Time Gaurd SLB44, SLW45, SLB44-Black, SLW45-White Installation & Operating Instructions Manual
INSTALLATION & OPERATING
INSTRUCTIONS
60W PIR
LANTERN LIGHT
SLB44-Black/SLW45-White
In the unlikely event of this product becoming faulty due to defective material
or manufacture, within 3 years of the date of purchase, please return it to your
supplier with proof of purchase and it will be replaced free of charge.
Should you encounter any difficulty please contact
our helpline on 020 8450 0515.
3 YEAR
GUARANTEE
LAMP TYPE
MAXIMUM
60w ES
DETECTION ANGLE
ADJUSTABLE
110°
DETECTION RANGE
ADJUSTABLE
8m
WEATHERPROOF
IP43
PIR SWITCHING
MAXIMUM
60w
TIME ON
ADJUSTABLE
5sec 5min
DUSK TO DAWN
ADJUSTABLE
SLB44
PIR LANTERN LIGHT - BLACK
In the unlikely event of this product becoming faulty due to defective material
or manufacture, within 3 years of the date of purchase, please return it to your
supplier with proof of purchase and it will be replaced free of charge.
Should you encounter any difficulty please contact
our helpline on 020 8450 0515.
3 YEAR
GUARANTEE
LAMP TYPE
MAXIMUM
60w ES
DETECTION ANGLE
ADJUSTABLE
110°
DETECTION RANGE
ADJUSTABLE
8m
WEATHERPROOF
IP43
PIR SWITCHING
MAXIMUM
60w
TIME ON
ADJUSTABLE
5sec 5min
DUSK TO DAWN
ADJUSTABLE
SLW45
PIR LANTERN LIGHT - WHITE
SECTION ONE
GENERAL INFORMATION
The unit utilises passive infrared technology to detect heat radiation of moving human
bodies.
During the hours of darkness the unit fully illuminates when it senses movement within its
detection field.
PARTS INCLUDED
- Luminaire c/w PIR Sensor unit.
- Instruction manual. Please keep safe for future reference.
- Accessory Pack.
TOOLS & PARTS NEEDED
- Electric/hand-held drill & bits.
- Terminal or Electricians screwdriver
- Large slotted/philips screwdriver
- Wire cutters
Unit is for outdoor use only. Unit must be mounted on a non-flammable surface as a fixed
luminaire, and is not suitable for portable use.
The unit can get very hot during use. Ensure the unit has cooled before handling.
Ensure adequate ventilation space is allowed between the unit and any object above, in
front or to either side of the unit. Suggested space is 0.5m above, 0.3m to either side &
1.0m in front. If in any doubt, consult a qualified tradesperson or electrician.
DO NOT USE THIS PRODUCT WITH COMPACT FLUORESCENT ENERGY SAVING LAMPS.
SECTION TWO
SELECTING THE LOCATION
The motion detector has a number of detection zones, at various vertical and horizontal
angles as shown (see diagram A).
A moving human body needs to cross/enter one of these zones to activate the sensor. The
best
all-round coverage is achieved with the unit mounted at the optimum height of 1.8m.
Careful positioning of the sensor will be required to ensure optimum performance. See
diagram A detailing detection range and direction.
The sensor is more sensitive to movement ACROSS its field of vision than to movement
directly TOWARDS (see diagram B). Therefore position the unit so that the sensor looks
ACROSS the likely approach path.
Avoid positioning the sensor where there are any sources of heat in the detection area
(extractor fans, tumble dryer exhausts etc.).
Reflective surfaces (ie pools of water or white-painted walls) and overhanging branches may
cause false activation under extreme conditions.
During extreme weather conditions the motion sensor may exhibit unusual behaviour. This
does not indicate a fault with the sensor. Once normal weather conditions return, the
sensor will resume normal operation.
Loading...