LED Uncontrolled Floodlight
Model: LEDX10FLWH (White)
Model: LEDX10FLB (Black)
Model: LEDX20FLWH (White)
Model: LEDX20FLB (Black)
Installation & Operating Instructions
Model: LEDX30FLWH (White)
Model: LEDX30FLB (Black)
1
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the luminaire
is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this luminaire and install in accordance with the
current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this luminaire is fitted
does not exceed the rating of the circuit cable, fuse or circuit breaker.
3. Technical Specifications
• 230V AC, 50Hz
• These luminaires are of class I construction and must be earthed
• Colour Temperature: 5000K – 5600K
• Energy Efficiency: class A
• IP55 Rated suitable for restricted external applications
• CE Approved
LEDX10FLB-WH
• 10W LED Non replaceable lamp
• Energy Usage: 10Kwh/1000h
• Lumen Output: Black: 685 lm, White: 750lm
LEDX20FLB-WH
• 20W LED Non replaceable lamp
• Energy Usage: 20Kwh/1000h
• Lumen Output: Black: 1260lm, White: 1325lm
LEDX30FLB-WH
• 30W LED Non replaceable lamp
• Energy Usage: 30Kwh/1000h
• Lumen Output: Black: 2115lm, White: 2310lm
2
4. Installation
• Mark the position of the mounting holes
on the wall using the U bracket supplied
as a template.
• Drill the holes for the wall plugs ensuring
not to infringe with any gas/water pipes
or electrical cables that may be hidden
below the surface.
• Fix the U bracket to the wall using
the correct screws for the wall
plugs installed.
• Secure the supply cable into the junction box through the hole(s) provided
ensuring that a cable gland, grommet or sealing compound is used
to maintain the IP rating of the luminaire.
Loading...