RACING-TOUCH
USER’S MANUAL
www.tissot.ch
Acknowledgements
We would like to thank you for choosing a TISSOT
watch, a Swiss brand among the most highly renowned
in the world. Your RACING-TOUCH watch has the most
recent technical innovations. It gives you a constant
analogue time display and a variety of digital displays.
In addition, the following functions can be accessed
simply by touching the glass: Alarm, Compass, Lap time,
Split time, Timer and Tide.
1/13
151_EN
Official service
centers adresses
www.tissot.ch
WARNING
TISSOT TACTILE
WATCHES MUST
ONLY BE SERVICED BY
TISSOT’S AUTHORIZED
CUSTOMER SERVICE
CENTERS, WHICH ARE
LOCATED IN
OVER 160 COUNTRIES
Recommended
service prices
support.tissot.ch
RACING-TOUCH
+
-
27
december
N
S
E
W
OPT
10bar
FUNCTIONS
OPT
Water resistance:
10 bar (100 m / 330 ft)
10bar
Battery type: button type
lithium-manganese dioxide
primary battery cell.
2nd function 2nd function1st function 1st function
+
ACTIVATE
TOUCH-
SENSITIVE
GLASS
W
27
december
N
S
-
E
Low Battery
Ante meridien/
Post meridien
Time zone 1 or 2
Alarm
ACTIVATE
LIGHT
Activate touch-sensitive glass / Activate light
CENTRE – Time 1
CENTRE – Time 2
CENTRE – Date
27
december
CENTRE – Options
OPT
TIDE – Tide schedule
Touch-sensitive glass active
4
4
4
W
5
8
LAP – Lap chronograph
SPLIT – Split chronograph
N
E
COMPASS – Compass
S
ALARM – Alarm
TIMER – Timer/countdown
9
10
11
12
13
www.tissot.ch
3/13
151_EN
RACING-TOUCH
GENERAL USER INFORMATION
Activating the touch-sensitive glass
1 sec.
When the glass is activated, the
«T» symbol will flash on the digital
If the glass is not touched, it will
display.
automatically deactivate after
15 seconds.
Exception: in compass mode,
the glass will deactivate after
30 seconds.
Activating the light Setting mode
Activating the light - The display
light will stay on for 10 seconds.
Touch one of the 7 touch-sensitive
areas of the glass to activate the cor-
Select a function
responding function.
2 sec.
2 sec.
or
: move display and/or hand
position forward
: move the display and/or hand
position backward
If no manipulation for 10 seconds,
the setting mode is deactivated.
Display mode
Activate the glass
Date display =
default display
Time1 display: T1
Time 2 display: T2
Options display
Return to
Date display
NEW-YORK
LONDON
T1
27
december
Activate the glass
SETTING > TIME T1 & T2
T2
Pressing and holding the 2 o’clock (+) or 4 o’clock (-) pushers will move the hands forward or backward. After a full revolution, the
minute hand will stop and the hour hand advances/reverses in steps of one hour. Time T2 is set in steps of 15 minutes.
2 sec.
or
Validate setting
a) The seconds restart at zero
b) The seconds continue
Activate the glass
1 sec.
Time T1 or T2 display
(example: T1)
Setting mode
: forward 1 min.
: back 1 min.
(hands and display)
SETTING > DATE
The calendar is perpetual, i.e. the number of days per month is predefined allowing the watch to correctly indicate the date until 2099. In continuous setting, the days scroll past slowly at first, and then quicker. After a full month, the calendar scrolls in months, and then likewise in years.
2 sec.
1 sec.
Date display
Setting mode
: forward one day
: back one day
or
Validate setting
or
a) b)
or
www.tissot.ch
4/13
151_EN
Loading...