Time Gaurd SLB500-Black, SLW500-White, SLB150-Black, SLW150-White, SLB500 Installation & Operation Instructions
...
INSTALLATION & OPERATING
INSTRUCTIONS
500W PIR HALOGEN
FLOODLIGHT
SLB500-Black/SLW500-White
150W PIR HALOGEN
FLOODLIGHT
SLB150-Black/SLW150-White
WEATHERPROOF
IP44
LAMP TYPE
MAXIMUM
500w
MANUAL ON/OFF
OVERRIDE
DETECTION ANGLE
ADJUSTABLE
140°
DETECTION RANGE
ADJUSTABLE
12m
PIR SWITCHING
MAXIMUM
2000w
TIME ON
ADJUSTABLE
5sec 5min
DUSK TO DAWN
ADJUSTABLE
In the unlikely event of this product becoming faulty due to defective material
or manufacture, within 3 years of the date of purchase, please return it to your
supplier with proof of purchase and it will be replaced free of charge.
Should you encounter any difficulty please contact
our helpline on 020 8450 0515.
3 YEAR
GUARANTEE
SLB500/SLW500
500W PIR HALOGEN FLOODLIGHT
LAMP TYPE
MAXIMUM
150w
In the unlikely event of this product becoming faulty due to defective material
or manufacture, within 3 years of the date of purchase, please return it to your
supplier with proof of purchase and it will be replaced free of charge.
Should you encounter any difficulty please contact
our helpline on 020 8450 0515.
3 YEAR
GUARANTEE
WEATHERPROOF
IP44
MANUAL ON/OFF
OVERRIDE
DETECTION ANGLE
ADJUSTABLE
140°
DETECTION RANGE
ADJUSTABLE
12m
PIR SWITCHING
MAXIMUM
2000w
TIME ON
ADJUSTABLE
5sec 5min
DUSK TO DAWN
ADJUSTABLE
SLB150/SLW150
150W PIR HALOGEN FLOODLIGHT
SECTION ONE
GENERAL INFORMATION
The unit utilises passive infrared technology to detect heat radiation of moving human bodies.
Upon detection, the lamp will illuminate for a user-determined time period.
An integral daylight sensor ensures night-only operation.
PARTS INCLUDED
- Luminaire c/w PIR Sensor unit.
- Instruction manual. Please keep safe for future reference.
- Accessory Pack.
- Tungsten halogen bulb
TOOLS & PARTS NEEDED
- Electric/hand-held drill & bits.
- Terminal or Electricians screwdriver
- Large slotted/philips screwdriver
- Wire cutters
Unit is for outdoor use only. Unit must be mounted on a non-flammable surface as a fixed
luminaire, and is not suitable for portable use.
The unit can get very hot during use. Ensure the unit has cooled before handling.
Ensure adequate ventilation space is allowed between the unit and any object above, in front or
to either side of the unit. Suggested space is 0.5m above, 0.3m to either side & 1.0m in front.
If in any doubt, consult a qualified tradesperson or electrician.
SECTION TWO
SELECTING THE LOCATION
The motion detector has a number of detection zones, at various vertical and horizontal
angles as shown (see diagram A).
A moving human body needs to cross/enter one of these zones to activate the sensor. The
best all-round coverage is achieved with the unit mounted at the optimum height of 2.5m.
Careful positioning of the sensor will be required to ensure optimum performance. See
diagram A detailing detection range and direction.
The sensor is more sensitive to movement ACROSS its field of vision than to movement
directly TOWARDS (see diagram B). Therefore position the unit so that the sensor looks
ACROSS the likely approach path.
Avoid positioning the sensor where there are any sources of heat in the detection area
(extractor fans, tumble dryer exhausts etc.).
Reflective surfaces (ie pools of water or white-painted walls) and overhanging branches may
cause false activation under extreme conditions.
During extreme weather conditions the motion sensor may exhibit unusual behaviour. This
does not indicate a fault with the sensor. Once normal weather conditions return, the
sensor will resume normal operation.
Loading...