Timeguard TR 612 User Manual

TERMINA
2-channel 7 day timers
Safety
Safety
Information
Information
According to version
preprogrammed
with the current time
norm time
The connection and installation of electrical appliances must be performed by a skilled electrician only.Any intervention into or modifications to the appliance shall lead to the lapse of all warranty rights. Comply with your national regulations and all relevant safety stipulations.
310 791 03
Display of special functions:
Hand ON/OFF
Permanent ON/OFF
Displayed only when summer/ winter time changeover is activated Summer time
r
Winter time
f
Current days of the week 1 = Monday,2 =Tuesday, ...
The decision Yes confirms the selection or programming
Decision No means continue
Overview per day of the programmed swit­ching times 5 = Friday
Channel statuses
C1 or C2 are displayed alternately ON / OFF
Service voltage OK:
Two flashing dots.
Power reserve mode:
Three flashing dots.
Selection
e.g.: Auto,
Prog, n, Man,
Abort input
Load
Load
D GB F NL I E P
TR 612 top
Fir
Fir
st contact
st contact
RESET (only in case of emergency): If you perform a RESET of the timer, the individual settings will be deleted.The programmes switching times
remain intact. Press the RES key with and a pointed object for approx. 1 second.
The decision Yes
, confirms the
selection or programming.
The decision
No
, means
continue.
According to version
According to version
Set or amend by pressing the
or keys.
For programming, viewing or deleting
First of all read the text display.
Menu selection
Select by pressing the Prog key. Confirm by pressing . By pressing the key select the desired menu. e.g. New,View or Delete. Confirm your selection by pressing . Set or change: by pressing or . Store by presssing .
To display the switching times:
In the menu View, press the key several times.
The timer is delivered in so-called sleep mode.
To increase the power reserve the switch clock changes to the sleep mode after approx. 15 minutes.
To activate without a service voltage
Briefly press the key.
Activate with mains voltage
If the timeswitch is already pre-programmed with the actual time, the weekday, and the changeover setting for Summer / Winter time, the actual time and status display appears after selection of the national language.
If the timer is not pre-programmed
First select your national language and then enter the actual date and time.
Activate the clock, select the national language
By pressing the or key select your national language. Store your selection by pressing the key.
Info
Info
Man
Man
Man
2
Type 1 BSTU
IEC/EN 60730-2-7
42 memory
locations
Degree of protection
II EN 60730
IP 20 EN 60529
2
2x
42
2
PrProgr
ogr
amming the switching time
amming the switching time
Switching times for lighting systems, machines,
ventilation systems, alarm systems etc.
Store
Example: Switching on the lighting of a sports hall on Mon., Tues.,Thurs., Fri. from 7.30h until 12h.
Programming example
Select PROG by pressing the key. Store your selection by pressing the key. Select NEW by pressing the or . Store your selection by pressing the key.
Select channel C1 or C2 by pressing or . Store your selection by pressing .
Select ON by pressing or . Store your selection by pressing . Set the hours and minutes by pressing the
or key.
Store selection by pressing .
To store this day of the week only
Select weekday by pressing or . Select STORE by pressing . Store by pressing .
To copy to other days of the week
Store COPY by pressing . Select weekday by pressing or . Store by pressing . To leave out a day of the week, skip by pressing the key. Finally select the STORE display by pressing . Store your selection by pressing .
Formation of day groups
If the same switching times are active on several days of the week, they occupy just one memory location, e.g. Monday – Friday 7.30 hrs ON.
42 memory locations are available.
Group formation
In answer to the text question Copy, de­cide by pressing the key that the day program should be copied to another day of the week.
When programming an ON and OFF switching time, e.g. Monday 9 AM,a switch-off at 9 AM always has priority.
Program review
Following programming the timer makes a program review back to midnight and then sets the correct switching status.
Example
Example
Override
Override
PPermanent ON or OFF
ermanent ON or OFF
Press the two keys for
approx. 1 s.
Manual preselection:
Press keys simultaneously. Channel C1 switches alternately ON or OFF. Symbol appears. Manual preselection is corrected again by the stored program.
Manual preselection:
Press keys simultaneously. Channel C2 switches alternately ON or OFF. Symbol appears. Manual preselection is corrected again by the stored program.
Via the automatic menu Auto only
Press both keys for
approx. 2 s.
Cancellation of manual preselection/ permanent switching: Briefly press the keys shown above.
Channel
C1
Channel
C2
Individual deletions
Permanent
ON OFF
Permanent
ON OFF
Setting/
Setting/
corr
corr
ecting the date and time
ecting the date and time
summer/winter time
summer/winter time
Automatic summer/winter time correction
According to version the timer is pre­programmed ex-works complete with the changeover. Should you switch off the automatic facility or wish to alter it, first of all read the text display. Select by pressing or .
Store by pressing .
Free Prog to select sum/win change­over other than EUR-GB-USA. Select sum/win, and after with sum/win. Store with . Select rule FREE – with buttons
or . Input month and weeks for sum/win. Store with . E.g. Month = March Week 4 = fourth week Week 5 = last week in month Note: In sum/win free Prog the time change is set automatically at sunday 2 AM. Time change is not available.
Read the text display first of all.
Select by pressing the key
or key.
Store by pressing the key.
Man
TIMEGUARD LTD., Victory Park, 400 Edgware Road,
London NW2 6ND Tel. 0208/4508944, Fax 0208/4525143
PETER WARBURTON PTY. LIMITED, 64 Brittania Road, Castle Hill NSW 2154, Australia, Tel.: (02) 9899 2908, Fax: (02) 9899 4486
PIN code
PIN code
The device can be locked against unauthorized use with a 4 digit code number.
Select the Manual menu using oder . Confirm with the button.
Selection WITH PIN
Select WITH PIN using oder . Confirm with the button. Make note of any desired 4-digits number. Select the first digit of your 4 digit code using
.
Confirm the entered digit with . Select further digits as described using oder . Confirm each selected digit with the button.
The device is locked 90 sec. after the last keystro­ke and can only be operated after the correct PIN code is entered.
Selection WITHOUT PIN
Select WITHOUT PIN using oder . Confirm with the button.
PIN
PIN
If a PIN code has been activated, the timer can no longer be activated without a valid PIN code after a RESET.
The device must be sent in!
Loading...