Timeguard FSTWIFITU User guide

WiFi Controlled Fused

Spur Time Switch

Model: FSTWIFITU

TuyaSmart Edition

FSTWIFITU

I n s tallation & Operating Instructions

1. General Information

These instructions should be read carefully and retained for further
reference and maintenance.

Timeguard reserve the right to alter these instructions at any

Note:

time. Up to date instructions will always be available to download
at www.timeguard.com.

2. Safety

• Before installation or maintenance, ensure the mains supply to the
time switch is switched off and the circuit supply fuses are removed
or the circuit breaker turned off.

• It is recommended that a qualified electrician is consulted or used
for the installation of this timeswitch and install in accordance with
the current IEE wiring and Building Regulations.

1

1

• Check that the total load on the circuit including when this
timeswitch is fitted does not exceed the rating of the circuit cable,
fuse or circuit breaker.

• To clean use a clean dry cloth only. Do not use liquid cleaners.

3. Technical Specifications

• Mains Supply: 220-240V AC 50Hz

• Fused: Supplied with BS1362 13A Fuse

• Rocker Switch: 2 Pole, providing isolation

• Switch Rating: 13A Resistive (3kW)

1000W Incandescent, Halogen lighting
500W Fluorescent, LED lighting
100W Compact Fluorescent lighting

• Class Protection: Class II

• Contact Type: Normally Open, micro disconnection

• Wi-Fi Specification: 2.4 GHz b/g/n only

• Frequency Range: 2.412 – 2.484 GHz

• Operating Modes: ON or OFF, Timed, Countdown

• Output Light: Yes

• Operating Temperature: 0°C to +40°C

• IP Rating: IP20 Intended for indoor use

• Minimum Depth of Wall Box: 25mm

• Multiple Device Support: Yes

• CE Compliant

• Dimensions: H 85mm, W 85mm, D 44mm

Note: Not suitable for use with Discharge Lighting.

1

2

ON/OFF
indicator

Wi-Fi
connection
indicator

only

ON/OFF
button
and pairing
button

Double pole switch BS1362 (1" x 1/4") fuse

4. Operating Modes

Timer: Schedule ON/OFF periods as required. Programes can
be set individually for each day, or for every day of the week.
Programs can be run either as a one off event, or a weekly
repeat on days of your choice.
Countdown: Keeps the unit ON/OFF for a specific amount of
time. (Countdown will reverse the state of the devices
current status i.e. if the unit is switched ON the countdown
will switch the unit OFF at the time given, and if the unit is
switched ON the countdown will switch the unit OFF at the
time given).
Relay Status: In the event of a power failure, once power is
restored, the relay can be set to be in either the ON/OFF
position by default or remember its last known position before

1

3

the power went out.

5. System Requirements

• Smartphone/Tablet with at least iOS 9.0 or Android 6.0.
Minimum software version requirements will be subject to
App updates from Tuya Inc. and not Timeguard.

• WLAN-enabled router: 2.4GHz (Separate Band)

• Tuya Smart App

6. Installation

Note: The unit is designed to replace an existing single gang
connection unit or fixed appliance outlet giving timed mains
output, protected by a BS1362 fuse. The unit is capable of
forming part of a ring main (the terminals can accept
2x 2.5mm sq. cables), or terminating a spur off the ring main.
The unit requires a minimum depth of 25mm within the box.

6.1 Ensure the mains supply is switched off and the circuit
supply fuses are removed or the circuit breaker is turned
off.

6.2 Connect the incoming 230V 50Hz mains supply and
outgoing load cables to the relevant terminals ensuring
correct polarity is observed and that all bare conductors
are sleeved (see section 7. Connection Diagram).

1

4

6.3 There is a removable cable blank to cover the front cable
exit if this feature is not required.

6.4 If the front cable exit is required, use one of the cable
clamps provided to secure the outgoing cable.

6.5 Secure the unit to the back box with the M3.5mm screws
provided, forming cables during installation to avoid
entrapment, and cable damage.

Note: during the installtion process, a suitable location
should be selected to mitigate any Wi-Fi interference.
Should the FSTWIFITU and the wireless access point be
located in an oversatureated area, where multiple
devices and wireless equipmnent such as neighbouring
Wi-Fi access points overlap, the device’s connection may
not perform as required.

230V AC 50Hz
MAINS SUPPLY

L OUT

BROWN

L IN

BROWN

BLUE

N IN

BLUE

7. Connection Diagram

• The terminals are marked as follows on the rear of the time switch;

Loop terminal for earth
continuity Green/Yellow

Mains Supply
Terminal
Live – Brown
230V 50Hz

5

Switched Live Terminal Load

live connection – Brown

Internal Schematic

Timeswitch

Switched Neutral Terminal Load
Neutral connection – Blue

BS1362 Fuse

Double Pole Switch

Mains Supply
Terminal
Neutral – Blue

APPLIANCE

N OUT

8. Downloading App & Registration

Note: the mobile or tablet device must be connected to
a 2.4GHz band on the router. Pairing on the 5GHz band
will result in paring timing out or being unsuccessful.
Refer to your ISP (Internet Service Provider) on
separating the bands if required.

8.1 Ensure your phone or tablet is connected to your local
Wi-Fi network.

8.2 Download the Tuya Smart App onto your phone
or tablet by searching for ’Tuya Smart’ on Google Play
or the App Store. You can also scan the QR code below
applicable to your device.

6

8.3 Install the App and open it to the registration screen.
Click on the ’Register’ button.

8.3 Tap ‘Agree’ to accept the privacy policy.

8.4 Choose your region by selecting your ‘Country Code’.
Enter your email address and phone number and click
‘Get Verification Code’.

8.5 Enter the verification code sent to the email address or
phone number that you provided. Once you have
successfully entered the code, the app will automatically
move you to the password screen.

8.6 Assign a password (this must be between 6 to 20
characters including letters and digits) and click ‘Done’.
The App home page will now appear.

9. Pairing Your Device(s)

7

Primary Method

Note: if you are using a VPN, make sure this is disabled before
continuing and ensure that a 2.4GHz Wi-Fi band is enabled for
this device. This method requires bluetooth connectivity.

9.1 Once you are on the home page of the Tuya Smart App,
press and hold the pairing button on the FSTWIFITU for
5 seconds, the Wi-Fi connection indicator will begin to
flash rapidly.

9.2 If a message prompt stating ‘Devices to be added’ has
not been displayed on the app, press the plus button
on the top right hand side of the app.

‘ ’

9.3 The ‘Devices to be added’ message prompt should now

be visable showing the device to add to your account,
press ’Go to add‘ to proceed to the next step.

9.4 The ‘Add device’ menu should dispay the FSTWIFITU as a

bluetooth device and already be ticked for adding to your
account ‘ ’. Press the plus button ‘ ’ to move to
entering the W-Fi password for the network your
mobile/tablet is curently connected to and then press the
‘confirm’ button to begin pairing.

9.5 Once the pairing process is complete, you can rename the

device as required or press ‘Done’ to complete the pairing
process.

Note: if the pairing process was not successful, follow
the bullet points from ‘Section 9’ to try again ensuring
that the conditions for pairing have been met from the

8

notes section.

10. Pairing Your Device(s)
Secondary Method

Note: if you are using a VPN, make sure this is disabled before
continuing and ensure that a 2.4GHz Wi-Fi band is enabled for
this device. This method requires bluetooth connectivity.

10.1 Once you are on the home page of the Tuya Smart App

Press the plus button ‘ ’ on the top right hand side of
the app.

10.2 Under the ‘Add Manually’ menu, select the ‘Electrical’

catagory on the left hand side of the app. Then select
‘Switch (Wi-Fi)’ from the devices list.

10.3 Enter the W-Fi password for the network
your mobile/tablet is curently connected to and then
press the ‘next’ button.

10.4 Press and hold the pairing button on the FSTWIFITU for
5 seconds, the Wi-Fi connection indicator will begin to
flash rapidly.

10.5 Select the ‘Confirm the indicator is blinking rapidly’
option on the App, then press the ‘next’ button to
begin the pairing process.

10.6 Shortly into the pairing process, the flashing Wi-Fi light
will stop flashing and become stable. This indicates that
the device has joined the network.

10.7 Once the pairing process is complete, you can rename
the device as required or press ‘Done’ to complete the
pairing process.

9

Note: if the pairing process was not successful, follow
the bullet points from ‘Section 10’ to try again ensuring
that the conditions for pairing have been met.

11. Smart Home Assistant

For Smart Home Assistant services such as Google Home or
Amazon Alexa, follow the on-board instructions on the
TuyaSmart App. This can be found under the ‘Me’ section on
the home page of the App.

Note: The Smart Home Assistant services supported by the
TuyaSmart App may change as it is a 3rd party App Service.
Any services that may be removed are the responsibility of
TuyaSmart developers and not Timeguard.

12. Support

Note: if you have any concerns that the intended
application of this product does not meet your
requirements, please contact Timeguard directly prior
to purchase or installtion.

If you experience problems, do not immdiately return the unit

to the store. Contact the Timeguard Customer Helpline;
Email: [e-mail] or visit our YouTube Channel
@TimeguardLimited for quick guides on our range of products.

3 Year Guarantee

In the unlikely event of this product becoming faulty due to
defective material or manufacture, within 3 years of the date of
purchase, please return it to your supplier with proof of
purchase and it will be replaced free of charge. For years 2 to 3

10

or with any difficulty in the first year, telephone our helpline.
Note: a proof of purchase is required in all cases. For all
eligible replacements (where agreed by Timeguard) the
customer is responsible for all shipping/postage charges
outside of the UK. All shipping costs are to be paid in advance
before a replacement is sent.

If you experience problems, do not immediately

return the unit to the store.

Email the Timeguard Customer Helpline:

HELPLINE

[e-mail]

or call the helpdesk on 020 8450 0515

Qualified Customer Support Coordinators will be online

to assist in resolving your query.

For a product brouchure please contact:

Timeguard Limited.

Victory Park 400 Edgware Road,

London NW2 6ND

Sales Office: 02084521112

or email [e-mail]

www.timeguard.com

67.058.681 (Issue 2)

T.W - January 2022