Time Electronics 5069 Data sheet

t

5069 INSCAL Insulation Tester Calibration System

• Insulation resistance from 100KΩ to 100GΩ

• Basic accuracy 1%

• 10kV max

• Battery operation

• Continuous connection - no arcing

• Fully shrouded safety connectors

• it voltage

Display of open circu

(0 – 2kV or 0 – 10kV)

Time Electronics

Calibration, Test & Measuremen

• Display of short circui

t current

(0 - 2mA or 0 - 20mA)

The 5069 is a precision in
test voltages up to 10kV.

It is constructed in a high strength co-polymer plastic case and is powered by a rechargeable battery. This
ensures full isolation from the mains and prevents stray leakage. The insulation tester being calibrated can be
tested for open circuit voltage and short circuit current. These are displayed on the digital meter mounted on
the front panel. The insulation resistance is provided by a precision 4 dial decade resistance bank which can
set to a maximum of 99.99GΩ with additiona
5MΩ which can be switched in as required.

The 5069 is cons
use up to 10kV.

Resistance (Ohms): 9x10G, 9x1G, 9x100M, 9x
Resistance accuracy: 100K - 5M, 1%, 10M to 10G
Resistance temp coeff: Less than 250ppm per °C

Open circuit volta e

0 to 10kV range, accuracy 2% of FS.

Voltage display: 1.999kV full scale, and 10.00kV full scale
Short circuit curr e 0 to 2mA range, 0 to 20mA range, both rang

Current display: 1.999mA full scale, and 19.99mA full scale
Power: In geable NiCad, >500hrs between charges

tructed in the same style as Time Electronics’ well established 5080 PatCal but is suitable for

strument suitable for calibrating and testing general purpose insulation testers with

l resistance values of 100KΩ, 200KΩ, 500KΩ, 1MΩ, 2MΩ and

5069 Technical Specifications

10M plus 5M, 2M, 1M, 500K, 200K, 100K

, 1%. 10G to 100G, 5%

ge m asure:

ent m asure: es 1% of f/s accuracy

0 to 2kV range, accuracy 1% of FS

ternal battery, 6V re-char

be

General Specification

Dimensions: 406L x 246W x 175H mm

eight:W 4.4Kg

A o Safety connection plugs/leads with bareccess ries: ends to allow custom fitted connectors

Mains battery re-charger (230V 50Hz)

Ordering Information

Code Description

5069 INSCAL Insulation Tester Calibration System

9189 N.P.L. Traceable Calibration Certificate

9112 UKAS Calibration Certificate

Due to continuous development Time Electronics reserves the right to change specifications without prior notice.

Time Electronics, Botany Industrial Est. Tonbridge, Kent. England. TN9 1RH.

Tel: [phone] Fax [e-mail] : [phone] E-mail:

www.timeelectronics.co.uk

V1a 01/01/07