Pan & Tilt Bracket
Model: LEDCSTSSBRB – Black
Model: LEDCSTSSBRWH – White
Installation & Operating Instructions
1
1. General Information
These instructions cover the installation of the Pan & Tilt bracket for the LEDCST
coastal grade floodlight range as specified below. These instructions should
be read carefully in full before installation, and retained for further reference
and maintenance.
2. Safety
• Be careful with the tools used during installation to prevent accidents
or damage.
• If the product is installed without following the designated method,
the product may be unstable and cause a safety issue.
• It is recommended that a qualified electrician is consulted or used for
the installation of these products and install in accordance with the current
IEE wiring and Building Regulations.
3. Technical Specifications
• For use with models;
LEDCST10B-WH 10W LED Coastal Grade Floodlights
LEDCST20B-WH 20W LED Coastal Grade Floodlights
LEDCST30B-WH 30W LED Coastal Grade Floodlights
LEDCST10PIRB-WH 10W LED Coastal Grade PIR Floodlight
LEDCST20PIRB-WH 20W LED Coastal Grade PIR Floodlight
LEDCST30PIRB-WH 30W LED Coastal Grade PIR Floodlight
• CE Compliant
4. Installation
4.1 Ensure that the mains supply to the circuit breaker is switched off
and the circuit supply fuses are removed or the circuit breaker turned OFF.
Image 1
2
4.2 Mark the position of the mounting holes on the wall using the bracket
as a template.
Image 2
Note: the bracket must be fitted
this way up i.e. with the hand
screw hole at the top
Loading...