Time2 Outdoor Camera PC Quick Setup Manual

1

Outdoor Camera PC

Quick Setup Guide

2

Outdoor Camera

3

Connecting the Camera

1. Screw the WiFi Antenna into the gold screw at the back of the
camera.

2. Plug the power adapter into the power port lead attached to the
camera.

3. Plug one end of the Network>Ethernet cable into Ethernet port lead
attached to the camera and the other end into your WiFi Internet
Router. It will take approximately 30 seconds for the camera to
power up.

4. Once the power cable and Ethernet cable have been connected,
you will hear a faint click to indicate the camera has been connected.