Timeguard WFTWSUSB Installation Instructions

1. General Information

These instructions should be read carefully
in full before installation, and retained
for further reference and maintenance.

2. Safety

• Before installation or maintenance, ensure
the mains supply to the smart switch is switched
off and the circuit supply fuses are removed
or the circuit breaker turned off.

• It is recommended that a qualified electrician
is consulted or used for the installation
of this smart switch and installed
in accordance with the current IEE
wiring and Building Regulations.

• Check that the total load on the circuit

1 2 3 4 5

including when this smart switch is fitted
does not exceed the rating of the circuit
cable, fuse or circuit breaker.

• Operating Humidity: �80%RH

• WLAN-Standard:

• CE Compliant

• EC Directives: Conforms to latest

Dimensions (H x W x D): 90 x 146 x 30mm

IEEE 802.11 b/g/n

directives

4. System Requirements

• Smartphone/Tablet with at least iOS 8.0
or Android 5.0

• WLAN-enabled router: 2.4GHz
(Separate Band)

• Tuya Smart App

5. Connection Diagram

Neutral
Supply

Live

Supply

3. Technical Specifications

• 230V AC 50 Hz

• This unit is of class I construction

• Switch Rating: 13A Single
outlet Max

• Manual ON/OFF Control: Independent

control of both
outlets.

• USB Port Output: 5V 2.4A

• Standby Power: �1W

• Operating Temperature: -20°C to +60°C

N

L: Live supply (Brown or red)
N: Neutral Supply (Blue or Black)
: Earth (Green/Yellow)

L

Earth

Mounting Holes

6. Downloading App
and Registration

Note: the smartphone or tablet must
be connected to a 2.4GHz band on the
router. Paring on the 5GHz band will
result in paring either timing out or
being unsuccessful. Refer to your ISP
(Internet Service Provider) on separating
the bands if required.

• Ensure your phone or tablet is connected

to your local Wi-Fi network.

• Download the Tuya Smart App onto

your phone or tablet by searching
for ‘Tuya Smart’ on Google Play Store
or the App Store. You can also scan the
applicable QR code below;

• Install the App and open it
to the registration screen.
Click on the ‘Register’ button.

• Tap ‘Agree’ to accept the privacy policy.

• Choose your region by selecting the Country
Code. Enter your email address or phone
number and click ‘Get Verification Code’.

• Enter the Verification Code sent to the email
address or phone number that you provided.
Once you have successfully entered
the code, it will automatically move
you to the Password screen.

• Assign a Password (this must be between
6 to 20 characters including letters and digits)
and click ‘Done’.

• You are now registered and by default
will see the App home page.

7. Home Management

Note: Before adding any devices to your
account, structuring your household
(or the property) may be a consideration
if you plan on using Smart devices
in different rooms or locations.

• Select the ‘Me’ option from the home
page which will navigate you to your
personal settings. From here you can
setup a nickname for your profile i.e.
‘Mr Smith’s Account. After this select
the ‘Home Management’ option.

• Select the ‘Home Name’ option and
enter your last name or even ‘My Home’
if preferred. (This is required to allocate
devices to separate rooms later once paired).

• Next tick the rooms you wish to assign
to your account; this can be changed
at any time and custom room names
can also be added.

• To navigate back to the home screen,
press the ‘Back’ button, and then
click Home.

If you experience problems, do not

immediately return the unit to the store.

Telephone the Timeguard Customer Helpline:

HELPLINE

020 8450 0515

or email

[e-mail]

Qualified Customer Support Coordinators

will be online to assist in resolving

your query.

For a product brochure please contact:

Timeguard Limited.

Victory Park, 400 Edgware Road,

London NW2 6ND

Sales Office: 020 8452 1112

or email [e-mail]

www.timeguard.com

67.058.674 (Issue 2)

8. Pairing your Device(s)

Note: If you are using a VPN, make sure
this is disabled before continuing.

• To add a new device to your account,
click the ‘Add Device’ button (or click on
the + button in the top r

• Notice the different categories of products;
it is essential that the correct product
is selected for the pairing process to be
successful. For the Wi-Fi 2 Gang Smart Wall
Socket, choose the ‘Socket (Wi-Fi)’ option
from the list.

• With power to the Wi-Fi 2 Gang Smart
Wall Socket turned ON, press and hold
one of the On/Off buttons for a few
seconds until the LED starts to flash.

6 7 8

• When the LED is flashing press the

‘Confirm indicator rapidly blinking’

button. Enter the password for the network
and press the ‘Confirm’ button to pair
the product to your account (In most
cases the password should autofill).

• The App will pair the smart product to
the network. The time it takes for pairing
to complete, which will differ depending
on the network connection. Shortly into

TG50703 – November 2020

the pairing process, the flashing Status
LED will become stable (ON). This indicates
that the product has joined the network.

• To rename your product, select the pencil
icon. If this is not required, click on
the ‘Done’ button and you will guided
to the device controls menu.

ight hand corner).

• To navigate back to the home screen,
press the ‘Back’ button. The newly paired
Wi-Fi Smart Switch will now be listed.

Note: If the pairing process was not
successful, disconnect the mains supply
from the product and re-establish power
to the unit. Follow the bullet points from
'Section 8' to try again.

9. Smart Home Assistant

• To add your device to your Smart Home
Assistant services, such as Google Home
or Amazon Alexa, follow the on-board
instructions located on the TuyaSmart App.
To do this, select the ‘Me’ option
from the home menu, and then select
‘More Services’.

• On the more services screen, you will
see support or different applications for
automated Smart Home control. Follow
the instructions on the TuyaSmart App
to add the devices to your Smart Home
Assistant service.

Note: The Smart Home Assistant services
supported by the TuyaSmart App may
change as it is a 3rd party App Service.
Any services that may be removed
are the responsibility of TuyaSmart
developers and not Timeguard.

10. Support

Note: If you have any concerns that
the intended application of this product
does not meet your requirements,
please contact Timeguard directly prior
to installation.

11. Guarantee &
Company Details

3 Year Guarantee

In the unlikely event of this product becoming
faulty due to defective material or manufacture,
within 3 years of the date of purchase, please
return it to your supplier in the first year with
proof of purchase and it will be replaced free
of charge. For years 2 to 3 or any difficulty
in the first year, telephone our helpline.

Note: a proof of purchase is required in all cases.
For all eligible replacements (where agreed by
Timeguard) the customer is responsible for all
shipping/postage charges outside of the UK.
All shipping costs are to be paid in advance
before a replacement is sent.

Wi-Fi 2 Gang Smart

Wall Socket with

USB port

Model: WFT WSUSB

I n s ta llation & Ope r ating Ins truction s