Timberk DH TIM 20 E7, DH TIM 25 E7 User Manual

Instruction manual

Руководство по эксплуатации

Электрический осушитель для изме-

нения влажности воздуха

Модели/Models:

Electric dehumidifier

DH TIM 20 E7 DH TIM 25 E7

Руководство по эксплуатации включает в себя гарантийный талон

Outlook of devices, aslo colour scores can be revised without any special advance notices.

Производитель вправе менять внешний вид прибора и цветовую гамму прибора без специального уведомления.

CONTENTS

1. Important information .......................................................................2

2. Safeguards .......................................................................................3

3. Specifications ................................................................................... 3

4. Appliance description .......................................................................4

5. Delivery set ....................................................................................... 5

6. Appliance control ..............................................................................5

7. Maintenance ..................................................................................... 8

8. Troubleshooting ................................................................................ 10

9. Transportatiom and storage .............................................................. 10

10. Service life ...................................................................................... 10

11. Utilization rules................................................................................10

Dear customer!

We thank you for your happy choice and buying of a electric dehumidifier TIMBERK. It will serve you for a long time.

Is intended for dehydration of air in domestic premises

1. IMPORTANT INFORMATION

Is intended for dehydration of air in domestic premises the appliance is designed for air cooling in domestic premises. The manufacturer reserves the right to introduce changes in design, configuration and processing of the article with a view to improve its properties without any prior notification of customers. There may be some misprints in text and digital notations of the present manual. If after reading of this manual you have any questions concerning work and operation of the appliance, please, refer to a shop assistant or to a specialized service center for further explanations.

The article has a label with all the needed technical data and other useful information about the appliance. Use the appliance only for its intended purpose indicated in this manual.

www.timberk.com • Electric drier for changing of air humidity

2. SAFEGUARDS

3. SPECIFICATIONS

1. DON’T CLOSE VENTS! Make sure that vent inlet and outlet are free.

2. Don’t insert foreign objects in air-outlet grille of the drier. It is very dangerous, since the fan revolves at high speed.

3. Install the appliance only on a horizontal surface to avoid water leakage.

4. Don’t install the appliance in the following locations:

- where it is exposed to direct sunlight;

- near sources of open flame;

- near other working heating appliances;

- where the appliance may be exposed to water splashes or steam.

5. Don’t use the appliance in explosive or corrosive environment. Don’t keep petrol and other volatile flammable liquids near the drier – it’s very dangerous!

6. Don’t use the appliance only for drying (reducing of humidity level) of air in domestic premises.

7. Clean the filter occasionally to ensure efficient work of the appliance.

8. To ensure reliable work of the compressor, don’t incline the appliance.

9. To avoid electric shock, a damaged power cord should be replaced only in authorized service centers by qualified specialists.

10. Connect the appliance only to 220-230V~50Hz network. If needed, find out characteristics of your network from power suppliers

Specifications are shown in table below.

Model DH TIM 20 E7 DH TIM 25 E7

Capacity of draining (L/d) 20 25

Water tank volume (L) 3 3

Rated power consumption (W) 440 550

Power supply, V/Hz 220~/50 220~/50

Rated power current (A) 2,1 2,6

Air circulation m

Noise level dB(A) 48/45 48/45

Refrigerant R135A R135A

Electrical protection class I class I class

Degree of protection against moisture IPX0 IPX0

Filling of Freon, g 105 120

Operating temperature range: ° C 5-35 5-35

Net weight (kg) 14,0 13,5

Gross weight (kg) 15,1 15,0

Net dimensions (mm) 330x260x420 330x260x420

Packing dimensions (mm) 365x285x505 365x285x505

/h 170/150 170/150

www.timberk.com • Electric drier for changing of air humidity

4. APPLIANCE DESCRIPTION

Identification of parts

Front Rear

Fig. 1

1. Control panel

2. Handle (both sides)

3. Air outlet grille

4. Water bucket

5. Water level window

Fig. 2

1. Drain hose outlet

2. Caster

3. Power Cord and plug

4. Air intake grille

5. Air filter (behind the grill)

6. Power cord Buckle(Used only when storing the unit.)

Positioning the unit

A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless here is adequate circulation of air in and out of the area.

• Do not use outdoors.

• This dehumidifer is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.

• Place the dehumidifier on a smooth, level floor strong enough to support the unit with a full bucket of water.

• Allow at least 20 cm of air space on all sides of the unit for good air circulation.

• Place the unit in an area where the temperature will not fall below

C(41OF). The coils can become covered with frost at temperatures below

C(41OF), which may reduce performance.

• Place the unit away from the clothes dryer, heater or radiator.

• Use the unit to prevent moisture damage anywhere books or valuables are stored.

• Use the dehumidifier in a basement to help prevent moisture damage.

• The dehumidifier must be operated in an enclosed area to be most effective.

• Close all doors, windows and other outside openings to the room.

NOTE:

All the pictures in the manual are for explanation purposes only.Your unit may be slightly different.The actual shape shall prevail.The operations and functions are the same.

www.timberk.com • Electric drier for changing of air humidity

Fig. 3

Casters(Install at four points on the bottom of unit)

• Casters can only move laterally.

• Do not force casters to move over carpet, nor move the unit with water in the bucket. (The unit may tip over and spill water.)

NOTE:

Casters is optional,some models without.

5. DELIVERY SET

Completed set of the appliance: Appliance (air drier) - 1 piece Appliance packing - 1 piece User manual and Guarantee slip -1 piece

6. APPLIANCE CONTROL

When using the unit

• When first using the dehumidifier, operate the unit continuously 24 hours. Make sure the plastic cover on the continuous drain hose outlet install stightly properly so there are no leaks.

• This unit is designed to operate with a working environment between

C/41OF and 35OC/95OF.

• If the unit has been switched off and needs to beswitched on again quickly, allow approximately three minutes for the correct operation to resume.

• Do not connect the dehumidifier to a multiple socket outlet, which is also being used for other electrical appliances.

• Select a suitable location, making sure you have easy access to an electrical outlet.

• Plug the unit into a electrical socket-outlet with earth connection.

• Make sure the Water bucket is correctly fitted otherwise the unit will not operate properly.

NOTE:

When the water in the bucket reaches to a certain level,please be careful to move the machine to avoid it falling down.

NOTE:

The control panel of the unit you purchased may be slightly different according to the models.

Fig. 4

Indicator lights

When you push the button to change operation modes, the unit will make a beep sound to indicate that it is changing modes.

1. COMFORT Pad (optional)

Press to activate the comfort dehumidifying operation.

www.timberk.com • Electric drier for changing of air humidity

NOTE:

On this operation,the unit can not be set humidity level.

2. Mode Pad

Press to select the desired operation mode from ehumidifying, Dryer, Continuous dehumidifying and Smart dehumidifying.

3/4. : Down/Up Pads

Humidity Set Control Pads. The humidity level can be set within a range of 35%RH(Relative

Humidity) to 85%RH(Relative Humidity) in 5% increments. For drier air, press the « » pad and set to a lower percent value(%). For damper air, press the « » pad and set a higher percent value(%). TIMER Set Control Pads Use the Up/Down pads to set the Auto start and Auto stop time from

0.0 to 24.

5. Timer Pad

Press to initiate the Auto start and Auto stop feature, in conjuction with the and key pads.

6. Turbo Pad

Control the fan speed. Press to select either High or Normal fan speed. Set the fan control to High for maximum moisture removal. When the humidity has been reduced and quiet operation is preferred, set the fan control to Normal.

7. Ion Pad(optional)

Press to activate the ionizer. Anions ar automatically generated by ionization. The anions deactive the airborne chemical vapors and dust particles. Press it again to stop the function.

8. Display

Shows the set % humidity level from 35% to 85% or auto start/stop time (0~24) while setting, then shows the actual ( ± 5% accuracy) room % humidity level in a range of RH(Relative Humidity) to 90%RH(Relative Humidity).

Error Codes and Protection Codes:

AS - Humidity sensor error--Unplug the unit and plug it back in. If error repeats, call for service. ES - Temperature sensor error-- Unplug the unit and plug it back in. If error repeats, call for service. P1 - Unit is defrosting-- Allow the unit time to automatically defrost. The protection will clear after the unit self defrosts. P2- Bucket is full or bucket is not in right position-- Empty the bucket and replace it in the right position. E3 - Unit malfunction-- Unplug the unit and plug it back in. If error repeats, call for service. EC -Refrigerant leakage detection-- With this new technology, the display area will appear EC when the unit detects refrigerant leakage, call for service.

Other features

Bucket Full Light

Glows when the bucket is ready to be emptied, or when the bucket is removed or not replaced in the proper position.

Auto Shut OFF

The dehumidifier huts off when the bucket is full, or when the bucket is removed or not replaced in the proper position.When the setting humidity is reached, the unit will be shut off automatically. For some models,the fan motor will continue operating.

Auto Defrost

When frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost disappears.

Wait 3 minutes before resuming operation

After the unit has stopped, it can not be restart opertation in the first 3 minutes. This is to protect the unit. Operation will automatically start after

3 minutes.

Smart dehumidifying mode(optional)

At smart dehumidifying mode, the unit will automatically control room humidity in a comfortable range 45%~55% according to the room temperature. The humidity setting function will be invalid.

Auto-Restart

If the unit breaks off unexpectedly due to the power cut, it will restart with

www.timberk.com • Electric drier for changing of air humidity

the previous function setting automatically when the power resumes.

Setting the Timer

• When the unit is on, first press the Timer button, the Timer Off indicator light illuminates. It indicates the Auto Stop program is initiated. Press it again the Time On indecator light illuminates.It indicates the Auto Start is initiated.

• When the unit is off, first press the Timer button, the TIMER ON indicator light illuminates. It indicates the Auto Start program is initiated. Press it again the Time Off indecator light illuminates.It indicates the Auto Stop is initiated.

• Press or hold the UP or DOWN pad to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start.

• The selected time will register in 5 seconds and the system will automatically revert back to display the previous humidity setting.

• When the Auto start & Auto stop times are set, within the same program sequence, TIMER ON OFF indicator lights illuminate identifying both ON and OFF times are now programmed.

• Turning the unit ON or OFF at any time or adjusting the timer setting to

0.0 will cancel the Auto Start/Stop function.

• When LED display window displays the code of P2, the Auto Start/Stop function will also be cancelled.

Dryer mode(optional)

The unit can make the MAX dehumidification function when it is under the Dryer mode. The fan speed is fixed at high fan speed. The humidity level is automatically controlled according to the actual room humidity.The unit will quit dryer mode after a maximum 10 hours’ operation.

NOTE:

• The Dryer mode must be operated in a close room,do not

open the door and window.

• To make the best effective dehumidification ,please first

dehydrate the wet clothes.

• Make sure to direct airflow at the wet clothes (See Fig. 5).

• For thick and heavy wet clothes may not get the best

effective dehumidification.

Fig. 5.

CAUTION!

• Do not cover the air outlet of the unit with clothes. It may cause excessive heat, fire or failure of unit.

• Do not place the wet clothes on the top of the unit and do not make the water drop into the unit. It may cause electric shock,creepage or failure of unit.

www.timberk.com • Electric drier for changing of air humidity

7. MAINTENANCE

Removing the collected water

There are two ways to remove collected water.

1. Use the bucket

• When the unit is off,if the bucket is full, the Full indicator light will light.

• When the unit is on,if the bucket is full, the compressor and the fan turn off, and the Full indicator light will light, the digital display shows P2.

• Slowly pull out the bucket. Grip the left and right handles securely, and carefully pull out straight so water does not spill. Do not put the bucket on the floor because the bottom of the bucket is uneven. Otherwise the bucket will fall and cause the water to spill.

• Throw away the water and replace the bucket. The bucket must be in right place and securely seated for the dehumidifier to operate.

• The machine will re-start when the bucket is restored in its correct position.

2. Continuous draining

Water can be automatically emptied into a floor drain by attaching the unit with a water hose (not included).

• Cut the cover down from the back drain hose outlet. Attach a drain hose(ID=13.5mm) and lead it to the floor drain or a suitable drainage facility(see Fig.7).

• Make sure the hose is secure so there are no leaks.

• Direct the hose toward the drain,making sure that there are no kinks that will stop the warter flowing.

• Place the end of the hose into the drain and make sure the end of the hose is level or down to let the water flow smoothly.Do never let it up.

• Select the desired humidity setting and fan speed on the unit for continuous draining to start.

Fig. 7

Fig. 6

NOTE:

• When you remove the bucket, do not touch any parts inside of the unit. Doing so may damage the product.

• Be sure to push the bucket gently all the way into the unit. Banging the bucket against anything or failing to push it in securely may cause the unit not to operate.

• When you remove the bucket,if there is some water in the unit you must dry it .

www.timberk.com • Electric drier for changing of air humidity

NOTE:

When the continuous drain feature is not being used, remove the drain hose from the outlet and attach the rubber plug back to the drain outlet.

Care and cleaning of the dehumidifier

Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.

1. Clean the Grille and Case

• Use water and a mild detergent. Do not use bleach or abrasives.

• Do not splash water directly onto the main unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust.

• The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to clean.

2. Clean the bucket

Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Partially fill the bucket with clean water and add a little mild detergent. Swish it around in the bucket, empty and rinse.

CAUTION!

DO NOT operate the dehumidifier without a filter because dirt and lint will clog it and reduce performance.

NOTE:

Do not use a dishwasher to clean the bucket. After clean, the bucket must be in place and securely seated for the dehumidifier to operate.

3. Clean the air filter

The air filter behind the front grille should be checked and cleaned at least every 30 days or more often if necessary.

CAUTION!

DO NOT RINSE OR PUT THE FILTER IN AN AUTOMATIC DISHWASHER.

To remove:

• Grip the tab on the filter and pull it upward, then pull it out as shown in Fig.8.

• Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it. Do not clean the filter in a dishwasher.

To attach:

Insert the air filter into the unit from underside to upside. See Fig.9.

Fig. 9

4. When not using the unit for long time periods

• After turning off the unit, wait one day before emptying the bucket.

• Clean the main unit, bucket and air filter.

• Cover the unit with a plastic bag.

• Store the unit upright in a dry, well-ventilated place.

www.timberk.com • Electric drier for changing of air humidity

8. TROUBLESHOOTING

9. TRANSPORTATIOM AND STORAGE

Before calling for service, review the chart below first yourself.

Problem What to check

• Make sure the dehumidifier s plug is pushed completely into

Unit does not start

Dehumidifier does not dry the air as it should

The unit makes a loud noise when operating

Frost appears on the coils

Water on floor

ES, AS, P1 or P2 appear in the display

the outlet.

• Check the house fuse/circuit breaker box.

• Dehumidifier has reached its preset level or bucket is full.

• Water bucket is not in the proper position.

• Did not allow enough time to remove the moisture.

• Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier.

• The humidity selector may not be set low enough.

• Check that all doors, windows and other openings are securely closed.

• Room temperature is too low, below 5

• There is a kerosene heater or something giving off water vapor in the room.

• The air filter is clogged.

• The unit is tilted instead of upright as it should be.

• The floor surface is not level.

This is normal. The dehumidifier has Auto defrost feature.

• Hose to connector or hose connection may be loose.

• Intend to use the bucket to collect water, but the back drain plug is removed.

These are error codes and protection code. See the CONTROL PADS ON THE DEHUMIDIFIER section.

C(41 0F).

Temperature requirements*

Humidity requirements*

Transportation and storage

From -30° to +50°

From 15% to 85%

(without a condensate)

We are exploring new technologies and we constantly improving the quality of our products. That’s why specifications, design and accessories are subject to change without any specific notice.

* This product must have storage in dry, well-ventilated space of warehouse at the temperature not lower than -30°

10.SERVICE LIFE

Service life of the appliance is 10 years provided that the respective installation and operation rules are observed.

Date of the conditioner manufacture is shown in a serial number of the device. For more details, please, ask a shop assistant.

11. UTILIZATION RULES

Upon expiration of the service life, the appliance should be utilized in accordance with norms, regulations and procedures effective in the place of utilization.

www.timberk.com • Electric drier for changing of air humidity

+ 22 hidden pages