Infra-Red
DALI Remote
Control
Model: IRRDAL I
Installation & Operating Instructions
1. General Information
These instructions should be read
carefully and retained for further reference
and maintenance.
The IRRDALI infra-red DALI remote control
is designed to be used with the Timeguard
IR DALI Presence detector models PDSMDALI,
PDSMCDALI, PDFMDALI and PDFMCDALI.
2. Safety
• Do not drop, knock or shake the product
as rough handling may damage the
electronics and void the warranty.
• Do not use harsh chemicals, cleaning
solvents or strong detergents to clean.
1
Wipe with a damp cloth on the housing
to remove dirt or dust.
• Do not use batteries other than those
specified. Dispose of them properly,
observing environmental protection rules.
3. Technical Specifications
• Rated voltage : 3V DC
• Replaceable battery: CR2032 Battery
• Protection class: Class III
• Transmission range: >5m
• Transmission angle: 30°
• Time ON adjustment: 1m to 30m
• LUX light level adjustment:
10 Lux to 1000 Lux
• Constant LUX level adjustment:
Constant light value of
300 Lux to 1000 Lux
• Standby Time adjustment:
ON, OFF, 1m to 30m
• Permanent override function:
2
ON or OFF for 10 hors
• IP Rating: IP40
• LED Indicator: Yes
• Working temperature: 0ºC to +40ºC
• RoHS compliant
• CE compliant
• IEC/EN61000-6-1
IEC/EN61000-6-3
• Dimensions (W x H x D): 110 x 55 x 6mm
4. Setting with Remote
Control
3
4.1 Lock/Unlock
• Press this button to LOCK or UNLOCK
the sensor IR receiver.
• The sensor LED indicator will remain ON
for 2 seconds for LOCK status, and flash
for 2 seconds for UNLOCK status.
• Please UNLOCK the sensor IR receiver
before setting with the remote control.
Loading...