Time Electronics 1006 Specifications

Time Electronics

1006 DC Millivolt Source

• 3 ranges up to 1V

• Accuracy 0.02%

• 20mA output current

• Best resolution 1µV

• Short circuit and overload protected

• Safety terminals

• Removable protective cover

• Powered by 6 x AA batteries

• 100 hours typical battery life

SOFTWARE

DESCRIPTION

The 1006 is an accurate low cost millivolt source suitable for voltage injection applications.

• Optional carry case

Three output ranges are provided to give adjustable output values from 1µV to 1V with a basic 0.02%
accuracy. For signal injection, the operator needs to switch on, check the battery condition, select the
range, and set the required voltage using the thumbwheel switches. The 1006 uses a precision reference

diode and low temperature coef cient resistors to give a highly stable output.

Power is provided by 6 AA batteries. Battery life is several months, depending on usage.
The battery condition is monitored by an indicator mounted on the top of the unit.
The 1006 has up to 20mA drive current and is short circuit and overload protected.
An off/normal/reverse output polarity switch is provided.

Safety Terminals: Fitted as standard and fully compatible with 4mm shrouded plugs, as well as standard

plugs, bare wires, and spade terminals.

Added Protection: The 1006 comes  tted with an ergonomic rubber cover providing increased protection

and durability. It has a textured grip for comfortable handling and openings at the top and bottom to allow
access to the battery meter and a position to place labels if required. It is easy to remove if the user prefers
a stand-alone unit or to house the 1006 in the optional 9027 carry case.

APPLICATIONS

As an accurate millivolt source, the 1006 can be used for many applications including thermocouple
simulation (using appropriate lookup table), chart recorder calibration, A/D converter and DMM calibration,
and as a stable voltage for backing off DC offsets.

www.timeelectronics.com

1006 Specifications

TECHNICAL SPECIFICATION

Output ................................................. 0 to 999.9mV in 3 ranges

............................................................. 0 to 999.9mV in 0.1mV steps

............................................................. 0 to 99.99mV in 10µV steps

............................................................. 0 to 9.999mV in 1µV steps

Accuracy ............................................. ± 0.02% of setting + ± 0.02% of range + ± 1µV.

Output Resistance .............................. Less than 0.2Ω on 1 V and 100 mV ranges. 1Ω on 10mV range.

Maximum Output Current ................... 1V and 100mV ranges –20mA. 10mV range – Up to short circuit value although it should

............................................................. be noted that loads of less than 1kΩ will give greater than 0.1% error.

Output Voltage Stability ...................... Less than 60ppm/°C. Less than 100ppm per 3 months (non-cumulative).

Operative Temperature ....................... - 10°C to + 60°C.

Output Polarity .................................... Positive or negative switch selected. A centre ‘off’ position is also provided.

Output Noise Level ............................. Less than 30ppm of full scale

Reference Source ............................... Precision zener diode, selected for stability and low temperature coefcient.

Maximum Overload ............................. The instrument can withstand continuous short circuit on the output for all ranges.

Power Supply ...................................... 6-AA size (51x14mm) batteries. A battery condition display indicates when the batteries

............................................................. should be changed. An alternative power source is 6 NiMH cells of the same dimensions.

............................................................. These can be recharged via a socket on the top of the unit. The 6 rechargeable batteries

............................................................. and mains recharger are available as an optional extra.

GENERAL SPECIFICATION

Dimensions ......................................... 200 x 75 x 110mm (215 x 100 x 120mm including protective cover)

Weight ................................................. 0.75kg (1.2kg including protective cover)

Optional Extras .................................... Carry Case

............................................................. Rechargeable Battery Packs – 240V and 110V mains

............................................................. Calibration Certicates – traceable to NPL and UKAS

Country of Origin ................................. UK

ORDERING INFORMATION

1006 .................................................... DC Millivolt Source

9027..................................................... Leatherette Carry Case

9529..................................................... Rechargeable Battery Pack – (6 NiMH Cells + 240V Mains Charger)

9528..................................................... Rechargeable Battery Pack – (6 NiMH Cells + 110V Mains Charger)

C150 .................................................... Factory (NPL Traceable) Calibration Certicate

C100 .................................................... UKAS Calibration Certicate (ISO 17025)

Due to continuous development Time Electronics reserves

the right to change specifications without prior notice.

Time Electronics Ltd, Unit 11 Sovereign Way, Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom.

T: [phone] F: [phone] E: [e-mail]

www.timeelectronics.com

v1c 22/3/11