![](/html/69/69d8/69d8ac7b85de30d6333e8abefcaa2aff0b80c3c351e200093f5026b0bb2b0760/bg1.png)
TIME MARK is a division of
MODEL 335
MODEL 365
Retriggerable
One-Shot Timer
⚫ Most Common Voltage & Timing Ranges
⚫ 5-Year Unconditional Warranty
DESCRIPTION
The Model 335 and 365 Retriggerable One-Shot Timers
are functionally interchangeable. The Model 335 is a
DPDT potentiometer (knob-adjust) timer while the Model
365 is a DPDT, high-accuracy digital input timer. Solid-
state timing circuits in each model drive an internal
electromechanical relay.
With power applied to the coil, when the initiate switch (dry
contact) is closed, the relay will energize for the time
period set by the user. At the end of the preset time
period, the relay will de-energize. If the initiate switch
opens and then closes multiple times while the relay is
energized (i.e. it is “retriggered”), the relay will then restart
the delay time. The relay will remain energized until the
retriggering stops and the delay time ends. When power
is removed, the relay will de-energize.
An “SG” version of this model is available using silver with
gold flash contacts.
Models 335 and 365 are UL Recognized and CSA
Certified.
SPECIFICATIONS
MODEL 335 (knob adj.) 365 (digital)
Voltage L = 10-28V AC/DC
Timing range 10SEC: 1 - 10 Sec.
60SEC: 1 - 60 Sec.
180SEC: 1 - 180 Sec.
300SEC: 1 - 300 Sec.
Accuracy ± 5% ± 2%
Repeatability ± 2% ± 0.1%
Recycle time 100ms
Operating temp -20°F to 140°F
Contact rating DPDT, 240VAC @ 10A resistive
Transient protection 775V, 80 Joules
Humidity tolerance 0 - 97% w/o condensation
Enclosure material NORYL Plastic
Mounting 11-pin socket (not included)**
Weight 5 oz.
Agency approval UL Recognized and CSA Certified
H = 40-260V AC/DC
0.1SEC: 0.1 - 102.3 Sec.
1SEC: 1 - 1023 Sec.
1MIN: 1 - 1023 Min.
1HR: 1 - 1023 Hr.
UL SPECIFICATIONS*
Models 335 and 365
Input
Voltage (VAC)
Power 3 Watts Max
Output
10-28V AC/DC OR 40-260V AC/DC
240V AC, 10A, Resistive
120V AC, 4A, General Use
240V AC, 2A, General Use
* Pilot Duty:
120V: Make 15A, Break 1.5A
240V: Make 7.5A, Break 0.75A
C300, Pilot Duty
Additional Options /C = Custom (Voltage and/or Timing)
Ordering Examples (Model-Voltage-Timing Range [/Options]):
365-H-0.1SEC = Model 365 with a 40-260V AC/DC voltage range
and a timing range of 0.1-102.3 seconds.
335-L-180SEC /SG = Model 335 with a 10-28V AC/DC voltage
range, a timing range of 1-180 seconds, and optional silver with gold
flash contacts.
Contact Time Mark to order a custom programmed unit
/SG = Silver with Gold Flash Contacts
** order 11-pin socket number 51X016
11440 Ea s t P i n e S t re e t
Tu l s a, O kl a h om a 7 4 1 16
© 2020 TIME MARK CORPORATION
02/2020
![](/html/69/69d8/69d8ac7b85de30d6333e8abefcaa2aff0b80c3c351e200093f5026b0bb2b0760/bg2.png)
MODEL 335 / 365
TIME MARK is a division of
Retriggerable One-Shot Timer
READ ALL INSTRUCTIONS BEFORE INSTALLING, OPERATING OR SERVICING THIS DEVICE.
KEEP THIS DATA SHEET FOR FUTURE REFERENCE.
GENERAL SAFETY
POTENTIALLY HAZARDOUS VOLTAGES ARE PRESENT AT THE TERMINALS OF THE MODEL 335 OR 365.
ALL ELECTRICAL POWER SHOULD BE REMOVED WHEN CONNECTING OR DISCONNECTING WIRING.
THIS DEVICE SHOULD BE INSTALLED AND SERVICED BY QUALIFIED PERSONNEL.
Installation Instructions
OPERATION
With power applied to the coil, the relay will energize for
the time period set by the user when the initiate switch
(dry contact) is closed. At the end of the preset time
period, the relay will de-energize. If the initiate switch
opens and then closes multiple times while the relay is
energized (i.e. it is “retriggered”), the relay will then restart
the delay time. The relay will remain energized until the
retriggering stops and the delay time ends. When power
is removed, the relay will de-energize.
An LED on top of the unit provides a quick visual indicator of
the relay’s status.
LED Indicator Unit Status
Green Energized
Red De-energized
Flashing (Green or Red) Relay is Timing
DIMENSIONS - Model 335
PIN DIAGRAM
The Models 335 and 365 One-Shot Timers require a standard
11-pin socket for mounting, and use a standard pin
configuration. Refer to the pin diagram below, or on the
timer, for terminal connections.
Shows No Power Applied
DIMENSIONS - Model 365
11440 Ea s t P i n e S t re e t
Tu l s a, O kl a h om a 7 4 1 16
Page 2 of 3 02/2020
© 2020 TIME MARK CORPORATION