1.6W Horizontal
LED Step Light
Model: LEDSL1DG – Dark Grey
Model: LEDSL1WH – White
Installation & Operating Instructions
1
1. General Information
These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the luminaire
is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.
• It is recommended that a qualified electrician is consulted or used for
the installation of this luminaire and install in accordance with the
current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this luminaire is fitted
does not exceed the rating of the circuit cable, fuse or circuit breaker.
3. Technical Specifications
• 230V AC 50 Hz
• This luminaire is of class II construction and must not be earthed
• 1.6W LED Non replaceable lamp
• Energy Efficiency: Class A
• Energy Usage: 1.6kWh/1000h
• Lumen Output: 67lm
• Colour Temperature: 4000K
• Operating Temperature: -20°C to +55°C
• IP65 Rated suitable for restricted external applications
• CE Approved
• Product Dimensions: H80mm, W230mm, D27mm
2
4. Installation
• Ensure the mains supply is switched off and the circuit supply fuses
are removed or the circuit breaker turned off.
• An isolating switch should be installed to the switch the power ON & OFF
to the luminaire. This allows the unit to be easily switched OFF for
maintenance purposes.
• Remove the bezel carefully using a flat head screw driver, to reveal
the mounting holes and cover fixing screws.
• Undo the 6 cover fixing screws and remove
the clear plastic cover.
Loading...