![](/html/c8/c840/c84078c31bbb15e058ee24389f3aa97852703f3e22eead44444ca081d77df9d7/bg1.png)
VIDEO DOOR ENTRY SYSTEM
Model: DCC1 Black and White
DCC2 Colour
DCC1/2
INSTALLATION & OPERATING INSTRUCTIONS
DCC1/2
![](/html/c8/c840/c84078c31bbb15e058ee24389f3aa97852703f3e22eead44444ca081d77df9d7/bg2.png)
1. Introduction
The DCC1/DCC2 Door Entry System enhances entry security by enabling the user
to recognise the visitor by audible and viisual means before openiing the door.
The external intercom incorporates LED lighting to illuminate the visitor for the
camera. This type of lighting has an indefi nte life.
An electric door catch (not supplied) is available as an optional extra for the
DCC1/DCC2 to make the door opening automatic.
The external and internal intercoms are connected by a four core cable. With
the cable supplied the distance between these units is limited to 15m. By using
a larger core diameter cable this distance can be increased to a maximum of
100m, see section 9 (specifi cations) for further details.
2. Product Overview
If operation with an electric door catch is required then part DCLR is a fail
(power off) secure catch available from Timeguard. It requires an additional
1
mains adaptor part DCADAP to enable operation. See fi g 2 for wiring of these
parts. An additional two core cable run (using 13/0.2 bell fl ex) will be required
between internal intercom and door catch via the additional mains adaptor.
Fig 1a - Internal intercom
(Front view - mains
adaptor not shown)
1. Handset
2. Handset on-hook switch
3. Integral speaker
4. “Door Open” button
5. “Video Off” button
6. “Video On” button
7. Monitor screen
123 456
![](/html/c8/c840/c84078c31bbb15e058ee24389f3aa97852703f3e22eead44444ca081d77df9d7/bg3.png)
Fig 1b - Internal
intercom
(Rear view and wall
mounting plate)
8. Volume control
9. Brightness control
10. Contrast control
(colour control DCC2)
11. Mains adaptor low
voltage socket
12. Wall mounting plate
10 9 8 11 12
Fig 1c - External Intercom and Wall Box
a. Camera and LED lighting assembly
b. Integral speaker
c. Name plate
d. Call button
e. Integral microphone
f. Wall box
2
ab c d e f
Knock-outs for
cable entry
![](/html/c8/c840/c84078c31bbb15e058ee24389f3aa97852703f3e22eead44444ca081d77df9d7/bg4.png)
Fig 2 - Wiring diagram
External intercom (rear
view)
Mains adaptor for door
catch (not supplied)
Part DCADAP
Electric door catch
(not supplied)
Part DCLR
3
5K1
6K2
1R (red)
2W (white)
3B (brown)
4Y (yellow)
Mains adaptor
Internal intercom
(rear view)