Timex W217 NA User Manual

W217 NA 111-095009

English page 2

Français page 28

Español página 58

Português página 88

TIMEX®WATCHES

Congratulations on purchasing your TIMEX®watch.
Please read these instructions carefully to

understand how to operate your Timex timepiece.
Your watch may not have all of the features

described in this booklet.

For more information, please visit:

www.timex.com

ENGLISH

TABLE OF CONTENTS

2 How to Start Your Watch
3 Water and Shock Resistance
4 Indiglo
5 Date Models
7 Day/Date Models
8 Easy Set Alarm
12 Perpetual Calendar
15 Elapsed Time Ring
17 Tachymeter Ring
18 Compass Ring
19 How to Adjust Bracelet
21 Bracelet Link Removal
22 Battery
23 Warranty

®

Night-Light

ENGLISH

ENGLISH

HOW TO START YOUR WATCH

To start your watch remove the plastic guard from
under the crown, then press the crown in against
the case. The second hand will begin advancing in
one-second intervals.

Some deep-depth water-resistant watches require
the setting crown to be screwed in to secure
water-resistance. If your watch case has a protrusion
with screw threads, the crown must be screwed in
after setting the watch.

To screw in, push the crown firmly against the
threaded protrusion and hold in while turning the
crown clockwise. Continue to screw in the crown
until it is tight. You will need to unscrew the crown
(counter-clockwise) before pulling it out the next time
you want to set your watch.

2

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking
(WR_M) is indicated.

Water-Resistance Depth p.s.i.a. * Water pressure

30m/98ft 60

50m/164ft 86

100m/328ft 160

200m/656ft 284

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE,
DO NOT PRESS ANY BUTTONS OR PULL OUT
THE CROWN UNDER WATER UNLESS YOUR
WATCH IS INDICATED AS 200 METER WATER­RESISTANT.

Below Surface

3