you can without any
problem change mode (by a touch on ), for example
to set an alarm, or channel (by a second touch on ),
for example to look up stock prices, then return to the
chrono mode, etc.
On most watch faces showing the time, the icon
indicates that the timer is activated. This icon also
appears in the other channels, when the Time and
Date bar appears at the top of the screen.
When the end of timing signal is triggered, press
any push button to stop it.
"Settings" mode
You can perform a number of settings on your
High-T®. To do so, simply choose the "Settings" mode
in the "Time" channel and refer to the navigation
diagram in the "Time" channel described on page 10.
Choose the desired setting using and ,
then confirm by touching
. The selected setting is
indicated by a black bar (see below).
Next modify the selected value using and ,
then confirm using
.
Press P3 to enter timer setting mode... ...then P1 and P3 to set the timing
period (in minutes), then press P2 to
confirm, set the period in seconds and
then in hours...
...then finally confirm
by pressing P2.
Set
P3
To set the "Timer" mode:
+
P1
–
P3
Confirm
P2
Confirm
P2
www.tissot.ch
15/19 119_E / 06-04
"SETTINGS"
DESCRIPTION
"Sound"
Three options allow you to set the sounds emitted by your watch:
"All On" – All possible sounds are used.
"All Off" – No sound is emitted.
"Alerts Only" – Only the alarms (or countdown timing) and alerts
generated by the network are emitted.
"Vibration"
To activate or deactivate the vibrator of your High-T®.
"Set Time"
To set the time by hand. In normal use, i.e. in an area covered by the radio
network, your High-T® requires no setting to display the correct time, irrespective
of the time zone in which you are located.
"Time Zone"
To select the two time zones manually (touch to go directly to the second
time zone).
Radio
To activate/deactivate reception of information.
Transition
To select the type of transition between two different screens.
"Time Format"
To define the time display format.
"Date Format"
To define the date display format.
"Units"
To select the system of units used.
"Time Offset"
To offset the displayed time by a few minutes (up to 15) relative to the actual
time.
"Splash Delay" To set the time lag before automatic entry into a channel ("Time", "Glance",
"News", etc.).
"Watch Info"
This mode displays a variety of information, in particular the power of the radio
signal, the storage battery charge level and the name of the radio station to
which your High-T® is connected.
"Watch Off"
To increase your watch's battery life, for example during a period of non-use,
you can place it in "sleep" mode ("Watch Off"). In this mode, the time and
memory content are preserved, but no information is displayed and no alarm
or alert is generated.
To "wake" your watch, press any push button.
"Software"
Indicates the software version installed in your watch.
ITEM
www.tissot.ch
16/19 119_E / 06-04
Frequently Asked Questions
Here are the questions most commonly asked
concerning your High-T®. If you have questions
concerning the MSN® Direct service, log on to MSN®
Direct at www.msndirect.com and click on the Help
link.
How do I replace or recharge my watch
battery?
It is not necessary to replace the storage battery;
it is rechargeable.
To recharge it, follow the instructions given on
page 8.
How do I know if my watch is receiving a signal?
Check the signal power icon which can be
found on most of the watch displays (watch
faces).
indicates a good signal, which means that
your watch has good reception and that it is
receiving information.
means "no signal", which means that you
are outside an MSN® Direct coverage area or
that reception in the region in which you are
located temporarily is weak.
means that the watch is possibly not
receiving your personal information. This
can happen before the signal confirms the
coverage area for your watch, or if you leave
your coverage area.
means that the watch's radio is switched off
and that the watch can therefore not receive
radio signals.
Check the signal power percentage in the
"Watch info" menu.
How do I determine the battery's residual life?
You can verify the storage battery's charge
status as a % on the "Watch info" menu of the
"Settings" mode.
How do I extend the battery's life?
Choose a simple watch face, with few
animations.
Use only the "Time" channel.
Make sure that the "Audio" setting is on "ALL
OFF".
Make sure that the "Vibration" setting is on
"OFF".
Stop radio reception by placing the "Radio"
setting on "OFF".
Place your watch in "sleep" mode (see page
15).
How do I set the time on my watch?
So long as you are in an area covered by
MSN®Direct, you should not have to set the time
by hand. Your watch is radio-synchronized with
a reference clock. The initial synchronization
may take a few minutes. The phrase "Time set
by network" on the "Set time" menu of the
"Settings" mode indicates that you are in an
MSN® Direct reception area.
If you are outside an MSN® Direct reception
area, you can define the time and date on your
watch by hand (see page 14).
What happens when I activate the MSN® Direct
service?
Your watch receives the information that you
have selected on the MSN® Direct website. The
following events occur:
1. Your watch receives a "Welcome"
confirmation message.
2. The registration channel disappears from
your watch.
3. Your watch starts to receive the content of
the selected channels.
When you choose new services, they are first set
up in your watch, and then the new content is
displayed.
How do I know when my watch is activated?
You will receive a "Welcome" confirmation
message on your watch. You will also receive a
confirmation e-mail within 24 hours.
www.tissot.ch
17/19 119_E / 06-04
Frequently Asked Questions (cont'd)
Can I set the audio volume on my watch?
No. However, you have a choice between three
audio operating options (see on page 15).
Can my watch communicate with other watches
that have subscribed to the MSN® Direct service?
No. However, you can send messages to other
watches that have subscribed to the MSN
®
Direct services via MSN Messenger.
Is my watch water-resistant?
Yes! Your watch is water-resistant to 3 ATM.
However, neither the touch screen nor the
information reception functions work under
water. In addition, we would ask you to note
the maintenance recommendations provided
on page 19.
Where should I send my watch to have it
repaired?
If your watch were to break down, please
contact the TISSOT® CUSTOMER SERVICE
ORGANIZATION. FOR FURTHER INFORMATION,
VISIT OUR WEBSITE AT www.tissot.ch.
My watch does not display the correct time.
What should I do?
When you start your watch for the first time,
the time shown is 12:00 A.M. When the watch
receives a signal, it automatically places itself
on the correct local time (generally in a few
minutes).
The MSN® Direct reception covers most
metropolitan areas in the United States and
Canada. If your watch is located in one of
these areas, it will receive the correct local
time automatically (unless the watch's
"Radio" setting is on "OFF"). If your watch is
located outside a broadcasting area, the time
will have to be set by hand. For any further
information concerning coverage areas, go to
www.msndirect.com and click on the Help link.
It may occur that the topography (hills, valleys),
the structure of the building in which you are
located, or other electronic devices, disturb the
broadcasting signal that your watch uses to
receive information. When this occurs, a few
minutes are needed for your watch to receive
the correct time.
Make sure that the "Time zone" menu of
the "Settings" mode displays "Autoset" for
"Zone 1".
If your watch is ahead of time by 5, 10 or 15
minutes, it is likely that a "Time offset" has
been configured (see page 15).
If you are outside a coverage area, you can set
the time on your watch by hand (see page 14).
My watch's storage battery is spent before I
start recharging it. What should I do?
Don't worry! Simply connect your watch to the
charger. All the information will be accessible
again as soon as the watch has regained an
adequate charge level and has restarted.
My watch responds to no push button. What
should I do?
Start your watch again by pressing
simultaneously the three push buttons P1,
P2 and P3. After a few seconds, the TISSOT®
welcome page appears and is then replaced by
a watch face showing the time.
If your watch still does not respond, contact the
TISSOT® customer service organization.
I have activated the MSN® Direct service but
my watch receives none of the information
that I have selected. What should I do?
It is possible that you did not receive the
activation and configuration message that was
sent to you when you activated the service. This
can occur if you are outside the MSN® Direct
broadcasting area or if you are temporarily
in an area in which reception is poor. You
can ask the MSN® Direct service to send back
a configuration message by logging on to
www.msndirect.com. Click on "Sign In", identify
yourself with the help of your .Net passport and
then go to the "Channels" page. Click on the
"Watch not receiving content?" link in order to
retrieve the information.
My watch has received no new information for
one day or more. What should I do?
The MSN® Direct reception covers most
metropolitan areas in the United States and
Canada. If your watch is located in one of these
broadcasting areas, it should automatically
receive the information broadcasted (news,
www.tissot.ch
18/19 119_E / 06-04
Frequently Asked Questions (cont'd)
weather reports, etc.). If your watch is
located outside a broadcasting area, it
receives no new information until you return
into this area. For any further information
concerning coverage areas, go to the
www.msndirect.com website and click on the
Help link.
If you leave your local coverage area and
if you are traveling in another MSN® Direct
broadcasting area, your watch can continue to
receive your personal information (personal
messages, appointments, etc.). For this purpose,
you must set the roaming parameters to
www.msndirect.com: go to the "My Location"
page, then click on "Add a travel destination".
It may occur that the topography (hills, valleys),
the structure of the building in which you are
located, or other electronic devices, disturb the
broadcasting signal that your watch uses to
receive information.
Using MSN® Direct services
You should register with MSN® Direct services to
benefit from all the functionalities of your High-T®.
MSN® Direct coverage is available for the inhabitants
of the 50 states of the United States, the district of
Columbia and Canada.
To receive MSN® Direct on your High-T®, you must
be located in an MSN® Direct coverage area; consult
the maps available on www.msndirect.com.
Internet access is required for online activation of
your MSN® Direct user account. A valid credit card is
also needed. Activation and subscription expenses
will be billed.
Certifications
Your High-T® watch has CE and FCC certification. The
CE mark on the back of your watch indicates that it is
in conformity with the European Union EMC directive
89/336/EEC.
It is also in conformity with section 15 of the FCC
restrictions concerning class B digital devices, which
means that this equipment generates, uses and can
emit radiofrequency waves and, if it is not installed or
used in accordance with the instructions, may cause
interference harmful to radio communications. There
is no guarantee that no interference will occur at a
particular time. If this equipment causes interference
harmful to other devices, try to solve the problem by
changing its position.
Contact an official TISSOT® dealer or an authorized
TISSOT® Service Center if you cannot solve the
problem yourselves. Repair operations are subject to
the following conditions: (1) This instrument must not
cause harmful interference and (2) must withstand
any interference received, including that which could
entail unwanted repair operations.
www.tissot.ch
19/19 119_E / 06-04
Care and maintenance
We advise you to clean your watch regularly with
a soft cloth and
warm water. After immersion in
salty water, rinse it in fresh water and leave it to dry
completely.
Avoid allowing dust and dirt to accumulate in the
slot for the charger plug (use no metallic object to
clean this slot) or in the interstices situated between
the bracelet and the case.
To clean the charger plug slot, simply blow into the
slot to remove the dust from it or use an applicator
slightly steeped in alcohol.
Also avoid leaving your High-T® in places exposed
to major temperature or humidity variations, the rays
of the sun or intense magnetic fields
.
The bracelet of your High-T® contains the antenna
required to receive information. Avoid twisting or
deforming it, so as not to damage the antenna and
thereby prevent satisfactory reception of information.
Do not activate the push buttons under water.
In the event of a violent impact, have your watch
checked by an authorized TISSOT® Service Center.
Never try to open your watch.
For the highest standards of service and to
benefit from the warranty, please always contact
an approved TISSOT® representative. See the list of
"Service Centers" under http://www.tissot.ch/contact/
customerservice.
Warranty
With effect from the date of purchase, TISSOT® S.A.*
grants you a twenty-four (24) month warranty for your
High-T® watch, under the terms defined in the present
warranty document. The TISSOT® international
warranty covers defects of materials and workmanship
existing at the time of delivery of your High-T® watch
("the defects"). The warranty applies only if the
certificate of warranty is dated, filled in completely
and correctly, and stamped by an official TISSOT®**
dealer ("valid certificate of warranty").
During the lifetime of this warranty, and on presentation
of a valid warranty certificate, you are entitled to have
any fault repaired free of charge. In the event of this
repair work failing to restore your High-T® watch to
normal conditions of use, TISSOT® S.A. undertakes
to provide you with an identical replacement High-T®
watch with similar characteristics. The warranty for the
replacement watch expires twenty-four (24) months
after the date of purchase (i.e. date of handover to
customer) of the replacement watch.
This manufacturer's warranty does not cover:
- battery life;
- normal wear and tear and ageing (e.g. scratched
crystal; deterioration of the colour and/or material
of non-metallic straps and chains, such as leather,
textile and rubber);
- any damage to any part of the watch resulting from
abnormal/abusive use, lack of care, negligence,
accidents (knocks, dents, crushing, broken crystal
etc.), incorrect use of the watch and failure to
comply with the operating instructions provided by
TISSOT® S.A.;
- indirect or consequential damages of any kind
resulting from e.g. the use, operating failure, defects
or inaccuracy of your High-T® watch;
- the High-T® watch handled by non-authorized
persons (e.g. for battery replacement, servicing or
repairs) or whose original condition has deteriorated
beyond TISSOT® S.A's control.
This warranty:
- is independent of any warranty that may be granted
by the seller, for which he bears sole responsibility;
- does not affect the purchaser's rights against the
seller nor any other mandatory statutory rights the
purchaser may have against the seller.
The TISSOT® S.A. customer service organization
ensures the perfect maintenance of your High-T®
watch.
If your watch needs care, entrust it to an official
High-T® dealer or to an authorized High-T® Service
Center appearing on the attached list: they can
guarantee a service in accordance with TISSOT® S.A.
standards.
*TISSOT® SA, CH - 2400 Le Locle, Switzerland
**High-T® Specialist Dealer in EU countries
High-T® is a registered trademark
Loading...