Tisira TOT644E, TOC648E User Manual
TM
USER MANUAL
600 // ELECTRIC OVENS
TOT644E | TOC648E
IMPORTANT // Please ensure that you read through this manual prior to installation and use.
This user manual contains important information to ensure optimal performance and keep you safe.
Please retain your proof of purchase, as this will be needed in the event that you require a warranty
service. Remember to keep this user manual for future reference.
Version 1.0
Electric Oven User Manual
www.tisira.com
Content
Content 2
Warning & Safety Instructions 3-4
Product Overview 5
Product Specications 6
Installation 6-13
Control Panel Overview 13
Using the Oven 17
Digital Timer/Clock Instructions 18-21
Replacing the Oven Lamp 22
Cleaning the Oven Glass 22
Cleaning the Oven Door 23
Maintenance & Cleaning 24
Steam Cleaning 24
Accessories (Optional) 25
Trouble Shooting 25
Notes 26-27
Page 2 Electric Oven User Manual
Warning & Safety Instructions
IMPORTANT // To ensure best performance, avoid risk of damage or accidents.
Please read the operating instructions prior to rst time use.
To maintain the eiciency and safety of this
appliance, we recommend that you do the
following:
• Only call the Service Centers authorized by
the manufacturer.
• Always use original spare parts.
• In case of damage to the power cord,
a special purpose cord or component
bought from the manufacturer or
maintenance department shall be used for
replacement.
When handling the appliance, we
recommend you always use the purpose
provided handles recessed into the sides
of the oven to prevent harming people or
damaging the appliance itself.
This appliance is designed for noncommercial, house-hold use and its functions
must not be changed .
The electrical system of this appliance can
only be used safely when it is correctly
connected to an eicient earthing system in
compliance with current safety standards.
WARNING // Accessible parts may become
hot during use. To avoid burns, young children
should be kept away.
WARNING // Accessible parts may become
hot when the grill is in use. Children should
be kept away.
WARNING // This appliance is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
WARNING // Children should be supervised
to ensure that they do not play with the
appliance.
The following items are potentially
dangerous, and therefore appropriate
measures must be taken to prevent children
and the disabled from coming into contact
with them:
• Controls and the appliance in general;
• Packaging (bags, polystyrene, nails, etc.);
• The appliance itself, immediately aer
use of the oven or grill due to the heat
generated;
• The appliance itself, when no longer in
use (potentially dangerous parts must be
made safe).
Avoid the following:
• Touching the appliance with wet parts of
the body.
• Using the appliance when barefoot
• Pulling on the supply cable to unplug it
from the electrical outlet.
• Improper or dangerous operations;
• Obstructing the ventilation or heat
dissipation slots.
Electric Oven User Manual Page 3
Warning & Safety Instructions
• Allowing power supply cables of small
appliances to come into contact with the
hot parts of the appliance.
• Exposing the appliance to atmospheric
agents such as rain or sunlight.
• Using the oven for storage purposes;
• Using ammable liquids near the
appliance
• Using adapters, multiple sockets and /or
extension leads.
• Attempting to install or repair the
appliance without the assistance of
qualied personnel.
Qualied personnel must be
contacted in the following cases:
• Installation (following the manufacturer’s
instructions).
• When in doubt about operating the
appliance.
• Replacing the electrical socket when it is
not compatible with the appliance plug.
• Damaged thermostat - The temperature
probe is part of the thermostat and an
authorised service agent should replace
the entire assembly. Only use temperature
probes recommended for this oven.
• If in doubt about the soundness of the
appliance aer removing it from its
packaging.
• If the power supply cable has been
damaged or needs to be replaced.
• If the appliance breaks down or functions
poorly; ask for original spare parts.
NOTICE // The manufacturer may not be
held responsible for any damage due to:
Incorrect installation, improper, incorrect and
irrational use.
• Steam cleaner cannot be used to clean the
oven.
• Only use the appliance to cook food and
nothing else.
• Disconnect the appliance from the
electrical mains if it is not functioning
properly and before cleaning or
performing maintenance.
• When le unused, unplug the appliance
form the electricity mains.
• Use oven gloves to place cookware in the
oven or when removing it.
• Make sure the knobs are in the “0” position
when the appliance is not in use.
• Never line the bottom of the oven with
aluminium foil.
• Never rest pots or pans on the bottom
of the oven cavity as it may damage the
enamel coating.
Page 4 Electric Oven User Manual
Product Overview
1. Control Panel
2. Deep Tray*
3. Roast Chicken Skewer*
7. Lamp
8. In Tray Wire Grill
9. Standard Tray
4. In Tray Wire Grill
5. Standard Tray
6. Oven door
Electric Oven User Manual Page 5
Product Specifications
Specifications TOT644E and TOC648E
Lamp Power 15-25W
Thermostat 40-240 / Max °C
Lower Heater 1200W
Upper Heater 1000W
Turbo Heater 1800W
Grill Heater Small Grill 1000W Big Grill 2000W
Supply Voltage 220V-240V 50/60 Hz
Technical specifications can be changed without prior notice to improve product quality.
The values provided with the appliance or its accompanying documents are laboratory
readings in accordance with the respective standards. These values may differ depending on
the use and ambient conditions. Figures in this guide are schematic and may not be exactly
match your product.
Installation
Ensure that electrical installation is suitable for operationalising the appliance. If not, call
an electrician and plumber to make necessary arrangements. Manufacturing firm can’t
be hold responsible for damages to arise due to operations by unauthorized people and
product warranty becomes void.
WARNING: It is customer’s responsibility to prepare the location the product shall be placed
on and also have power utility prepared.
Page 6 Electric Oven User Manual
Installation
WARNING: The rules about electrical local standards must be adhered to during product
installation.
WARNING: Check for any damage on the product before installing it.
Do not have product installed if it’s damaged. Damaged products pose danger for your
safety.
Important Warnings for Installation:
Cooling fan shall take extra steam out and prevent
outer surfaces of appliance from overheating during
operation of oven. This is a necessary condition for
better appliance operation and better cooking.
Cooling fan shall continue operation after cooking is
finished. Fan shall automatically stop after cooling
is completed.
A clearance must be left behind the enclosure where
you’ll place the appliance for efficient and good
operation. This clearance shouldn’t be ignored as
it’s required for ventilation system of the appliance
Figure 1
to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from market. A safe
distance must be left between the product and kitchen walls or furniture. See the drawing
provided on the next page for proper distances. (values in mm).
• Used surfaces, synthetic laminates and adhesives must be heat resistant. (minimum 100°C).
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between oven and drawer.
WARNING: Do not install the product next to refrigerators or coolers. The heat emitted by
the product increases the energy consumption of cooling devices.
WARNING: Do not use door and/or handle to carry or move the product.
Electric Oven User Manual Page 7
Installation
60 cm Built-In Oven Installation and Mounting
Place of use for product must be located before starting installation. Product mustn’t be
installed in places which are under the eect of strong air ow. Carry the product with minimum
two people. Do not drag the product so that oor isn’t damaged.
Remove all transportation materials inside and outside the product. Remove all materials and
documents in the product.
Installation Under Counter
Cabin must match the dimensions provided in Figure 2. A clearance must be provided at the rear
part of the cabin as indicated in the gure so that necessary ventilation can be achieved.
Aer mounting, the clearance between lower and upper part of the counter is indicated in Figure
5 with “A”. It’s for ventilation and shouldn’t be covered.
Installation In An Elevated Cabinet
Cabin must match the dimensions provided in Figure 4. The clearances with the dimensions
indicated in the gure must be provided at the rear part of cabin, upper and lower sections so
that necessary ventilation can be achieved.
Installation Requirements
Product dimensions are provided in the Figure 3. Furniture surfaces for mounting and mounting
materials to be used must have a minimum temperature resistance of 100 °C.
Mounting cabin must be secured and its oor must be plane for product not to tilt over.
Cabin oor must have a minimum strength that would handle a load of 60 kg.
Placing and Securing the Oven
Place the oven into the cabin with two or more people.
Ensure that oven’s frame and front edge of the furniture match uniformly.
Page 8 Electric Oven User Manual
Installation
Supply cord mustn’t be under the oven, squeeze in between oven and furniture or bend.
Fix the oven to the furniture by using the screws provided with the product. Screws must
be mounted as shown in Figure 5 by passing them through plastics attached to frame of the
product. Screws mustn’t be overtightened. Otherwise, screw sockets might be worn.
Check that oven doesn’t move aer mounting. If oven isn’t mounted in accordance with
instructions, there is a risk of tilt over during operation.
Electrical Connection
Mounting place of the product must have appropriate electrical installation.
Network voltage must be compatible with the values provided on type label of product.
Product connection must be made in accordance with local and national electrical
requirements.
Before starting the mounting disconnect network power. Do not connect the product to network
until its mounting is completed.
Mounting
Figure 2
Electric Oven User Manual Page 9
Loading...