TIPTEL Ergophone 12 Operating Instructions Manual
Operating instructions (en)
Ergonomic number dialler,
clear layout, easy to operate
Ergophone 12
tiptel
Safety notices
3
Safety notices
Please observe the following notices very closely when setting up,
connecting and operating the Ergophone 12:
Only connect the connection cables to sockets designated for
this use.
Install the connection cables in a safe manner. Connected cables
must not be subjected to excessive mechanical stress.
Set up the device far from electrical interference.
Only connect accessories which are permitted with this device.
Never open up the device yourself. Do not allow the plug con-
tacts to touch sharp or metallic objects.
Only clean the device with a soft, damp cloth. Do not use chemi-
cals or abrasive cleaners.
Protect the device from damp, dust, liquids and vapours.
Do not expose the device to direct sunlight.
Do not use the device in potentially explosive atmospheres.
Only use the original telephone connection cable.
Controls
4
Controls
To put a photograph onto a key, simply remove the Perspex
glass cover, put your chosen photograph in and re-attach the
Perspex glass cover.
Contents
5
Contents
Safety notices ........................................................................... 3
Controls ..................................................................................... 4
Contents .................................................................................... 5
Service ....................................................................................... 6
Scope of delivery .................................................................. 6
Setting up .............................................................................. 6
Connecting ........................................................................... 6
Direct dial mode ........................................................................ 8
Saving phone numbers ........................................................ 8
Making a call with direct dial keys ........................................ 9
Numeric keypad mode ............................................................. 10
Toggling to numeric keypad mode ...................................... 10
Making a call with numerical keys ........................................ 10
Default setting ........................................................................... 11
Setting up the default setting ................................................ 11
Appendix ................................................................................... 12
Service .................................................................................. 12
Guarantee ............................................................................. 12
CE sign ................................................................................. 14
Ecological information .......................................................... 14
Troubleshooting .................................................................... 15
Technical specifications ....................................................... 16
Index .......................................................................................... 17
Service
6
Service
Scope of delivery
Included in the packaging of your Ergophone 12 are:
Ergophone 12
Connection cables
Operating instructions
Setting up
Your Ergophone 12 has been manufactured for normal conditions of
use. Solvents in furniture lacquers, wood oils and paint preservatives
may corrode the device feet. Device feet altered in this way may then
leave stains on furniture.
Therefore always use a non-slip base, especially with new or recently treated furniture.
Connecting
You must attach all necessary cables before you can start using
your Ergophone 12.
1 Disconnect the existing telephone cable from the telephone
and insert the free connector into the "LINE" jack.
2 Insert the connection cable provided into the telephone with
one
connector and into the "TEL" jack with the other connector.
Loading...