These instructions should be read carefully
in full before installation, and retained for
further reference and maintenance.
2. Safety
• Before installation or maintenance, ensure the
1
mains supply to the smart switch is switched off
and the circuit breaker turned off.
• It is recommended that a qualified electrician is
consulted or used for the installation of this
smart LED lamp and installed in accordance with
the current IEE wiring and Building Regulations.
Page 3
• Check that the total load on the circuit including
when this smart LED lamp is fitted does not
exceed the rating of the circuit cable, fuse or
circuit breaker.
3. Technical Specifications
General
• Operating Voltage: 230V AC 50 Hz
2
• Energy efficiency: Class A+
• Colour Rendering Index: RA> 80
• Colour Profile: RGB, W, WW
• WLAN-Standard 802.11 b/g/n
• Encryption: WEP/WPA/WPA2
• CE Compliant
• EC Directives: Conforms to latest directives
Page 4
WFLB22, WFLE27
• Wattage 10W
• Lumen Output: 806lm
• Beam Angle: 220º
• Base Type: B22 & E27
• Dimensions (H x W x D) 60 x 60 x 100mm
WFLE14C, WFLE27C & WFLE14GB
• Wattage 5.5W
3
• Lumen Output: 400lm
• Beam Angle: 110º
• Base Type: E14 & E27
• Dimensions (H x W x D) 37 x 37 x 100mm CL
45 x 45 x 82mm RL
Page 5
WFLGU10
• Wattage 5.5W
• Lumen Output: 400lm
• Beam Angle: 110º
• Base Type: GU10
• Dimensions (H x W x D) 50 x 50 x 55mm
4. System Requirements
4
• Smartphone/Tablet with at least iOS 10.0 or
Android 5.0
• WLAN-enabled router: 2.4GHz (Separate Band)
• Tuya Smart App
Page 6
5. Installation
5.1 Ensure the mains supply is switched off and the
circuit supply fuses are removed or the circuit
breaker turned off.
5.2 Install the lamp into the appropriate base
for the selected product, making sure to
remove any former light fixture as required.
5
5.3 Once the lamp is held firmly in place by the
base plate, switch on the mains supply to the
lamp.
5.4 The lamp will switch on by default once it
receives mains power. The product will now be
ready for pairing.
Page 7
6. Downloading App
and Registration
Note: the smartphone or tablet must be
connected to a 2.4GHz band on the router.
Pairing on the 5GHz band will result in pairing
either timing out or being unsuccessful. Refer
to your ISP (Internet Service Provider) on
6
separating bands if required.
• Ensure your phone or tablet is connected to your
local Wi-Fi network.
• Download the Tuya Smart App onto your phone
or tablet by searching for ‘Tuya Smart’ on Google
Play Store or the App Store. You can also scan the
applicable QR code right;
Page 8
7
Page 9
• Install the App and open it to the registration
screen. Click on the ‘Register’ button.
• Tap ‘Agree’ to accept the privacy policy.
• Choose your region by selecting the Country
Code. Enter your email address or phone number
and click ‘Get Verification Code’.
• Enter the verification code sent to the email
8
address or phone number that you provided.
Once you have successfully entered the code, it
will automatically move you to the password
screen.
• Assign a Password (this must be between 6 to 20
characters including letters and digits) and click
‘Done’. The App home page will now appear.
Page 10
7. Pairing your Device(s)
Note: If you are using a VPN, make sure this is
disabled before continuing.
• To add a new device to your account, click the
‘Add Device’ button (or click on the + button in
the top right hand corner)
• Notice the different categories of products; it is
9
essential that the correct product is selected for
the pairing process to be successful. For the
Wi-Fi Smart Lamp, choose the
‘Light Source (Wi-Fi)’ option from the list.
• Enter the password for your Wi-Fi network and
press the ‘Next’ button.
Page 11
• Switch the lamp off and on three times within
1 second intervals.
• The lamp will begin flashing repeatedly, this
indicates that the product is in pairing mode.
• Confirm that the device is flashing on the App by
ticking ‘Confirm indicator rapidly blink’ on the
App, then press the ‘Next’ button.
10
• The App will pair the smart product to the
network. The time it takes for pairing to
complete will differ depending on the network
connection. Shortly into the pairing process, the
lamp will cease to flash. This indicates it is
connected to the network.
Page 12
• To rename your product, select the pencil icon.
If this is not required, click on the ‘Done’ button
and you will be guided to the device controls
menu.
• To navigate back to the home screen, press the
‘Back’ button. The newly paired Wi-Fi Smart
Lamp will now be listed on the device(s) menu.
11
Note: If the pairing process was not successful,
follow the bullet points from ‘Section 7’ to try
again.
8. Smart Home Assistant
• For Smart Home Assistant services such as Google
Home or Amazon Alexa, follow the on-board
instructions located on the TuyaSmart App.
Page 13
9. Guarantee & Company
Details
3 Year Guarantee
In the unlikely event of this product becoming faulty.
due to defective material or manufacture, within 3
years of the date of purchase, please return it to
your supplier with proof of purchase and it will be
12
replaced free of charge. For years 2 to 3 or any
difficulty in the first year, email our helpline.
Note: a proof of purchase document is required in
all cases. For eligible replacements (where agreed by
timeguard) the customer is responsible
for all shipping/postage charges outside
of the UK. All shipping costs are paid in
advance before a replacement is sent.
Page 14
If you experience problems, do not immediately
return the unit to the store.
Email the Timeguard Customer Helpline:
HELPLINE
helpline@timeguard.com
or call the helpdesk on 020 8450 0515
Qualified Customer Support Coordinators will be online
to assist in resolving your query.
For a product brouchure please contact:
Timeguard Limited.
Victory Park 400 Edgware Road,
London NW2 6ND
Sales Office: 02084521112
or email csc@timeguard.com
www.timeguard.com
67.058.680 (Issue 2)
T.W - December 2020
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.