TIMBERSLED TRIO, 2883324, 2883327, 2883325, 2883326 Installation Manual
TIMBERSLED TRIO™™KIT
P/N 2883324;2883325;2883326;2883327
APPLICATION
The Timbersled TRIO Kit is designed to fit the below listed makes and models of bikes. The installation
instructions given may vary slightly depending on your make and model of bike.
• Honda
• Yamaha
• Kawasaki
• Husqvarna
• KTM
• Husaberg
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering
information.
KIT CONTENTS
For installation on pre-2018 Timbersled kits the following kit is also required (sold separately):
®®
: 2013 - present CRF250/450 R, X and RX models.
®®
: 2010 - present 250/450 WR/YZ/X and FX two-stroke and four stroke models.
®®
: 2011 - present 250/450F models.
®®
®®
: 2013 - present 250/300/350/450/500 two-stroke and four stroke models.
: 2014 - present 250/300/350/450/501 two-stroke and four stroke models.
®®
: 2013-2014 450/501 models.
• PN 2883418 - Traverse Ski Upgrade Kit
Depending on your make and model of motorcycle your kit contents will vary. See table below for each kit and
their respective contents.
REF
QTY
PART
DESCRIPTION
KTM
HUSABERG
HUSQVARNA
HONDA
KIT PN
2883325
YAMAHA
KIT PN
2883326
KAWASAKI
KIT PN
2883327
KIT PN
2883324
1 1 Shock Bracket 5141838 5141840 5141843 5141845
2 2 Spacer, Long
3 2 Spacer, Short
4 4 Spacer
5 1 Screw-
-
-
5141841
5141839
- -
7519285 7519285 7519285 7519285
- -
- -
5141842 5141844
M10X1.25X55
6 4
7
1 Locking Nut 7547333 7547333 7547333 7547333
Screw-M6X1.0X30 7520874* 75208742* 7520874 7520874
8 2 Screw-M6X1.0X40
1 Instructions 9928531 9928531 9928531 9928531
Items marked with * use a quantity of 2
Instr 9928531 Rev 01 2017-06 Page 1 of 8
-
7519878
- -
KTM - HUSABERG - HUSQVARNA KIT PN: 2883324
NOTE
Slotted holesA, along with arrows indicate forward direction of the shock bracketq. Always mount shock
bracket so that the slotted holes are towards the front of the motorcycle.
HONDA KIT PN: 2883325
YAMAHA KIT NO: 2883326
Instr 9928531 Rev 01 2017-06 Page 2 of 8
KAWASAKI KIT PN: 2883327
TOOLS REQUIRED
• Safety Glasses
• Socket Set, Metric
• Wrench Set, Metric
• Torque Wrench
• Vehicle Lift/Support Equipment
IMPORTANT
Your Timbersled TRIO™Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 18-30 minutes
NOTE
Additional time may be required for optional steps, or
to accommodate other installed accessories.
Instr 9928531 Rev 01 2017-06 Page 3 of 8
Loading...