Tissot 113 User Manual

«Moon phases» Watches

User's Manual

LUN JUIN

www.tissot.ch

Display and functions

➊

Hour hand

➋

Minute hand

➌

Small seconds hand

➍

Date indicator

➎

Day of week indicator

➏

Month indicator

➐

Moon phase indicator

Crown with 3 positions (8) :
I

Neutral position (not pulled out)

II

Position for adjusting date, month and moon phase (unscrewed*, half pulled out)

III

Position for setting time and day of the week (unscrewed*, completely pulled out).

Models with a screwed crown

IA Initial position (screwed down, not pulled out)
IB Winding position (unscrewed, not pulled out)

1/2

113_E / 01.03

«Moon phases» Watches

Congratulations

We would like to congratulate you on having chosen a watch from TISSOT ®,
one of the most highly renowned Swiss brands in the world. With its dis­tinctive and nostalgic character and constructed with meticulous care from
the finest materials and components, your watch is protected against shock
loads, variations in temperature, water and dust.

Your watch is equipped with an ultra-flat quartz movement delivering extre­mely high standards of precision and operation and the dial displays hours,
minutes, seconds and date (with day and month), with a moon phase display
programmed for the next 10 years into the future.

After initial setting, all you need to do is to make adjustments to the settings
whenever the battery needs changing. Initial setting of your wristwatch is
performed in accordance with the moon phase calendar provided at the end
of this User Guide.

To ensure that your watch operates with perfect precision for many years to come,
we advise you to pay very careful attention to the advice provided hereafter.

Usage / Settings

Models with a screwed crown

To ensure that they remain water-resistant, some models are fitted with a
screwed crown. Before proceeding to setting the time or the time-zone dial,
you must first unscrew the crown into position IB before pulling it out into
position

II

or

III.
Important : After each operation, you must always screw the crown
back down to ensure that your watch remains water-resistant.

Setting the time

Pull the crown out into position
Turn the crown forwards or backwards until the hands display the correct
time. Once the hour hand passes the 12 o'clock position, you can see if it
indicates midnight (the date changes at this point) or midday (the date does
not change).

Advice on how to synchronise your watch

To synchronise the second hand (3) with an official time signal (radio/TV/
Internet), pull the crown out into position
o'clock. This then stops. Guide the hands into the correct time setting. At the
tone, press the crown back into position I (and tighten it down if you have a
model with a screwed crown).

Setting the day of the week

Pull the crown into position III and move backwards and forwards
between 23 : 00 hrs and 01 : 00 hrs (11 p.m. and 1 a.m.).

Note : Due to the fact that this operation alters the date, this then has to
be corrected by pulling the crown out into position

Setting the date and the month

Pull the crown out into position II and turn it forwards until the correct
date (4) is displayed. During this operation, your watch will continue to
function normally, so you will not need to alter the time.
When the date changes from the 31st to the 1st, the month indicator advances
by one month. Since the display for phases of the moon was programmed in
advance, all you have to do is alter the date on months with less than 31 days.

Setting the phases of the moon

Pull the crown out into position II and turn it forwards until the correct
phase of the moon (7) is displayed.

Note :

For precise adjustment purposes, place the moon phase indicator
on the full moon setting. At this point, each jump of the indicator advances
the setting by one whole day.

III

; the seconds hand (3) stops at this point.

III

when the second hand is at 12

II and turning it.

The moon and its phases

The phases of the moon cycle, from one new moon to the next one, lasts 29 days,
12 hours, 44 minutes and 2.8 seconds. The new moon corresponds to the first
lunar day (fig. 1). The moon is invisible because its dark side is facing us.

On the 8th day (
appears with the curve facing to the right, like the belly of a large « D ». This
shows that the moon is waxing at this point.

fig. 2

), after completing one quarter turn, a crescent moon

1 2

81

fig. 3

On the 15th day of the lunar cycle (
we see a fully illuminated circle, indicating the full moon. The moon at this
point is directly opposite the sun.

On the 23rd day of the lunar cycle (
immediately prior to the last quarter of its cycle, the crescent appears curved
towards the left like a large « C ». This shows that the moon is waning at this
point. A new lunar cycle now commences.

), at the mid-point of its revolution,

fig. 4

), at the end of its third quarter and

34

The moon changes continuously between these characteristic positions.
The time which has elapsed between two new moons corresponds to
approximately one month. This is known as a synodic cycle. The orbit of
planet Earth around the sun describes what is known as an elliptical path,
on a defined plane. Let's represent this plane extending to infinity up to the
point where it intersects the sphere of fixed stars. Alongside this circle is a
range of constellations, familiar to most of us as the constellations of the
zodiac: Aries, Taurus, Gemini, Cancer, Leo, Virgo, Libra, Scorpio, Sagittarius,
Capricorn, Aquarius, Pisces. If it were possible to see stars during daylight
hours, we would observe in the course of a calendar year that the Sun, when
viewed from the Earth, passes in front of each of the twelve constellations
of the zodiac from right to left, being in front of a different constellation at
each point in time. The lunar orbit around the Earth shares almost exactly
the same elliptical plane as the Earth describes around the Sun. It follows
from this that the Moon's orbit also causes it to pass in front of this group
of constellations.

Due to the regular and repetitive nature of this movement and its phases, the
moon has always served as a means of counting the passage of time. Indeed,
this is why the lunar calendar is still used for timekeeping purposes.

We are thus able to order our lives in terms of the lunar cycle. The rhythm
of natural phenomena also has a profound influence on people, animals and
plant-life.

The new quartz TISSOT
ded for hunters, mushroom collectors, fishermen, navigators etc., and for the
enlightened amateur interested in following the trends of modern fashion.

®

watch with lunar cycle function is therefore inten-

Care and maintenance

We would advise you to clean your watch regularly (except for the leather
strap) using a soft cloth and warm soapy water. After immersion in salty
water, rinse it in fresh water and leave it to dry completely.

Do not leave it anywhere where it might be subjected to major variations in
temperature or humidity, in direct sunlight or near strong magnetic fields.

To benefit from the highest standards of service and to ensure your guarantee
remains in force, please always contact an approved TISSOT ® representative
or retailer.
TISSOT ® Quartz watches benefit from the incomparable precision of quartz.
Their power reserve usually enables them to operate for more than 2 years
in continuous use. If you envisage not wearing your watch for several weeks
or months, we would advise you to put it to one side with the crown pulled
out into position II. This cuts the electrical power supply to the motor, thereby
extending battery life considerably.

Replacing the battery

Once the battery has run flat, it must be replaced without delay by an
approved
Type : Renata 373 / Service life : about 3 years.

®

TISSOT

representative or retailer.

www.tissot.ch

2/2

113_E / 01.03