TIMO ILMA 901 User guide

INSTRUCTION

SH OW ER C AB IN I LM A 90 1

pag e

1

2

pag e

27

Leak-protection

switch works

Smoke comes

from steam

output, or bad

smell

Get an electric

shock, but the

leak-protection

switch doesn’t

work.

26

3. The signal wire between the Electric Box and Steam Generator doesn’t connect

well. (Connect it)

4. The wire of the heater between Electric Box and Steam Generator doesn’t

connect well. (Connect it )

5. Anti-dry heating protection works. (Restore)

6. The water inlet valve is broken ( Replace it)

7. Steam Generator or Electric Box is broken. (Replace it)

1. Leakage of the AC220V power supply. ( Bind it)

2. Leakage of the heater inside the steam generator. ( Replace it )

3. The leak -protection switch is not good. ( Replace it )

1. Inside the Steam Generator, the water level wire is in short circuit or there is

water in the level sensor.

( Debug the short circuit and dry the level sensor)

2. Steam Generator or Electric Box is broken. (Replace it)

The ground wire doesn’t connect well. (Please make sure that the ground wire of

the shower room connect the ground well)

8. Special Declaration:

When this product needs repair, please contact the qualified technician from dealer, otherwise

it will be not free.

7