Timeguard TS830 Setting Instructions Manual

1

2

4

2

3

2

2

2

1

2

0

1

9

1

8

1

7

1

6

1

5

1

4

1

3

1

2

1

1

1

0

9

8

7

6

5

4

3

2

1 2 3 4

Time

indicator

Switching
indicator &
self-cancelling
override
1=ON
0=OFF

Tough flame

retardant casing

24 hour

programme

ring

Protective
lobes

Time control segments 1 tappet = 15 minutes
Push towards programme ring = ON
Push away from programme ring = OFF

Front socket

face

TS830 24 Hour Segment Timeswitch Setting Instructions

Turn the segment dial clockwise until the correct time of day is
showing directly above the time indicator (the illustration shows

19.30 hours).
Decide what time you would like the time controller to switch

your appliance ON and OFF. Simply push the segment tappets
towards the time ring to set your ON times and away from the
time ring for your OFF times. (The illustration above shows the
time controller set to switch ON at 20.00 hours and OFF at 22.30
hours). These settings automatically operate the switching
indicator when the time controller is in its operating condition.
The switching indicator will show the switching condition
1=ON. 0= OFF. Minimum setting intervals = 15 minutes (one
tappet segment).Minimum time between settings = 15 minutes.

Check your programme by manually turning the segment dial
through a 24 hour cycle. Remember to re-set the dial back to the
correct time of day. Simply plug the time controller into a socket
and plug the appliance into the time controller. Switch on the
socket and the appliance. The time controller is now in its
operating condition.

Manual Override

You can switch your appliance ON and OFF at any time by
using the self-cancelling switching rider on the top left of the
unit. Simply turn anti-clockwise so the switching indicator on
the front of the unit is positioned to either the 1=ON or 0=OFF
position as illustrated. The override automatically cancels when
the next ON/OFF programme operates.

2

3

2

2

2

1

2

0

1

9

1

8

1

7

1

2

4

2

3

2

2

2

1

2

0

1

2

Switching ON before selected time

ON

OFF

Switching
rider

Switching OFF before selected time

5

6

OPERATING

INSTRUCTIONS

Points to note:

G

The segment dial can be turned even when the time
controller is operating.

G

In case of power failiure, re-adjust the time controller to the
correct time of day, turning the dial in a clockwise direction.

Important

This time controller is recommended for general domestic
appliances up to 13 amp resistive or 5 amp inductive rating.
Certain washing machines eg those with built-in delay timers
and some electronic machines require permanently connected
power and they cannot use this time controller.

Specifications

Operating Temp: 0°C to 40°C
Operating Voltage: 220-240V AC 50Hz
Switch Rating: 240V AC 13 amp resistive (3kW)

5 amp inductive
Filament 300W

Conforms to Directives: 73/23/EEC & 89/336/EEC

Not suitable for fluorescent, low energy or discharge lighting.

3 Year Guarantee

In the unlikely event of this product becoming faulty, due to defective material or
manufacture, within 3 years of the date of purchase, please return it to your supplier
with proof of purchase and it will be replaced free of charge.

Should you encounter any difficulty please
contact our helpline on 020 8450 0515.

24 HOUR

SEGMENT

TIMESWITCH

Cat No. TS830

HELPLINE

020-8450-0515

For a product brochure please contact:

Timeguard Ltd.

Victory Park, 400 Edgware Road,

London NW2 6ND Tel: [phone]

or email [e-mail]

Manufactured in the U.K. 67-058-39 (ISS 2)