Timeguard LED400FLB User Manual
HELPLINE
020 8450 0515
or email helpline@timeguard.com
Lamp adjustment
The lamp can be tilted down 55 degree and pan outward 50 degree with the
spacer or 40 degrees without.
Side View
Spacer
55°
Top View
Spacer
WARNING
High Temperature
The temperature of the lamp is very high during operation. You will get hurt
if you touch the heat sink.
40
30
20
10
40
+40
30
20
-20
10
I n s t a llat ion & O p e rating Instruc t ions
32W LED
FLOODLIGHT
Model: LED400FLW - White
Model: LED400FLB - Black
For a product brochure please contact:
Timeguard Limited.
Victory Park, 400 Edgware Road,
London NW2 6ND
Sales Offi ce: 020 8452 1112
or email csc@ timeguard.com
67.058.487
LED400FLW.1_Instructs_147x105.indd 5,7
50°
5 6
The lamp can be tilted down 55 degree pan outward 90 degree to left
90°
The lamp can be tilted down 55 degree and
pan outward 90 degree to right.
90°
90
50°
55°
55°
TECHNICAL SPECIFICATIONS
Supply 220 - 240V 32W
Output 2000 Lumens
Weatherproof IP55
3 Year Guarantee
In the unlikely event of this product becoming faulty due
to defective material or manufacture within 3 years of the
date of purchase, please return it to your supplier in the
first year with proof of purchase and it will be replaced free
of charge. For years 2 and 3 or any difficulty in the first year telephone
the helpline on 020 8450 0515.
31/05/2012 1.57pm
Prepared by: Sally
1. Designated Use
• LED400FL is an outdoor LED light.
• Suitable for installation on walls.
• Simple plug in wall plate for easy & safe connection.
• Suitable for a wide range of locations: corridors, gardens, staircases,
entrances, garages, outdoor parking areas etc.
3. Contents:
What’s in the box?
INSTRUCTION
MANUAL
X 1
X 2
5. Product Dimensions:
31.00
179.00
179.00
WARNING
131.00
2. Basic Safety Instruction
Danger of death through electric shock or fi re!
• Must only be installed by qualifi ed electricians.
• Avoid the metal parts of the device due to potentially high temperature.
• The device conforms to EN60598 for designated installation; IP55 in
1 2 3 4
accordance with EN 60529 and IEC62471 Photo biological safety of
lamps and lamp system.
• Designed for use in normal environments.
• Intended for outdoor installation.
• Energy saving.
• Long LED bulb life.
Index :
Page 2 Contents & Tools required.
Page 3 Product dimensions.
Page 4 Installation procedure.
Page 5 Lamp adjustment
Page 6 High temperature in lamp.
4. Tools required:
Tools / Equipment need for installation.
X 1
X 1 X 1
X 1
X 2
X 1
270.00
108.00
179.00
Spacer dimension:
15.00
270.00
91.00
161.00
67.00
* The Spacer is an optional fitting
which gives maximum Pan angle.
104.00
108.00
6. Installation Procedure:
Unscrew the
wall plate.
1
Fix the spacer with the wall plate to the wall or the wall plate alone.
5
CAUTION:
φ
5mm
60mm
Feed the wires through rubber gasket of the wall plate with spacer and attach
to corresponding terminal.
7
Attach the device
to the wall plate.
8
Push and open
the wall plate.
2
Push
6
CONNECTION:
( See connection diagram )
Connect the mains supply cable to the
terminal block on the backplate as follows.
Screw the wall plate
to the unit.
9 10
Fix the spacer
to the wall plate
- if required.
3
Use the spacer if necessary
MOUNTING SCREW x 2
LIVE
NEUTRAL
EARTH
GREEN / YELLOW
Unit goes into warm-up
period for 40 sec.
Switch off
the power.
4
240V
BROWN
BLUE
LED400FLW.1_Instructs_147x105.indd 1-4 31/05/2012 11.16am
Prepared by Sally
Loading...