Timeguard WFTRS3GUSB OPERATING INSTRUCTIONS

Wi-Fi 3 Way

Power Strip with

USB Ports

Model: WFTRS3GUSB

Installation & Operating Instructions

1. General Information

These instructions should be read carefully
in full before installation, and retained
for further reference and maintenance.

2. Safety

• Do not plug in any appliance that exceeds
the capacity of the Smart Plug.

• Always ensure the plug of any appliance
is fully inserted into the Smart Plug outlet.

• If cleaning of the Smart Plug is required,
remove from mains power and wipe Smart
Plug with a dry cloth.

• Do not immerse in water or any other liquid.

• For indoor use only.

3. Technical Specifications

1

• 230V AC 50 Hz

• Switch Rating: 13A

• Manual ON/OFF Control

• USB Port Output: 5V 2.4A / Port

• Operating Temperature: -30°c to +65°c

• Operating Humidity: ≤80%RH

• WLAN-Standard: 802.11 b/g/n

• Encryption: WEP/WPA/WPA2

• CE Approved

• EC Directives: Conforms to the
latest directives

Dimensions (H x W x D): 60 x 248 x 32mm

4. System Requirements

• Smartphone/Tablet with at least iOS 8.0

or Android 5.0

• WLAN-enabled router: 2.4GHz

(Separate Band)

• Tuya Smart App

5. Downloading App

and Registration

Note: The smartphone or tablet must
be connected to a 2.4GHz band on the
router. Paring on the 5GHz band will
result in paring either timing out
or being unsuccessful. Refer to your ISP
(Internet Service Provider) on separating
the bands if required.

2

• Ensure your phone or tablet is connected

to your local Wi-Fi network.

• Download the Tuya Smart App onto

your phone or tablet by searching
for ‘Tuya Smart’ on Google Play Store
or the App Store. You can also scan the
applicable QR code right;