Timeguard LEDPRO70B, LEDPRO100WH, LEDPRO70WH, LEDPRO100B Installation & Operating Instructions Manual

Installation & Operating Instructions

Professional

Rewireable Floodlight

LEDPRO70B

Black

LEDPRO70WH

White

LEDPRO100B

Black

LEDPRO100WH

White

1

1. General Information

These instructions should be read carefully in full before installation and retained
for further reference and maintenance.

2. Safety

• Before installation or maintenance, ensure the mains supply to the floodlight
is switched off and the circuit supply fuses are removed or the circuit breaker
turned off.

• It is recommended that a qualified electrician is consulted or employed
for the installation of this floodlight and that it is installed in accordance
with current IEE wiring and Building Regulations.

• Check that the total load on the circuit including when this floodlight is fitted
does not exceed the rating of the circuit cable, fuse or circuit breaker.

• DO NOT place any object closer than 1 metre in front of the floodlight.

3. Technical Specifications

• 230V AC 50Hz

• This PIR sensor is of class I construction and must be earthed

• Colour Temperature: 5000K

• Energy Efficiency: Class A+

• Operating Temperature: -20°C to +40°C

• IP65 Rated, suitable for restricted external applications

• Dimensions (H x W x D): 235 x 305 x 66mm

• CE Compliant

LEDPRO70B & LEDPRO70WH

• 70W LED Non replaceable lamp

• Energy Usage: 70kWh/1000h

• Lumen Output: Black = 7000lm, White = 7100lm

LEDPRO100B & LEDPRO100WH

• 100W LED Non replaceable lamp

• Energy Usage: 100kWh/1000h

• Lumen Output: Black = 10,000lm, White = 10,200lm

2

4. Installation

• Ensure the mains supply is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.

• An isolating switch should be installed to enable the power to be switched
ON and OFF to the floodlight. This allows the unit to be easily switched OFF
for maintenance purposes.

• Mark the position of the mounting holes on the wall using the U bracket
supplied as a template.

• Drill the holes for the wall plugs ensuring not to infringe on any gas/water
pipes or electrical cables that may be hidden below the surface.