Timeular ZEIV1 Users manual

Let’s get started quickly:
timeular.com/get-started
Bugs, ideas and questions may arise and we’re
happy to hear them all in order to improve.
Just contact us at hello@timeular.com
Important Safeguards and Warnings
• Check for damage, do not repair or modify
• No water contact
• Very strong magnetic elds should always be avoided, since they can lead to malfunctions or damage
• Please do not write or draw on the device‘s surface with any pen, not even with the provided one.
Support
Should you have any troubles with your ZEI°, do not hesitate to contact our friendly and competent support team at support@timeular.com. Under any circumstances, do not try to repair ZEI° on your own. The attempt to repair your ZEI° could damage it and would violate the warranty of your product . Our support team is dedicated to ensuring that your time tracking experience is as smooth as possible.
Certication
Of course, your safety is our most important concern! ZEI° passed all relevant tests for Europe, the USA and Canada (EN71, BSEN 62115, BSEN 60825, REACH, ASTM F963, CPSIA, Wi­reless Regulatory RTTE Europe/FCC/IC, EMC for CE/FCC/IC, SAR, Bluetooth SIG, Radio Certicate USA/Canada)
FCC ID: 2AK5I-ZEIV1 IC ID: 22415-ZEIV1 Model Nr.: ZEIV1BWZZ
Made in Germany
5453435
Declaration of Conformity
Hereby, Timeular GmbH, declares that ZEI° is in compliance with the essential require­ments and other relevant provisions of the directives 1999/5/EC, 2009/84/EC and 2004/108/ EC. The declaration of conformity may be consulted at www.timeular.com/DoC.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following three conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment. This device has been designed and complies with the safety requirements for portable RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01. (3) changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS Compliance Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed and complies with the safety requirement for RF exposure in accordance with RSS-102, issue 5 for portable conditions.
Battery
This product contains a non-serviceable lithium ion battery. Follow safety instructions above carefully. If uid should leak from the battery, do not touch. If uid comes in contact with eyes, wash thoroughly with water and seek medical advice. Do not rub eyes. If you suspect that the battery is faulty through unexpected behaviour such as not holding charge, please turn off and do not attempt to charge or use the product. Contact the original product manufacturer immediately.
Recycling Disposal
This product contains a coin cell batterie. In the interest of protecting the environment, please do not dispose the product in the household waste at the end of its useful life. This product was produced after Jan 1 2006.
How to change the battery
1. Remove the button
3. Insert the new battery in the same position
2. Extract the battery
4. Insert the button
Thank you.
Loading...