1
BLOOD PRESSURE
MONITOR
Professional Series
with Advanced
Accuracy Technology
Battery Cover
Digital Display
AAT Mode is On
Memory Button
User/Time Button
Print Button
AAT Select Button
Power On/Off Button
Start Button
INTRODUCTION
Features of your Professional Series Upper Arm Blood Pressure Monitor Model # 80222
are as follows.Your blood pressure monitor is a fully automatic, digital blood
pressure measuring device with integrated AAT mode for use on the upper arm.
This monitor enables very fast and reliable measurement of the systolic and diastolic
blood pressure as well your pulse by use of the oscillometric method. This device
is easy to use and is proven in clinical studies to provide excellent accuracy.
The large display makes it easy to view operational status and cuff pressure
during a measurement. Please read through this instruction manual carefully before
use and then keep it in a safe place. For further questions on the subject of blood
pressure and its measurement, please consult your doctor.
Important information about self-measurement
• Self measurement means Control, not diagnosis or treatment.Your measurements
should be discussed with your doctor. You should never alter the dosages of any
medication without direction from your doctor.
• The pulse reading is not suitable for checking heart pacemakers.
• If you have been diagnosed with a severe Arrhythmia or irregular heartbeat, measurements made with this instrument should only be evaluated after consultation
with the doctor.
Electromagnetic interference
This device contains sensitive electronic components.Avoid strong electrical or electromagnetic fields in the direct vicinity of the device (e.g. cellular phones, microwave
ovens) Electrical interference can lead to temporary impairment of the measuring
accuracy.
IMPORTANT INFORMATION ON BLOOD PRESSURE AND ITS
MEASUREMENT
How does high/low blood pressure arise?
Your blood pressure level is determined in the circulatory center of your brain. Your nervous system allows your body to
adapt or alter blood pressure in response to different situations.Your body alters your
pulse and the width of blood vessels through changes in muscles in the walls of
blood vessels.Your blood pressure reading is highest when your heart pumps or ejects
blood. This stage is called your systolic blood pressure.Your blood pressure is lowest
when the heart rests between beats.This is called your diastolic blood pressure. It is
critical to maintain blood pressure values within a "normal" range in order to prevent
particular diseases.
Which values are normal?
Blood pressure is too high if, at rest, the systolic blood
pressure is over 140mmHg and/or the diastolic pressure is above 90mmHg. If you
obtain readings in this range, you should consult your doctor. High blood pressure
values over time can damage blood vessels, vital organs such as the kidney or your
heart. Should the systolic blood pressure values lie between 140mmHg and
160mmHg and/or the diastolic blood pressure values lie between 90mmHg and
100mmHg, consult your doctor. Regular self checks may be necessary.When blood
pressure values are too low, i.e. systolic values under 100mmHg and/or diastolic
values under 60mmHg, consulting your doctor may be necessary. Even with normal
blood pressure values, a regular self check with your blood pressure monitor is recommended. In this way you can detect possible changes in your values early and react
appropriately. If you are undergoing medical treatment to control your blood pressure,
please keep a record of the level of your blood pressure by carrying out regular self
measurements at specific times of the day.You should show these values to your
doctor.
Never use the results of your measurements to independently alter
drug doses prescribed by your doctor.
Further information
• If your values are mostly "normal" under resting conditions but exceptionally high
under conditions of physical or psychological stress, it is possible that you are suffering from so-called "labile hypertension" (frequently changing levels of elevated
blood pressure). In any case, please discuss the values with your doctor.
What can be done, if regular increased/low values are obtained?
Increased
blood pressure values (various forms of hypertension) over time are associated with
considerable risks to health. Blood vessels in your body are endangered due to
constriction caused by deposits in the vessel walls (arteriosclerosis). This can result in
a deficient supply of blood to important organs (heart, brain, muscles). Additionally,
the heart will become structurally damaged. There are many different causes of high
blood pressure.We differentiate between the common primary (essential) hypertension, and secondary hypertension. Secondary hypertension can cause organ malfunctions. Please consult your doctor for information about the possible origins of your
own increased blood pressure values.
There are lifestyle changes you can make to prevent and reduce high blood pressure.
These measures must be part of a healthy lifestyle and include:
Eating habits
• Maintain a normal weight as prescribed by your doctor.
• Avoid excessive consumption of salt.
• Avoid fatty foods.
Previous/Existing illnesses
• Follow consistently any medical instructions for treating previous illness such as:
• Diabetes (Diabetes mellitus)
• Fat metabolism disorder
• Gout
Habits
• Eliminate smoking
• Drink only moderate amounts of alcohol
• Restrict your caffeine consumption (coffee)
Physical conditioning
• After a preliminary medical examination, exercise regularly.
• Choose sports which require endurance.
• Avoid over-exertion.
• With previous illnesses and/or an age of over 40 years, please consult your doctor
before beginning your exercise routine.
Your physician will help you develop an exercise routine that is appropriate for you.
AAT Mode (Advanced Accuracy Technology)
• "AAT Mode" is a new type of concept for optimum reliability in self-measurement
of blood pressure.
• An advanced accuracy measurement is achieved by the automatic analysis of three
successive measurements.
• The new system provides reliable values for the doctor and can be used as the basis
for reliable diagnostics and medication therapy for high blood pressure.
Why AAT?
• Human blood pressure can rise and fall rapidly.
• Three measurements allows for adjustments to abnormalities in the reading such as
exertion or movement.
Model# 80222
2
Key advantages
Reduction of errors:
• Insufficient rest prior to measurement
• Movement
• Improper cuff positioning
Medical benefits
• Improved accuracy
• Reliable patient self-measurement data for the doctor
• Safe hypertension diagnostic
• Reliable therapy control
Measurement sequence
• With the full measurement cycles, the total measurement time remains less than
3 minutes, compared to a single measurement time of 1 minute.
• Single results are not displayed
• Due to the "Data Analysis" result, a 4th measurement may be applied
COMPONENTS OF YOUR BLOOD PRESSURE MONITOR
The illustration shows the TIMEX Professional Series Upper Arm Blood Pressure
Monitor model #80222, consisting of:
USING YOUR BLOOD PRESSURE MONITOR
Inserting the batteries
Insert batteries immediately after unpacking the unit. The
battery compartment is located on the back of the device
(see illustration).
a) Flip-down cover as illustrated.
b) Insert the batteries 4 x AAA observing the
indicated polarity.
c) If a battery warning appears in the
display, the batteries are low and
must be replaced.
• After the battery warning appears, the device will not
work until the batteries have been replaced.
• Please use 'AAA' Long-Life.The use of rechargeable
batteries is not recommended.
• If your blood-pressure monitor is left unused for long
periods, please remove the batteries from the device.
Functional check:
Hold on the O/I button down to test all the display
symbols.When functioning correctly all symbols must
appear.
Using the AC adapter (included)
It is possible to operate this blood pressure instrument,
with a TIMEX AC adapter (output 6 V DC / 600 mA with
DIN plug).
a) Plug the AC plug into the socket at the back of the
instrument.
b) Plug the AC adapter into a 230V or 110V power socket.
Test that power is available by pressing the O/I button.
Note:
• No power is taken from the batteries while the AC
adapter is connected to the instrument.
• If power is interrupted during the measurement
(e.g. by accidental removal of the AC adaptor from the
socket, the instrument must be reset by removing the
plug from its socket and re-inserting the connections.
• Please consult customer service (1-800-422-0360) if you have questions relating to
the AC Adaptor.
Cuff Connection
Insert the cuff tube into the opening provided on the left side of the instrument,
as shown in the diagram.
Setting the Time and Date
This blood-pressure monitor automatically records
the time and date of each measurement. This is very
important information as blood pressure normally
varies over the course of a day.After new batteries
have been inserted, the time/date display shows the
following setting: 2000-01-01 00:00. (year-month-daytime) You must then re-enter the date and current time.
Please proceed as follows (Example: Entering
(year-month-day-time) 2001-06-15 Time 09:30):
1. First turn the unit on.Then press and hold the
User/Time button for at least 3 seconds.The display
now indicates the set year, during which the four
characters blink.
2. The correct year can be entered by pressing the
MEMORY button. Once for each change.
(Example: 1 x press).
3. Press the User/Time button again.The display now switches to the current date,
and the month blinks.
4. The current month can now be entered by pressing the MEMORY button.
Note: Holding the button down speeds up the procedure.
5. Press the User/Time button again.The day is now blinking.
6. The current day can now be entered by pressing the MEMORY button.
7. Press the User/Time button again.The display now switches to the current time,
and the hour blinks along with the AM/PM indicators.
8. The corresponding hour (including AM/PM) can now be entered by pressing the
MEMORY button.
9. Press the User/Time button again.The minutes now blink.
10. The minutes can now be entered by pressing the MEMORY button.
Remember, you may hold the button to scan values.
11. Reading the set date:After all settings have been entered, click the User/Time
button once.The date is briefly displayed and then the time.The input is now confirmed and the clock begins to run.
CARRYING OUT A MEASUREMENT
Before the measurement:
• Avoid eating or smoking as well as all forms of exertion directly before measurement. All these factors influence the measurement result. Relax by sitting in an armchair in a quiet atmosphere for about ten minutes before measurement.
• Remove any garment that fits closely to your upper arm.
• Always measure on the same arm (normally left).
• Take measurements regularly at the same time of day, since blood pressure changes
during the course of the day.
Common sources of error:
Note: Comparable blood pressure measurements always require the same conditions.
These are normally always restful conditions.
• All efforts by the patient to hold up the arm can increase blood pressure. Make sure
you are in a comfortable, relaxed position and do not activate any of the muscles in
the measurement arm during measurement. Use a cushion for support if necessary.
Medium Cuff
Memory Button
Power On/Off
User/Time Button
Print Button
AAT On/Off Button
Start Button
User/Time Button
Memory Button
3
• If the arm artery lies considerably lower or higher than the heart, a false reading
might be obtained. Each 15cm difference in height could result in a measurement
error of 10mmHg.
• Cuffs that are too narrow or too short result in false measurement values. Selecting
the correct cuff is of extraordinary importance.The cuff size is dependent upon the
circumference of the arm (measured in the center). The permissible range is printed
on the cuff. If this is not suitable for your use, please call 1-800-422-0360 for a
large cuff (model # 80222).
Note: Only use clinically approved TIMEX cuffs! Other brands will not work with this
monitor.
• A loose cuff or a sideways protruding air pocket causes false measurement values.
• With repeated measurements, blood accumulates in the arm, which can lead to
false results.
Fitting the Cuff
a) Position the cuff flat on a table with the hook
and loop side down. Pass the end of the cuff
through the metal loop so that a circle is formed.
The hook and loop closure will now be facing
outwards. (Ignore this step if the cuff has already
been prepared.)
b) Push the cuff over the left upper arm so that
the tube points in the direction of the lower arm.
c) Lay the cuff on the arm as illustrated. Make
certain that the lower edge of the cuff lies
approximately 1 inch (2 to 3 cm) above the elbow and
that the rubber tube leaves the cuff on the inner side of the arm.
d) Tighten the free end of the cuff and close the cuff by affixing the hook and loop.
e) The cuff should be snug on your upper arm so that you can fit 2 fingers between
the cuff and your upper arm. Any piece of clothing which restricts the arm (e.g. a
pullover) must be taken off.
f) Secure the cuff with the Velcro closer in such a way that it lies comfortably and is
not too tight. Lay your arm on a table (palm upwards) so that the cuff is at the same
height as the heart. Make sure that the tube is not kinked.
If it is not possible to fit the cuff to your left arm, it can also be placed on the right.
However, all measurements should be made using the same arm.
Measurement mode selection
Clinical studies demonstrate taking multiple blood pressure readings and calculating
an "average" is more likely to determine your true blood pressure. Your TIMEX
Professional Series Upper Arm with AAT mode allows you to switch the unit into a
special Advanced Accuracy Mode setting (AAT) that automatically takes multiple
readings.
Average Mode / AAT:
a) If you would like to take an AAT Mode measurement, please slide the switch to the
right toward number 3.
b) AAT mode takes generally 3 measurements in
succession and calculates the result.
c) An "AAT" symbol in the display indicates that the
unit is set to the Advanced Accuracy Technology Mode.
Single mode:
a) If you would like to take single measurement, please
slide the switch toward number 1.
b) Single mode only completes 1 measurement.
User selection:
This advanced blood pressure monitor allows you to track blood pressure readings for
2 individuals independently.
a) Before measurement, make sure
you set the unit for the intended user.
The unit can track results for 2
individuals. (User 1, User 2)
b) The unit is set to User 1. Press the
User/Time button to change to User 2.
c) Press the User/Time button again to change into User 1.
d) We suggest the first person to take their pressure to be User 1.
Measuring Procedure:
After the cuff has been appropriately positioned, the measurement can begin:
a) Press the START button. The pump begins to inflate the cuff. The rising pressure in
the cuff is shown in the display.
b) After the suitable inflation pressure has been reached, the pump stops and the
pressure gradually falls.The cuff pressures are displayed. In case that the inflation
pressure is not sufficient, the monitor automatically re-inflates to a higher level.
c) When the instrument detects a pulse, the heart symbol in the display starts to flash
and a beep is heard for every heartbeat.
d) A longer beep is sounded when the measurement has been completed.
The systolic and diastolic blood pressures and pulse rate now appear in the display.
e) The measurement readings remain on the display until you switch off the instru-
ment. If no button is pressed for a period of 5 minutes the instrument switches itself
off in order to preserve the batteries.
f) When the unit is set to Advanced Accuracy Mode setting, 3 separate measurements
will take place in succession and calculates your detected blood pressure value. There
will be 15 seconds resting time in between each measurement. A count down indicates the remaining time and a beep will sound 5 seconds before the 2nd and 3rd
readings will begin. In case that the single data of each cycle differ too much from
each other, a fourth measurement is performed before the result will be displayed. In
rare cases the blood pressure is so unstable that even after four measurements the
data varies too much. In this case "ERR 6" is shown and no result can be given. If
one measurement causes an error message it is repeated.
Discontinuing a Measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g. you
don’t feel well), the O/I button can be pressed at any time. The device immediately
lowers the cuff pressure automatically.
Memory - recall of measurements
This blood pressure monitor automatically stores each of the last 30 measurement
values separated for 2 users. By pressing the MEMORY button, the last measurement,
e.g. (MR30) as well as previous 29 measurements (MR29, MR28, …MR1) can
be displayed one after the other. Data obtained in AAT Mode indicated by an "A"
symbol.
Further Information
When the unit is in the AAT Mode, time between measurements
is carefully controlled to ensure accuracy. If you take successive
measurements when the unit is in the single measurement
mode, wait for several minutes in a relaxed position,
sitting or lying, before you repeat a measurement.
Make sure all measurements are taken in a
seated position.
Memory– cancellation of all measurements
Before you delete all readings stored in the memory,
make sure you will not need to refer to any of the
readings at a later date. Keeping a written record is
important and may provide additional information for
your doctor’s visit. In order to delete all stored readings,
depress the MEMORY button for at least 7 seconds, the
display will show the symbol " CL" and 3 short beep
sounds will be heard to indicate deletion of stored
readings.
Note: If your last stored measurement was taken in the AAT Mode,you will see the
"A" symbol in approximately 3 seconds during the deletion procedure. (The display
will show these symbols during deletion of all stored measurements if the last
measurement is taken from in the AAT Mode)
PRINTER FUNCTIONS
This unit can be used in connection with the diagnostic
printer. The unit can print out measurements stored in the
memory by pressing the PRINTER button. There are 2
kinds of formats available. Please make sure you set the
unit to User 1 or User 2 based on the data you want to
print.
AAT Mode Button
User/Time Button
AAT Mode
is On
Memory Button
Printer Button
4
Note: Printer may be purchased by calling 1-800-422-0360 or on-line at www.timexhealthcare.com.
How to print the last stored measurement. (Single data print)
a) Select correct printer objective first before you press the PRINTER button.
b) Connect the printer with the monitor and switch the printer on (for details please
refer to the manual of the printer).
c) Press the PRINTER button of the monitor once.The display will show "Pr1" and the
printer will print the last stored measurement for User 1 or 2 based on your selection.
How to print all measurements stored in memory and a data chart, (data
print out with chart).
a) Select correct printer objective first before you press the PRINTER button.
b) Connect the printer with the monitor and switch the printer on (for details please
refer to the manual of the printer).
c) Press the PRINTER button for at least 3 seconds.The display will show "Pr1" fol-
lowed by "Pr2".
d) Release the button, and the printer will print all stored measurements with a corre-
sponding chart.
Stop printing
If you would like to stop printing, press the PRINTER button during the printing
process.
NOTE: Further details regarding the printer can be found in the printer instruction
manual.
ERROR MESSAGES/MALFUNCTIONS
If an error occurs during a measurement, the measurement is discontinued and a corresponding error code is displayed.
ERROR CHART
Other possible malfunctions and possible solutions: If problems occur when using the
device, the following points should be checked and if necessary, the corresponding
measures are to be taken:
Malfunctions Remedy Chart
If an error occurs during a measurement, the measurements are
discontinued and a corresponding error code is displayed. (example: error no. 1)
Error No. Possible cause(s)
Err 1 The systolic pressure was determined but afterwards the cuff
pressure fell below 20 mmHg. This situation can occur, for
example, if the tube becomes unplugged after the systolic
blood pressure has been measured. Further possible cause:
No pulse has been detected
Err 2 Unnatural pressure impulses impair the result of the
measurement. Cause:The arm was moved during the
measurement.
Err 3 Inflation of the cuff takes too long.The cuff is not correctly
seated or the hose connection is not sealed.
Err 5 The measured readings indicated an unacceptable difference
between systolic and diastolic pressures. Take another
reading taking care to follow directions carefully. Contact
you doctor if you continue to get unusual readings.
Err 6 Single data differ too much during the AAT Mode even after
4 cycles. No average result can be displayed.
Other possible malfunctions and their elimination
If problems occur when using the device, the following points should be checked and,
if necessary, the corresponding measures are to be taken:
Malfunction
The display remains empty when the
instrument is switched on although
the batteries are in place.
Remedy
1. Check whether the batteries are
installed with the correct polarity and
correct if necessary. 2. If the display is
unusual, remove the batteries and
then exchange them for new.
Malfunction
The pressure does not rise although
the pump is running
The device frequently fails to measure
the blood pressure valves, or the valves
measured are too low (too high)
Every measurement results in different
values, although the device functions
normally and normal values are displayed.
The blood pressure values measured
differ from those measured by the doctor.
Further information
The level of blood pressure is subject to fluctuations even in healthy people. It is
important to compare measurements taken under the same conditions and at the
same time of day. (Quiet conditions) The device has been subjected to strict clinical
tests by experienced Cardiac Specialists.This device is manufactured to meet
European standards under the supervision of the Technical Monitoring Association.
(RWTüV-Essen).If you have any questions regarding the use of this blood pressure
monitor, please ask your pharmacist or contact the TIMEX customer service representative, 1-800-422-0360.The TIMEX customer service team will be happy to help you.
Never attempt to repair the instrument yourself! Any unauthorized opening of the
instrument invalidates all warranty claims!
CARE AND MAINTENANCE
a) Do not expose the device to extreme temperatures, humidity, dust or direct
sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle the cuff carefully and avoid all
types of straining through twisting or buckling.
c) Handle the tube carefully.Avoid stress from pulling, pinching and sharp edges.
d) Clean the device with a soft, dry cloth. Do not use gasoline, thinners or similar
solvents. Carefully remove spots on the cuff with a damp cloth and soapsuds. The cuff
should not be washed in a washing machines or dishwasher!
e) Do not drop the instrument or treat it roughly in any way.Avoid strong vibrations.
f) Never open the device! This can negatively impact the calibration!
WARRANTY
Your TIMEX™ Professional Series Upper Arm Blood Pressure Monitor is a durable and
precise medical device manufactured under license by MEDport, LLC. MEDport, LLC.
takes pride in the quality and workmanship crafted into every product made.
Accordingly, MEDport,LLC. will repair or replace at our option any product that is
defective in material or workmanship for three years. This warranty does not cover
the batteries or damage caused by accident, negligence or improper use or care.
Please take a moment to mail in the enclosed warranty card now. It will expedite any
claims you may have against this warranty in the future.
Product should be returned to MEDport, LLC., postage prepaid with proof of purchase
and an explanation of the problem. If you follow the instructions for proper use and
care, the TIMEX™ Professional Series Upper Arm Blood Pressure Monitor should last
for years. However, if for any reason you are not satisfied, call our toll-free customer
service line: 1-800-422-0360. Our hours of operation are Monday – Friday 8:00 a.m.
– 8:30 p.m. EST.
The warranty is only valid upon presentation of the warranty card filled out by the
consumer and on file.
REFERENCE TO STANDARDS
Device standard: Device corresponds to the requirements of the
European standard for non-invasive blood
pressure monitor
EN1060-1 / 12:95
EN1060-3 / 09:97
Remedy
1. Check the connection of the cuff tube
and connect properly if necessary.
1. Fit the cuff correctly on the arm.
2. Before starting the measurement make
sure that the cuff is not fitted too tightly
and that there is no rolled-up sleeve
exerting pressure on the arm above the
measuring position. Take off articles of
clothing if necessary.
Please read the following information
and the points listed under “Common
sources of error” on page 12. Repeat
the measurement.
Record the daily development of the
values and consult your doctor about
them.
5
DIN 58130, NIBP – clinical investigation
US standard:
ANSI / AAMI SP10, NIBP – requirements
Electromagn. compatibility: Device fulfills the stipulations of the European
standard EN 60601-1-2
Clinical testing: Clinical performance testingwas carried out in
Germany according to the DIN 58130 / 1997
procedure N6 (sequential).
The stipulations of the EU-Guidelines 93/42/EWG for Medical Products Class IIa have
been fulfilled.
TECHNICAL SPECIFICATIONS
Weight: 1.11 lbs (503 g) with batteries
Size: 4.6 (W) x 6.9 (L) x 3.0 (H) inches
Storage temperature: -4˚F to 122˚C (–20˚C to +50°C)
Humidity: 15 to 90% relative humidity maximum
Operation temperature: 50˚F to 104˚F (10˚C to 40°C)
Display: LCD-Display (Liquid Crystal Display)
Measuring method: oscillometric
Pressure sensor: capacitive
Measuring range:
SYS/DIA: 30 to 280 mmHg
Pulse: 40 to 200 beats per minute
Cuff pressure display range: 0–299 mmHg
Memory: Automatically stores 2 x 30 measurements
Measuring resolution: 1 mmHg
Accuracy: Pressure within ± 3 mmHg
Pulse ± 5 % of the reading
Power source: DC 6V/600mA
a) Size AA, 1.5 V
b) AC adaptor 6 V DC 600 mA (included)
Accessories: cuff type M for arm circumference 8.6 in – 12.5
in (22–32 cm) or
cuff type L for arm circumference 12.5 in – 16.5
in (32–42 cm)
Reference to standards: EN 1060-1 /-3, NIBP - requirements
DIN 58130, NIBP - clinical investigations
ANSI / AAMI SP10, NIBP – requirements
Detailed user information about our thermometers and blood pressure monitors as
well as services can be found
at www.timexhealthcare.com.
Manufactured and Distributed under license by:
MEDport, LLC.
23 Acorn Street, Providence, RI 02903
1-800-422-0360
e-mail: info@medportllc.com
www.timexhealthcare.com
Made in China
TIMEX is a trademark of Timex Corporation.
Loading...