TILLYTEC Mini uni, Maxi uni User Manual

-1-

User manual

Min

i uni

Safety Advice

• Before using the torch, ensure that you read and understand the safety advice leaflet so that the torch is
always operated correctly.

• Never point the light beam at your or other persons eyes. Doing so could damage the retina.

• Keep the torch away from children.

• Never attempt to take the torch apart unless it is specifically directed in the operating instructions. Doing so

can result in severe injuries and electric shocks. Servicing of internal components, servicing or repairs have
to be carried out by qualified persons, authorized by the manufacturer.

• If smoke or steam appears, switch off the mains or battery supply immediately. Disconnect the torch head
from the battery and remove the charger from the socket.

• Do not touch the charger’s power cable with wet hands as there is danger of an electric shock or short
circuit. To disconnect, depress the catch on the connector whilst withdrawing it from the charging adapter
plug. Do not disconnect it by pulling on the cable.

• To prevent overheating, damage, fires, electric shocks or other dangers only use the charger and
attachments supplied.

• Keep the torch and battery pack away from open fires or sources of heat as it could lead to overheating,
fires, electric shocks and explosions and cause severe injury.

• Never attempt to change or take apart the battery pack. To do so could lead to injury by explosion.

• Do not drop the batteries or battery packs and protect them from impact. Damage could result in leakage of

the battery chemicals and result in injuries.

• Clean with water all areas of the body (especially mouth and eyes) or clothing that come in contact with
battery chemicals.

• Never short across the battery contacts with metal objects (e.g. key rings, screwdrivers etc) as this could
result in overheating and to burns and other injuries.

• After charging disconnect the charger from the battery pack and the mains socket to avoid fires or other
damage.

• The charger supplied with the torch has been developed for use exclusively with the torch and battery pack.
Do not use it with other products or batteries as this could result in fires or damage.

• Use and store the torch, battery pack and charger away from exposure from heavy solar radiation or high
temperature (e.g. the dashboard or the boot of a car etc.). Heavy solar radiation and heat can lead to
leakage, overheating or explosion of the batteries which can result in fire other damage.

• While charging the battery pack keep it in a well ventilated area.

• Charge the battery pack at room temperature.

• If the batteries become too warm, cease charging immediately. Normal temperature is slightly higher than

“hand-hot“ ( +/- 50 degree )

• Let the batteries cool down after charging.

• Use the torch, battery pack and accessories only when diving. Using the products or other component parts

for other purposes is not allowed.

Advice on Using Battery Chargers

11. You can use (series) with the short tube:

12. - 1 x 18650 rechargeable battery

13. You can use with the long tube (optional):

14. - 2 x 18650 rechargeable battery

15. - 3 x AA non rechargable batteries (1,5 V) or NiMh rechargeable batteries (1,2 V)

16. For the cell 18650 and 26650 we recommend only to use batteries from type
LiCoMn (lithium – cobalt – mangan). Otherwise there is danger for explosion !

* available only at Tilly-direct

-2-

All mentioned batterys and suitable charger are available at

TILLYTEC.de under accessoires !

Advice on using LED modules

7. There are many different so called „P60 Drop in“ LED modules

8. Some of theese LED modules have a dimming

9. If you use a „P60 Drop in“ LED module with dimming, then the switching of the

10. dimming steps is by switching off and on again (by turning the light head)

IMPORTANT : Switching off and on must take place very quickly!

User manual

Maxi uni

General Care and Usage Instructions

1. The O-rings (sealing rings) should only be removed if they require replacing.

2. Lubricate the O-rings occasionally with a smear of silicone grease. Please do not apply

to much grease. Do not use silicone spray !

3. Regularly inspect the O-rings for damage or contamination, and change them if

necessary. We recommend that you carry spare O-rings.

4. The torches can be operated out of water for a short time, however they will become

very hot very quickly so do not leave unattended. Only operate until the torch head
becomes warm.

5. After use rinse the torch thoroughly with fresh water whilst still attached to the umbilical
and battery pack. Never use any other cleaning agents.

6. Do not shine the torch into your eyes or the eyes of others as severe damage to the
retina could result.