Timeguard MLBPRO500C User Manual
500W “C” Class Halogen
Floodlight with 240º
PIR Control
Model: MLBPRO500C (Black)
Model: MLWPRO500C (White)
Installation & Operating Instructions
1 Introduction
Thank you for choosing the MLB/WPRO500C. It is our new generation of sensor
light technology, providing benefi ts in better performance and a quick and easy
installation compared with other sensor lights on the market. It is integrated with
years of experience and broad expertise in manufacturing sensor detectors and
sensor lights for professional use.
The MLB/WPRO500C has the following outstanding features and superior functions
that will meet most of your needs.
• Fully adjustable fl oodlight left or right 45º, up 50º and down 35º.
• Floodlight fi xed by hand, no tools needed.
• Aluminium alloy light weight body: Heavy duty and durable.
• Polycarbonate material sensor, giving good weatherproof performance.
• Additional three 500W halogen fl oodlights can be connected.
• High quality professional bulb sockets for no more contact problems.
1
• Plug-in terminal block for quick and easy wire free connection and convenient
replacement of the light bulb.
• Adjustable lens giving a 240º outer zone from 3 to 16m and a 360º inner zone
giving comprehensive coverage within a 3m radius circle.
• Multi-segmented lens shields included for blocking zones within a detection area.
Each segment blocking a detection angle of 10º.
• Rotatable sensor head from left 60º to right 60º to reposition detection zone.
• Environmental protection: IP44.
• Three user friendly adjustments for LUX, TIME and METER (range restriction).
• Wall and corner mounting brackets supplied.
• Energy saving integral photocell allows automatic operation at night only.
2 Contents in Package
Article Quantity Note
MLB/WPRO500C 1 See Fig. 1a
Instructions 1
Accessories See Fig. 1b
Motion Sensor Light
Glass Frame
Light Body
Outer Ring
Backplate
Fig. 1a
Sensor Head
Accessories
Corner Mounting
Adapter
Fig. 1b
Lens Shield
Halogen
Bulb
Large
Pan Head
Screw
Grommet
Blind
Small
c/sk Head
Screw
Small
Pan Head
Screw
2
3 PIR Coverage
The MLB/WPRO500C should be installed within the height range 2.0m to 2.5m.
(See Fig. 2).
The unit has an adjustable lens with two detection zones.
• The outer zone covers an angle of 240º to a distance of approx. 3m to 16m at an
installation height of 2.3m. (See Fig. 3).
• The inner zone covers an angle of 360º which allows detection immediately
behind the MLB/WPRO500C. (See Fig.4).
• Fig. 4 also shows the variation of sensitivity with angle of approach for a person
moving within the detection area.
4 Installation
Installation shouild only be carried out by a competent person.
Switch Off the Mains Power Supply Before Installation
The MLB/WPRO500C can be either wall mounted or corner mounted with an
adapter included with the product. (See Fig. 5).
Wall Mount
Fig. 5a
Corner Mount
Fig. 5b
3
Side View
2.3m
Fig. 2
Fig. 4
34 730
Most
Sensitivity
Least
Sensitivity
16m
Top View
Fig. 3
240°
3m
4m 4m
7m 7m
16m 16m
Corner Mounting Adapter
Fig. 5
(See section B)
A Installation Procedure
a. Read the instruction manual before installing the MLB/WPRO500C.
b. Make sure the mains power supply has been disconnected.
c. Decide the best location to install the unit bearing in mind the most sensitive
direction of movement shown in Fig. 4.
Then ensure that the top of the fl oodlight is no closer than 200mm to the surface
above it and it is no closer than 500mm to the surface at the side of it.
(See Fig. 6).
Also ensure that any surface directly illuminated by the fl oodlight is at least 1m
away from the front glass. (See Fig. 8).
Do not mount the unit base on a horizontal surface such as a soffi t,
(See Fig. 7) or on an infl ammable surface such as wood or plastic.
Min.
200mm
35°
Fig. 6 Fig. 7
45°
500mm
Min.
4
Loading...