Timeguard IS4N-63, IS4N-32, IS3N-20, IS4N-40, IS4N-20 Installation Instructions

Download

Page 1

IP65 Isolator Switches

Installation & Operating Instructions

Model: IS3N-20 – 3 Pole, 20A Model: IS4N-20 – 4 Pole, 20A

Model: IS3N-32 – 3 Pole, 32A Model: IS4N-32 – 4 Pole, 32A

Model: IS4N-40 – 4 Pole, 40A Model: IS4N-63 – 4 Pole, 63A

Model: IS4N-100 – 4 Pole, 100A

Page 2

1. D imensions

3. Cleaning

1. D imensions

4. Specifications

3. Cleaning

Care should be taken when cleaning this product.

• Inside the lid should only be wiped with a clean dry cloth.

• The outside can be cleaned with mild detergent.

• Solvent based cleaners should not be used.

E B

ØD1

IS4N-40

Manual Motor Controller IEC947-3, EN63947-3, VDE0660-107

MOTOR 120V 240V 480V 600V

220V

380V

690V

440V 3ph HP 3 7.5 15 15 Iu=Ith=AC21A 40A 1ph HP 1.5 3 7.5 7.5 AC-23A 3ph 7.5kW 15kW 18.5kW 40A 600VAC AC-3 1ph 7.5kW 11kW 11kW

IS4N-63

Manual Motor Controller IEC947-3, EN63947-3, VDE0660-107

MOTOR 120V 240V 480V 600V

220V

380V

690V

440V 3ph HP 5 10 20 20 Iu=Ith=AC21A 63A 1ph HP 2 5 10 10 AC-23A 3ph 11kW 22kW 22kW 63A 600VAC AC-3 1ph 11kW 22kW 15kW

IS4N-100

Manual Motor Controller IEC947-3, EN63947-3, VDE0660-107

MOTOR 120V 240V 480V 600V

220V

380V

690V

440V 3ph HP 10 25 50 50 Iu=Ith=AC21A 100A 1ph HP 5 15 30 30 AC-23A 3ph 22kW 37kW 30kW 100A 600VAC AC-3A 1ph 18.5kW 30kW 22kW

IS3N-20 and IS4N-20

Manual Motor Controller IEC947, EN60947-3, VDE0660

MOTOR 120V 240V 480V 600V

220V 380V

440V 690V 3ph HP 1.5 3 5 5 Iu=Ith=AC21A 20A 1ph HP 0.5 1.5 3 3 AC-23A 3ph 5.5kW 7.5kW 20A 600VAC AC-3 1ph 4.0kW 5.5kW

IS3N-32 and IS4N-32

Manual Motor Controller IEC947, EN60947-3, VDE0660

MOTOR 120V 240V 480V 600V

220V 380V

440V 690V 3ph HP 1.5 3 5 5 Iu=Ith=AC21A 32A 1ph HP 0.5 1.5 3 3 AC-23A 3ph 7.5kW 11kW 32A 600VAC AC-3 1ph 5.5kW 7.5kW

A B C D1 E F H

For assistance with the product please contact:-

Helpline

020-8450-0515

or email helpline@timeguard.com

For a product brochure please contact:

Timeguard Ltd.

020-8452-1112

or email csc@timeguard.com

Timeguard Limited

Victory Park, 400 Edgware Road, London NW2 6ND

A Group Company

67.058.471 (iss. 1)

3 Year Guarantee

In the unlikely event of the product becoming faulty due to defective material or manufacture within 3 years of the date of purchase, please return it to your supplier in the first year with proof of purchase and it will be replaced free of charge.

For the second and third years or any difficulty in the first year telephone the helpline on 020 8450 0515

50Hz

ØE

3. Cleaning

Care should be taken when cleaning this product.

• Inside the lid should only be wiped with a clean dry cloth.

• The outside can be cleaned with mild detergent.

• Solvent based cleaners should not be used.

4. Specifications

IS3N-20 IS4N-20 100 82 65.5 97.5 2x M20 60 60 90

IS3N-32 IS4N-32 141 100 67.5 99.5 2x M20/25 100 75 126

IS4N-40 IS4N-63 175 121 90.5 122.5 2x M20/25 135 96 161

IS4N-100 240 160 96 138

A B C D ØE F G H

Please note that all instructions are to be left with the customer after installation

The Weathersafe Isolator range is manufactured from tough, durable thermoplastic, and is intended for use in an outdoor environment, or one in which the protection provided by the Weathersafe Extreme range is required. The protection level is IP65.

2. Installation Instructions

• These products should be installed by a competent person (e.g. qualified electrician) in accordance with these instructions and in compliance with the appropriate clauses of the current edition of the IEE wiring and building regulations.

• The Weathersafe Isolator range is designed to be mounted on a vertical flat surface.

• The rear box shall be mounted on the wall using fixings and wall plugs if necessary. The fixing dimensions are marked on the back of the rear box.

• The front moulding can only be removed when the switch is on the OFF position.

• The terminals should be tightened to a torque of 1.8Nm.

Do not exceed the maximum cables sizes:

• 20A 2.5mm

• 32A 6mm

• 40A and 63A 16mm2

• 100A 25mm

• A cable gland of IP65 or higher should be used in order to maintain the IP rating.

• The relevant cable entry knockout should be carefully removed by scoring the groove around the required knockout with a sharp knife and then tapping it out with a small hammer onto a screwdriver in the groove.

• When re-assembling the enclosure ensure that the gasket is fully in place in order to retain the IP65 rating.

• Tighten the screws supplied to refix the front cover in place. Do not overtighten. Use of an electric screwdriver is not recommended.

• Advice should be sought before installing this product in an

environment where it is likely to be subjected to chemicals, oils or solvents.

2x M25/32

1x M20

193 142 NA

MOTOR 120V 240V 415V 220V 415V

3ph HP 3 7.5 15 lu = lth = AC21A 40A 1ph HP 1.5 3 7.5 AC-23A 3ph 7.5kW 15kW

MOTOR 120V 240V 415V 220V 415V

3ph HP 5 10 20 lu = lth = AC21A 63A 1ph HP 2 5 10 AC-23A 3ph 11kW 22kW

MOTOR 120V 240V 415V 220V 415V

3ph HP 10 25 50 lu = lth = AC21A 100A 1ph HP 5 15 30 AC-23A 3ph 22kW 37kW

3 Year Guarantee

In the unlikely event of this product becoming faulty due to defective material or manufacture, within 3 years of the date of purchase, please return it to your supplier in the first year with proof of purchase and it will be replaced free of charge. For years 2 to 3 or any difficulty in the first year, telephone our helpline on 020 8450 0515. Note: a proof of purchase is required in all cases. For all eligible replacements (where agreed by Timeguard) the customer is responsible for all shipping/ postage charges outside of the UK. All shipping costs are to be paid in advance before a replacement is sent.