Timberk TOR 22.1507 AXX I, TOR 22.2009 AXX I, TOR 22.2512 AXX I User manual

Instruction manual

Руководство по эксплуатации

Электрический маслонаполненный радиатор

Модели/Models:

Outlook of devices, aslo colour scores can be revised without any special advance notices.

Производитель вправе менять внешний вид прибора и цветовую гамму прибора без специального уведомления.

Electric oil filled radiator

TOR 22.1507 AXX I TOR 22.2009 AXX I TOR 22.2512 AXX I

Dear customer!

Thank you for your good choice! You purchased a Timberk oil filled radiator. We did everything for the unit to operate reliably for a long time.

Timberk electric oil filled radiator is designed to heat the air and create a comfortable environment indoors during cold season (early spring, fall, winter). The radiator is very easy-touse, easy to install, and also has an increased heat transfer and an efficient air flow distribution. Besides, Timberk Professional oil filled radiators are additionally equipped with an air ionizing function. The built-in air ionizer can operate independently of the air heating mode.

You must install the oil filled radiator only vertically and only on a rigid surface (for example, on the floor) in a place, where it is possible to connect to ~220 V, 50Hz single-phase power supply wiring with an earth circuit.

IMPORTANT!

Important safeguards and instructions contained in this manual do not include all possible modes and situations. It is necessary to understand that common sense, caution and accuracy are factors, which cannot be ‘built-in’ any product.

These factors should be considered by a person, who is interested in the proper operation of the appliance. The manufacturer is nor responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

2. SAFEGUARDS

1. IMPORTANT INFORMATION

Please, read this manual carefully before use of the electric oil-filled radiator. This manual contains important information regarding your safety, as well

as recommendations concerning the correct use and maintenance of this appliance.

Keep this manual together with a guarantee slip, cash register receipt and, if possible, carton and packaging material.

The radiator you have bought may slightly differ from that described in the manual, but it does not affect its use and operation procedures.

Please, read this manual carefully before use of the electric oil-filled radiator. This manual contains important information regarding your safety, as well

as recommendations concerning the correct use and maintenance of this appliance.

Keep this manual together with a guarantee slip, cash register receipt and, if possible, carton and packaging material.

The radiator you have bought may slightly differ from that described in the manual, but it does not affect its use and operation procedures.

www.timberk.com • electric oil filled radiator

When using the oil-filled radiator several safety precautions should be followed in order to reduce the risk of fire, electric shock and injury to persons. Incorrect operation due to disregard to precautions may cause harm to health of the user and other persons, as well as damage to their property.

1. Read this manual carefully before using the radiator.

2. The radiator is very hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep the radiator at least 0.9 m from furniture, pillows, bedding, paper, clothes, curtains and other combustible materials. Let the radiator cool down before moving. When moving radiator, use a built-in handle.

3. Extreme caution is necessary when the radiator is used near children and whenever the radiator is left operating and unattended.

4. Always unplug the radiator when not in use.

5. Do not operate radiator with a damaged cord or plug. To avoid the damage of electric shock, damaged cord should be replaced only in authorized service centers of the manufacturer by qualified specialists.

6. Do not use radiator outdoors.

7. This radiator is not intended for use in bathrooms, laundry areas or other

similar wet indoor locations. Never locate radiator where it may fall into a bathtub or other water container.

8. Do not run cord of the radiator under carpeting and do not press it with furniture. Arrange cord where it will not be tripped over.

9. To shut-off the radiator, use a power switch. Do not switch on and switch off the appliance by connection and disconnection of electric supply.

10. Do not insert your fingers and do not allow foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or damage the radiator.

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not dry your clothes on the radiator! Do not use it on soft surfaces, like bed, where openings may become blocked. Use the radiator only on flat dry surface.

12. The radiator has hot sparking parts inside. Do not use it in areas where gasoline, paint or other flammable liquids are used or stored.

13. Use this radiator only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.

14. Always unplug the radiator before cleaning. Do not submerge the radiator. Never pull the cord.

15. Avoid the change of a cord and the use of an extension cord because it may cause overheat and a risk of fire, as well as damage of internal electrical network. However, if you have to use an extension cord, the cord shall be polarized, with conductor cross-section of at least 1.0 mm2 and rated not less than 1875 W.

16. Connect the radiator only to the ~220V/50Hz electric network. If needed, find out the characteristics of your network from power supplier.

17. Install and operate the appliance only when upright. Do not operate the appliance in the horizontal or on the slant.

18. The appliance is not intended for use by handicapped persons (including children) with insufficient experience and knowledge, if they are not under observation or have not been instructed in the use of appliance from a person responsible for their safety. Make sure that children do not play with the radiator.

3. SPECIFICATIONS

Nominal power consumption W

Rated current A

Rated voltage V/Hz

Number of fins

Heating area m2

Water protection class

Electric protection class

Weight kg

Dimensions mm

IMPORTANT!

The manufacturer reserves the right to change the set-list of the device (including liquid and powder components) for different supplies without prior notice. The changes either in no way influence the basic technical parameters of the device or may improve them, and also not violate the legislation or quality standards of the countries of manufacture, transit and selling.

The changes in the set-list may result in changing of the weight and dimensions of the device, but not more than by +\- 5-20% (depending on the product category)

TOR 22.1507 AXX I

1500 2000 2500

6,8 9,1 11,4

~220/50 ~220/50 ~220/50

7 9 12

14-16 18-20 20-25

IPX0 IPX0 IPX0

Class I Class I Class I

7,8 9,4 11,8

625x353x275 625x429x275 625x543x275

TOR 22.2009 AXX I TOR 22.2512 AXX I

www.timberk.com • electric oil filled radiator

4. RADIATOR DESCRIPTION

Fig. 1

1. front control panel

2. roller wheels to move the radiator (included in the supply set)

3. power cable holder

4. unit’s case front panel

5. radiator’s oil containing sections

6. ASSEMBLY AND INSTALLATION

1. Unpack the radiator and roller wheels and remove all the packaging material.

2. Overturn the radiator on a mat or no soft surface, to avoid damage to lacquer coating.

3. Install wheel plates on the lower part of radiator sections, into two fixed supports.

4. Draw up two finger nuts on one side and two finger nuts on the other - in clamp extensions passed through the wheel plate supports, after making sure that 2 openings in the wheel plate match together with the clamp extensions (see Figure 3).

5. Turn the radiator back and tip it up.

Fig. 2 Fig. 3

1. Oil-filled radiator - 1 pc 2 Installation set - 1 pcs

3. User manual - 1 pcs

4. Guarantee slip - 1 pcs

www.timberk.com • electric oil filled radiator

5. DELIVERY SET

IMPORTANT!

1. Switch on and operate the radiator only when upright (with wheels below and control elements above). Any other position may cause a dangerous situation and result in failure of the oilfilled radiator or damage of property and the manufacturer will consider this as a non-warranty case.

2. Do not switch the radiator on, if roller wheels are not installed.

7. UNIT OPERATION

Control panel

Fig. 4

1. Button for timer on/off

Used for activation of the timer function for turning off of the appliance heating

2. Power mode button

The starting condition under the power adjustment, the heating power switching cycle in low/middle/high.

3. Temperature adjustment button

The starting condition press temperature ley can modify the temperature setting, the default condition temperature is 22 the temperature regulation to raise the temperature of 2 setting the corresponding indicator light, when the set temperature

C, then click the button to adjust the setting temperature, the

is 28 temperature is 16

C, each click button to set

4 ECO mode button

• The starting condition, if the machine is heating in general, press ECO set 

key, the ECO indicator lights and appliance enter into the ECO function,

C, temperature

press this button again to cancel ECO mode, ECO indicator lights off, heating function return to general settings.

• The starting condition, if the machine is in the timing, press ECO set key, 

the ECO indicator lights on and appliance enter into the ECO function, at the same time the timing function has be canceled, but the set data will be saved, press this button again to cancel ECO mode, ECO indicator lights off, heating function return to general saving settings

5. Power switch on/off button

Press ON/OFF button once to turn on the device, pressing the button again will turn off the device.

6. Keyboard lock indicator

Keyboard lock function: press and hold Timer «ON» «OFF» button together for one second, lock indicator light on, lock the keyboard, press any key has no reaction. We must also press and hold Timer «ON» «OFF» button together for one second, until the locking indicator lights off, release the lock function.

7. LED display

The display may indicate temperature and timer settings

The ECO set function

Press the ECO button, you can enter the ECO function, the corresponding indicator light.

Go to ECO mode after:

• 0 ~ 1 hour, can set the heating power and the temperature, and keep the 

temperature set point.

• 1  ~  7  hours,  the  temperature  automatically  lower  second  (when  the 

temperature is set to two lattice or grid, unchanged), the heating power and the temperature can’t be set again.

• After  7  hours,  exit  the  ECO  function,  return  the  original  temperature 

settings, and then set the heating power and the temperature.

NOTE:

If the original is the timing setting, press «ECO» button will cancel the timer.

www.timberk.com • electric oil filled radiator

+ 11 hidden pages