Page 1
(User Manual-TH3)
Contact Information:
TiMOTION Technology Co., Ltd.
Shiyong Minying Industrial Zone, Hengli Town, Dongguan City, GuangDong
Province, China
Symbol Descriptions
The following symbols may appear in this manual, on the label, or on its accessories. Some of the symbols
represent standards and compliances associated with the TH3 and its use.
Caution: C
CE M
Directives.
The product
DISPO
separat
Direct curr
onsult accompanying documents
ark: conform with the essential health and safety requirements set out in European
can be used indoors only.
SAL: Do not dispose this product as unsorted municipal waste. Collection of such waste
ely for special treatment is necessary.
ent
Environmental Requirements
Operation conditions
Ambient temperature: 10 ~ ℃ 40℃
Relative humidity range: 10% ~ 93%
Atmospheric pressure: 86KPa~ 106Kpa
Storage and shipping conditions
nt temperature: -10 ~ ℃ 50℃
Ambie
Relative humidity range: 10% ~ 93%
Atmospheric pressure: 86KPa~ 106KPa
1/3 2018.1.22
Page 2
(User Manual-TH3)
Specifications:
Model No. :
Battery :
Dimensions :
Transmit frequency
Data Transmit mode GFSK
Applications :
Chairs and beds Remote controls.
Other electric furniture controls.
Use:
Button function, see the attached diagram
Electrical performance:
1. A23 12V use alkaline battery-powered, Operating Current≦18mA
2.Wireless remote control distance of ≧6 meters
TH3
12V SizeA23 *1
115.7*56.7*20mm
2402-2480MHz
3.Standby operating current ≦ 10uA
Size and Funtion Diagram :
M
1UP M1DOWN
FR
ONT FUNTIONSIDEBACK
2/3 2018.1.22
Page 3
(User Manual-TH3)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: The Grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. such modifications could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
3/3 2018.1.22
Loading...