Page 1
LED UNCONTROLLED
FLOODLIGHT
Model: LEDX10FLB
Model: LEDX10FLWH
Model: LEDX20FLB
Model: LEDX20FLWH
Model: LEDX30FLB
Model: LEDX30FLWH
I n s t a llat ion & O p e rating Instruc t ions
Page 2
1. Designated Use
• LEDX10FL, LEDX20FL and LEDX30FL are an outdoor LED light.
• Mainly for wall installation.
• Simple plug in wall plate for easy & safe connection.
• Suitable for a wide range of locations: corridors, gardens, staircases,
entrances, garages, outdoor parking areas etc.
WARNING
2. Basic Safety Instruction
Danger of death through electric shock or fi re!
• Must only be installed by qualifi ed electricians.
• Avoid the metal parts of the device due to potentially high temperature.
1 2 3 4
• Conforms to current EC Directives.
• Designed for use in normal environments
• Intended for outdoor installation.
• Energy saving.
• Long LED lamp life time.
Index :
Page 2 Contents and Tools required
Page 3 Connection and Installation procedure
Page 4 Installation procedure
Page 5 Lamp adjust and Warning
Page 6 Technical specifications
Page 3
3. Contents:
What’s in the box?
X 1
INSTRUCTIONS
MANUAL
X 1
Screw:
M4x32mm
X 1
X 1
X 2 X 2
X 1 X 2
Screw peg:
6x30mm
Screw: M3x12mm
Product’s weight
LEDX10FL: 0.42kg, LEDX20FL: 0.60kg, LEDX30FL: 0.85kg
4. Tools required:
Tools / Equipment need for installation.
Flat blade screw driver Suitable for screw head Drill bit with diameter 6mm
X 1
X 1
X 1
Page 4
5. Connection:
Connect the cable to the terminal block as follows
(see connection diagram):
Ensure the connections are secure. Refit wall plate ensuring it clicks
firmly into place.
Max wire
1 x 2.5mm per way
Mains
Supply
LIVE
NEUTRAL
EARTH
BROWN
BLUE
GREEN / YELLOW
Isolation
Switch off the electricity at the fuse box by removing the relevant fuse or
switching off the circuit breaker before proceeding with the installation.
*** IMPORTANT ***
6. Installation Procedure:
1
Switch off the power.
230V
3
Drill and push the screw
peg into the hole.
φ
6mm
2
Marking the screw hole.
4
Fix the U bracket to the wall.
Mounting Screws: (M4x32mm) X 2
Switch
E
N
L
Page 5
5
First, feed the cable through the
rubber gasket of the junction box.
7
Tighten the screws.
Connect the individual wires to the appropriate terminal then tighten
9
6
Attach the strain relief to the
device and screw in.
Screws: (M4x12mm) X 2
EARTH
Loosen the screws.
8
the screws.
CONNECTION
( See connection diagram )
Connect the mains supply
cable to the on the terminal
block backplate as follows.
LIVE
NEUTRAL
EARTH
BROWN
BLUE
GREEN / YELLOW
10
Attach the
wallplate
to the device.
Push
“Click”
11
Attach the device to the U
bracket then tighten the
screws on both sides.
12
Connect device
to mains.
Page 6
Lamp Adjustment
The lamp can be tilted upward 45º and
tilted downward 60º.
WARNING
This product will get warm when
in normal use. Can be installed
on surfaces of normal flammability
e.g. wood, plasterboard,
brickwork and other masonry.
Do not install on flammable
surfaces such as plastics.
Tilt upward 45º
60
50
40
+40
30
20
-20
10
Tilt downward 60º
5 6
LEDX10FL Technical specifications:
Energy Efficiency Class A+
Energy Usage 9kWh/1000h: 9W typ
Power Supply 230V AC
Lumen Output initial Black: 685 Im typ, White: 750 lm typ
Lamp Beam Angle 110 x 100 degrees
The lamps are not replaceable in this product
Environmental Protection IP55 (suitable for indoor and outdoor use)
EC Directives Conforms to current EC Directives
~ 50Hz
LEDX20FL Technical specifications:
Energy Efficiency Class A+
Energy Usage 16kWh/1000h:15.6W typ
~ 50Hz
Power Supply 230V AC
Lumen Output initial Black: 1260 Im typ, White: 1325 Im typ
Lamp Beam Angle 110 x 100 degrees
The lamps are not replaceable in this product
Environmental Protection IP55 (suitable for indoor and outdoor use)
EC Directives Conforms to current EC Directives
Page 7
LEDX30FL Technical specifications:
Energy Efficiency Class A+
Energy Usage Lamp On 27kWh/1000h: 27W typ
Power Supply 230V AC
Lumen Output initial Black: 2115 Im typ, White: 2310 lm typ
Lamp Beam Angle 110 x 100 degrees
The lamps are not replaceable in this product
Environmental Protection IP55 (suitable for indoor and outdoor use)
EC Directives Conforms to current EC Directives
~ 50Hz
LEDX10FL / LEDX20FL / LEDX30FL Technical specifications:
Power Factor > 0.95
Colour Temperature 5000 - 5600k
Colour Rendering > 70
If you experience problems refer to Troubleshooting Guide.
If problems still exist, do not immediately return the unit to store.
Telephone the Timeguard Customer Helpline
020 8450 0515
Qualified Customer Support Co-ordinators will be on-line to assist
3 Year Guarantee
In the unlikely event of this product becoming faulty due
to defective material or manufacture within 3 years of the
date of purchase, please return it to your supplier in the
first year with proof of purchase and it will be replaced free
of charge. For years 2 and 3 or any difficulty in the first year telephone
the helpline on 020 8450 0515.
in resolving your query.
Note:
A proof of purchase is required in all cases. For all eligible replacements
(where agreed by Timeguard) the customer is responsible for all
shipping/postage charges outside of the UK. All shipping costs are to be
paid in advance before a replacement is sent.
Page 8
HELPLINE
020 8450 0515
or email helpline@timeguard.com
For a product brochure please contact:
Timeguard Limited.
Victory Park, 400 Edgware Road,
London NW2 6ND
Sales Offi ce: 020 8452 1112
or email csc@ timeguard.com
67.058.501 (Iss.2)
Loading...