Time Gaurd TG24, TG44, TG64 Operating Instructions Manual

Operating

instructiOns

24 HOUR SEGMENT

TIMESWITCH

Cat. No TG24 (Single)

TG44 (Twin), TG64 (Triple)

Operating Instructions

1

Manual

override

switch

Time of day

pointer

ON segments

(pushed down)

Tough flame
retardant
casing

Time of day
setting ring

Appliance
socket

Time control segments 1 segment = 15 minutes
Push all segments downwards for ON, leave in
upward position for OFF.

TG24 (Single) / TG44 (Twin) / TG64 (Triple)
24 Hour Segment Timeswitch

2

Programming

1 Decide what times you would like the TG24/TG44 to switch

ON and OFF.

2 Push all the segments downwards for the complete duration

of an ON period and leave them all in the upper position for
an OFF period (see diagram above left).
The minimum switching interval is 15 minutes and this can
be increased in 15 minute steps.

3 Ensure that the override switch is in the timed ( ) position

as shown in the diagram above right.

Segment shown in ON
(lower) position

Override
switch

Permanently

ON

Timed

Segment shown in OFF
(upper) position