Tinplate IVES 3245R Operator's Manual

Compatibility

This engine will operate on any
traditional Standard Gauge tubular track
system, including M.T.H.’s tubular track.
It is also compatible with most standard
AC transformers. (See page 7 for a
complete list of compatible transformers
and wiring instructions.)

PLEASE READ BEFORE USE AND SAVE

Tinplate IVES 3245R

Electric Locomotive

OPERATOR’S MANUAL (TRADITIONAL)

By MTH Electric Trains®

INPLATE

T

INPLATE

T

®

RADITIO NS

T

RADITIO NS

T

Table of Contents

Set Up Checklist...........................................................................................................

Lubrication.......................................................................................................

Couplers...........................................................................................................

Basic Operation.............................................................................................................

Maintenance...................................................................................................................

Lubricating and Greasing Instructions.........................................................

Cleaning The Wheels, Tires and Track.........................................................

Headlight Replacement Instructions.............................................................

Transformer Compatibility and Wiring Chart..............................................

Service & Warranty Information....................................................................

CAUTION: ELECTRICALLY OPERATED PRODUCT:
Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 - 16.
As with all electric products, precautions should be observed during handling and use to reduce the risk of electric shock.

WARNING: When using electrical products, basic safety precautions should be observed, including the following:

Read this manual thoroughly before using this device.

l M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment

periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary
cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until
properly repaired.

l Do not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your layout.
l This train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result.
l Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case.

3
3
3

4

5
5
6
6
7
8

This product may be protected by one or more of the following patents:
6,019,289; 6,280,278; 6,281,606; 6,291,263; 6,457,681; 6,491,263; 6,604,641;
6,619,594; 6,624,537; 6,655,640.

©2005, M.T.H. Electric Trains, Columbia, MD 21046

Set Up Checklist

- Lubricate the locomotive

- Apply power to run as described in the Basic Operating Section of this manual.

Lubrication

You should lubricate the engine to prevent it from squeaking. Use
light household oil and follow the lubrication points marked “L” in
Fig. 1. Do not over-oil. Use only a drop or two on each pivot point.

Couplers

The couplers on your Ives 3245 R Electric Locomotive are faithful reproductions
of the couplers that were originally supplied with the Ives 3245R. They are
designed to couple with Ives rolling stock.

If you wish to use this engine to pull a train of 200 series cars, a set of Latch Style
couplers are packed in the styrofoam box for your convenience.

To install the 200 series style latch couplers simply remove the screw in the center
of the pilot, pull out the Ives coupler and replace it with the latch style coupler and
replace the screw.

Tinplate IVES 3245 R Electric Locomotive

3

DO NOT

OVER OIL

DO NOT

OVER OIL

DO NOT

OVER OIL

Figure 1. Lubrication Points on the Locomotive

Lubricate Pick Up Rollers Axles (L)

Lubricate Wheel Axles (L)

Lubricate Wheel Axles (L)

Bushings

Basic Operation

The Throttle knob controls how fast your train will travel.

Turn the throttle knob up ½-way, until the engine lights shine bright.

Put the engine into motion by pressing the Direction button on your transformer
once. (hold it for approximately 1 second)

If the engine does not begin to move as soon as you firmly press the Direction
button, you may not have sent enough voltage to the track to make the train move.
Turn the throttle up a bit higher until the train begins to move.

Cycle Phases

Neutral

Neutral

ForwardReverse

Tinplate IVES 3245 R Electric Locomotive

4