Timberk TOR 21.1206 BTX I, TOR 21.1507 BTX I, TOR 21.2009 BTX I, TOR 21.2512 BTX I, TOR 21.1206 HBX I Instruction Manual

TOR 21...BTX I
TOR 21...HBX I

TOR 31...EHX ITOR 31...QB

TOR 21...SLX I
TOR 21...SLX Z

Instruction manual

Руководство по эксплуатации

Электрический
маслонаполненный
радиатор

Модели/Models:

TOR 21.1206 BTX I
TOR 21.1507 BTX I
TOR 21.2009 BTX I
TOR 21.2512 BTX I

TOR 21.1206 HBX I
TOR 21.1507 HBX I
TOR 21.2009 HBX I
TOR 21.2512 HBX I

TOR 31.1706 EHX I
TOR 31.2007 EHX I
TOR 31.2509 EHX I
TOR 31.3012 EHX I

TOR 31.1606 QB
TOR 31.1907 QB
TOR 31.2409 QB
TOR 31.2912 QB

TOR 21.1005 SLX Z
TOR 21.1507 SLX Z
TOR 21.1809 SLX Z
TOR 21.2211 SLX Z

TOR 21.1006 SLX I
TOR 21.1507 SLX I
TOR 21.1809 SLX I
TOR 21.2212 SLX I

Electric
oil filled
radiator

Outlook of devices, aslo colour scores can be revised without any special advance
notices.

Производитель вправе менять внешний вид прибора и цветовую гамму при­бора без специального уведомления.

www.timberk.com • electric oil filled radiator

2

Dear customer!

Thank you for your good choice! You purchased a Timberk oil
filled radiator. We did everything for the unit to operate reliably
for a long time.

Timberk electric oil filled radiator is designed to heat the air
and create a comfortable environment indoors during cold
season (early spring, fall, winter). The radiator is very easy-to­use, easy to install, and also has an increased heat transfer and
an efficient air flow distribution. Besides, Timberk Professional
oil filled radiators are additionally equipped with an air ionizing
function. The built-in air ionizer can operate independently of
the air heating mode.

You must install the oil filled radiator only vertically and only on
a rigid surface (for example, on the floor) in a place, where it is
possible to connect to ~220 V single-phase power supply wiring
with an earth circuit.

1. IMPORTANT INFORMATION

Please, read this manual carefully before use of the electric oil-filled radiator.
This manual contains important information regarding your safety, as well

as recommendations concerning the correct use and maintenance of this
appliance.

Keep this manual together with a guarantee slip, cash register receipt and,
if possible, carton and packaging material.

The radiator you have bought may slightly differ from that described in the
manual, but it does not affect its use and operation procedures.

Please, read this manual carefully before use of the electric oil-filled radiator.
This manual contains important information regarding your safety, as well

as recommendations concerning the correct use and maintenance of this
appliance.

Keep this manual together with a guarantee slip, cash register receipt and,
if possible, carton and packaging material.

The radiator you have bought may slightly differ from that described in the
manual, but it does not affect its use and operation procedures.

IMPORTANT!

Important safeguards and instructions contained in
this manual do not include all possible modes and
situations. It is necessary to understand that common
sense, caution and accuracy are factors, which cannot
be ‘built-in’ any product.

These factors should be considered by a person, who
is interested in the proper operation of the appliance.
The manufacturer is nor responsible for damage of the
appliance or its parts during transportation, as a result
of incorrect installation or voltage fluctuations, as well
as when any part of the appliance has been changed
or modified.

When using the oil-filled radiator several safety precautions should be
followed in order to reduce the risk of fire, electric shock and injury to
persons. Incorrect operation due to disregard to precautions may cause
harm to health of the user and other persons, as well as damage to their
property.

1. Read this manual carefully before using the radiator.

2. The radiator is very hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Keep the radiator at least 0.9 m from furniture, pillows,
bedding, paper, clothes, curtains and other combustible materials. Let the
radiator cool down before moving. When moving radiator, use a built-in
handle.

3. Extreme caution is necessary when the radiator is used near children
and whenever the radiator is left operating and unattended.

4. Always unplug the radiator when not in use.

5. Do not operate radiator with a damaged cord or plug. To avoid the
damage of electric shock, damaged cord should be replaced only in
authorized service centers of the manufacturer by qualified specialists.

6. Do not use radiator outdoors.

7. This radiator is not intended for use in bathrooms, laundry areas or other
similar wet indoor locations. Never locate radiator where it may fall into a

2. SAFEGUARDS

www.timberk.com • electric oil filled radiator

3

Specifications of the oil-filled radiator are shown in Table 1.
Table 1

3. SPECIFICATIONS

bathtub or other water container.

8. Do not run cord of the radiator under carpeting and do not press it with
furniture. Arrange cord where it will not be tripped over.

9. To shut-off the radiator, use a power switch. Do not switch on and switch
off the appliance by connection and disconnection of electric supply.

10. Do not insert your fingers and do not allow foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock or damage
the radiator.

11. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not dry your clothes on the radiator! Do not use it on soft
surfaces, like bed, where openings may become blocked. Use the radiator
only on flat dry surface.

12. The radiator has hot sparking parts inside. Do not use it in areas where
gasoline, paint or other flammable liquids are used or stored.

13. Use this radiator only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock or injury
to persons.

14. Always unplug the radiator before cleaning. Do not submerge the
radiator. Never pull the cord.

15. Avoid the change of a cord and the use of an extension cord because
it may cause overheat and a risk of fire, as well as damage of internal
electrical network. However, if you have to use an extension cord, the cord
shall be polarized, with conductor cross-section of at least 1.0 mm2 and
rated not less than 1875 W.

16. Connect the radiator only to the ~220V/50Hz electric network. If
needed, find out the characteristics of your network from power supplier.

17. Install and operate the appliance only when upright. Do not operate the
appliance in the horizontal or on the slant.

18. The appliance is not intended for use by handicapped persons
(including children) with insufficient experience and knowledge, if they are
not under observation or have not been instructed in the use of appliance
from a person responsible for their safety. Make sure that children do not
play with the radiator.

Model Power (W) Rated current, A Fins

Dimensions

(mm)

~Net weight (kg)*

TOR 21.1206 BTX I 1200 5,45 6 315x275x625 6,0

TOR 21.1507 BTX I 1500 6,8 7 353x275x625 6,7

TOR 21.2009 BTX I 2000 9,1 9 429x275x625 8,1

TOR 21.2512 BTX I 2500 11,4 12 543x275x625 10,2

TOR 21.1206 HBX I 1200 5,45 6 315x275x625 6,0

TOR 21.1507 HBX I 1500 6,8 7 353x275x625 6,7

TOR 21.2009 HBX I 2000 9,1 9 429x275x625 8,1

TOR 21.2512 HBX I 2500 11,4 12 543x275x625 10,2

TOR 31.1706 EHX I 1700 7,7 6 323x275x625 7,4

TOR 31.2007 EHX I 2000 9,1 7 361x275x625 8,2

TOR 31.2509 EHX I 2500 11,4 9 437x275x625 9,8

TOR 31.3012 EHX I 3000 13,6 12 551x275x625 12,2

TOR 21.1006 SLX I 1000 4,5 6 277x280x625 5,6

TOR 21.1507 SLX I 1500 6,8 7 315x275x625 6,3

TOR 21.1809 SLX I 1800 8,2 9 391x275x625 7,6

TOR 21.2212 SLX I 2200 10,0 12 505x275x625 9,5

TOR 21.1005 SLX Z 800 3,6 5 239x280x625 4,9

TOR 21.1507 SLX Z 1500 6,8 7 315x275x625 6,3

TOR 21.1809 SLX Z 1800 8,2 9 391x275x625 7,6

TOR 21.2211 SLX Z 2000 9,1 11 467x275x625 8,9

www.timberk.com • electric oil filled radiator

4

Model Power (W) Rated current, A Fins

Dimensions

(mm)

~Net weight (kg)*

TOR 31.1606 QB 1600 7,3 6 315x275x625 6,6

TOR 31.1907 QB 1900 8,6 7 353x275x625 7,3

TOR 31.2409 QB 2400 10,9 9 429x275x625 8,7

TOR 31.2912 QB 2900 13,2 12 543x275x625 10,8

Noise level, dB (for models TOR 31... EHX I, TOP 31 ... QB): 58
Rated voltage, V/Hz: ~220/50

IMPORTANT!

The manufacturer reserves the right to change the set-list of the
device (including liquid and powder components) for different
supplies without prior notice. The changes either in no way
influence the basic technical parameters of the device or may
improve them, and also not violate the legislation or quality
standards of the countries of manufacture, transit and selling.

The changes in the set-list may result in changing of the weight
and dimensions of the device, but not more than by +\- 5-20%
(depending on the product category)

1. Handle for moving

2. Heading indicator

3. Thermostat hardle

4. Power mode switcher

5. Wheel

6. Ionizer switch

7. Ionizer

8. Front cover

9. Radiator sections

10. Fan heater

11. Fan heater button
12 Cord holder

1. Oil-filled radiator - 1 pc

2. Roller wheels, assembled - 2 pcs

4. Finger nut - 1 set

5. User manual - 1 pcs

6. Guarantee slip - 1 pcs

7. Packing - 1 pcs

Fig. 1

4. RADIATOR DESCRIPTION

5. DELIVERY SET

1 1

1

1

3

3

2

2

4

4

9
10

10

10

8

8

12

12

5

5

2
3
4

6

6

7

7

8

9

12

5

2
3
4

7
6
9
8

5

TOR 21...BTX I
TOR 21...HBX I

TOR 31...EHX I

TOR 21...SLX I
TOR 21...SLX Z

9

TOR 31...QB I

11

www.timberk.com • electric oil filled radiator

5

IMPORTANT!

1. Switch on and operate the radiator only when upright (with
wheels below and control elements above). Any other position
may cause a dangerous situation and result in failure of the oil­filled radiator or damage of property and the manufacturer will
consider this as a non-warranty case.

2. Do not switch the radiator on, if roller wheels are not installed.

1. Unpack the radiator and roller wheels and remove all the packaging
material.

2. Overturn the radiator on a mat or no soft surface, to avoid damage to
lacquer coating.

3. Install wheel plates on the lower part of radiator sections, into two fixed
supports.

4. Draw up two finger nuts on one side and two finger nuts on the other - in
clamp extensions passed through the wheel plate supports, after making
sure that 2 openings in the wheel plate match together with the clamp
extensions (see Figure 3).

5. Turn the radiator back and tip it up.

6. ASSEMBLY AND INSTALLATION

NOTE:

Design and technical characteristics of the convector
heater, as well as its complete set may be changed by
the manufacturer without prior notification, when it is
needed to improve its quality.

Fig. 2 Fig. 3

1. Read section «Important precautions» carefully unless you already did it.

2. Connect the unit’s power cord to an electric outlet, observing all of the
abovementioned precautions. Remember that you can connect the unit
to electric mains only if the rotating power regulator is in OFF position
(switched off), i.e. the knob is rotated against the stop counterclockwise.

3. It is also preferable to turn the temperature regulating knob against the
stop counterclockwise. Then you can connect the unit to electric mains.

4. Set the unit’s power regulator (knob) to position I, II or III (corresponds to
low, normal and maximum power of unit’s operation). Remember that the
higher the power you choose, the faster the unit heats the air. But at a low
power you save electric power and reduce the load on your electric mains.

5. After you chose the desired operating power in accordance with
your individual preferences, you have to choose the desired heating
temperature. Turning the thermostat knob clockwise (from MIN position
towards MAX position), you thus adjust the temperature mode you need.
Since the moment you choose the temperature mode (provided one or
another power mode is activated see item 4) the oil filled radiator will start
to operate.

6. During the first minutes of radiator’s operation you may fell a slight smell
of burning. It may be caused by dust on the unit; it will soon disappear.
If necessary, you can perform a preliminary preventive cleaning of the
unit, following rules, set forth in this manual and observing «Important
precautions».

7. When the room temperature will reach the desired level, you should
slowly turn the temperature regulator’s knob counterclockwise (towards
MIN). You will hear a click of the thermostat turning off, and the light on the

7. UNIT OPERATION RULES AND PROCEDURE

www.timberk.com • electric oil filled radiator

6

IMPORTANT!

For the unit to operate normally, the level of voltage in
electric mains must be sufficient in strict compliance
with the technical parameters indicated on the unit.
Carefully study the technical label, as well as all labels
with special warnings, attached to the unit’s surface.

control panel will go out. Now the room temperature will be maintained at
the chosen level.

8. If you need to reduce the room temperature, turn the thermostat knob
counterclockwise. Also you can lower the unit’s operating power (I or II).

9. If you need to raise the room temperature, turn the thermostat knob
clockwise (maximum possible position MAX indicator). Also you can raise
the unit’s operating power (II or III).

10. The lines of Timberk oil filled radiators TOR 31...QB, TOR 31...EHX
I are additionally equipped with a built-in fan heater, located on the front
panel of the unit. To speed up the room heating, activate the fan heater by
pressing the special button switch (the button can be located both on the
front panel of the unit and on the side (to the left) of the front panel of the
unit depending on the unit line).

Pressing the fan heater button, you must select the ON position (switched
on), upon that power supply will be automatically fed both to the fan motor
and to the built-in heating element. If you need to turn on the fan heater,
please, press the button again, selecting the OFF position (switched off).

The radiator is equipped with the air ionizer.
The ionizer is turned on and off with the use of a key switch on the front

panel. To turn the ionizer on, set the switch to „I”, and the green indicator
will be lit. To turn the ionizer off, set the switch to „O”, and the indicator
will go out.

The air ionizer is a completely independent appliance and may work even
when the heating mode is off.

Operating principle of the ionizer is mainly the following: the high voltage
applied to metal needles with a point diameter of 5…10 micrometers leads

8. AIR IONIZATION FUNCTION

to discharging of electrons - electric effluvium. Molecules of atmospheric
oxygen grasp these electrons, take a minus charge and become negative
air ions.

This provides for high concentration of light negative air ions of oxygen in
the air.

THE IONIZER is intended for: health promotion and prevention of various
diseases, reduction of fatigability, improvement of working efficiency and
immunity, air cleaning from aerosol contaminants, allergic agents and
microorganisms, neutralization of harmful effect of working computers, TV
sets, office equipment, restoration of biological activity of the air entering
the room from air conditioners, filters, air ducts, for making of comfort and
good humour.

Moreover, air ionizers also serve for air cleaning from: tobacco smoke,
odours, tars, dust, pollen, spores, animal hair, viruses and bacteria. The air
ionizer will help to save your health, to avoid infectious diseases, allergy and
create comfort in your house/office.

The ionizer in Timberk radiators performs the following basic functions:
it saturates the air with negative air ions making it similar to that in the forest
it eliminates the consequences of electromagnetic radiation (computers,

TV sets, etc.)
low concentration of ozone kills viruses, bacteria, fungi
It decomposes smoke, carbon monoxide and odours into non-hazardous

chemical components.

The used air ionizer conforms to the effective SanPiN 2003

The values of specified indices for concentration of air ions and unipolarity
factor are shown in Table 2 (according to SanPiN 2.2.4.1294-03):
Table 3

Rated indices

Concentration

n+ (ion/cm3)

Concentration

n- (ion/cm3)

Unipolarity

coefficient Y

Minimum

permissible

N+>=400 n->=400 0,4=<Y=<1,0

Maximum

permissible

n+<=50000 n-<=50000