Tiptop µZEUS User Manual

TM

ZEUS Series:

microZEUS

Power Supply

Zeus Series: microZEUS with Flying Bus Boards

The uZEUS is a 4HP power supply module for Eurorack format synthesizers.
This version features four standard spade terminals to connect to rigid bus
boards like the ZEUS Passive Bus Boards. Connection diagram is provided at
the end of this manual.

Provided with the module is a 1000mA +15VDC unregulated wall adapter
with a 2.5mm positive center pin connector.

Tiptop Audio has the following recommendations for connecting your
modules and using your uZEUS:

To insure long life for the power supply, you should be aware of the total power
consumption of your system. This is determined by adding together the amount
of current used by each of your modules. Please refer to the power consumption
gures provided by your modules’ manufacturer(s).

The uZEUS is designed to power systems ranging from 3U to 6U. Although the
uZeus may have the capability to power even more modules, do not overload
the external adapter.

It is important to note that the front panel of the uZEUS may get very warm.
Please do not be alarmed, as this is normal and is part of the standard operation
of the uZEUS.

WARNING: The internal components of the uZEUS can get very hot. Do not
touch the internal components while the uZEUS is connected and/or powered.

TM