
Issuing Date January 5, 2015
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Clorox Commercial Solutions® Tilex® Disinfects Instant Mold & Mildew Remover
Other means of identification
Recommended use of the chemical and restrictions on use
Mold and mildew remover spray
Details of the supplier of the safety data sheet
Supplier Address
The Clorox Company
1221 Broadway, Oakland, CA 94612
USA
Phone: 1-510-271-7000
Emergency telephone number
For Medical Emergencies, call: 1-800-446-1014
For Transportation Emergencies, call Chemtrec: 1-800-424-9300
2. HAZARDS IDENTIFICATION
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).
Skin corrosion/irritation
Serious eye damage/eye irritation

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
GHS Label elements, including precautionary statements
Hazard Statements
Causes mild skin irritation
Causes serious eye irritation
Appearance Clear, pale yellow
Odor Herbaceous, marine, bleach
Precautionary Statements - Prevention
Wash hands and any exposed skin thoroughly after handling.
Wear eye protection/face protection such as safety glasses.
Precautionary Statements - Response
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin
If skin irritation occurs: Get medical advice/attention.
Precautionary Statements - Storage
None
Precautionary Statements - Disposal
None
Hazards not otherwise classified (HNOC)
The following medical conditions may be aggravated by exposure to high concentrations of vapor or mist: heart conditions or
chronic respiratory problems such as asthma, emphysema, or obstructive lung disease.
Unknown Toxicity
0.085% of the mixture consists of ingredient(s) of unknown toxicity
Toxic to aquatic life with long lasting effects
Very toxic to aquatic life
Interactions with Other Chemicals
Reacts with other household chemicals such as products containing ammonia, toilet bowl cleaners, rust removers, vinegar, or acids to
produce hazardous gases, such as chlorine and other chlorinated compounds.

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
3. COMPOSITION/INFORMATION ON INGREDIENTS
* The exact percentage (concentration) of composition has been withheld as a trade secret.
Show this safety data sheet to the doctor in attendance.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open
while rinsing. Do not rub affected area. Get medical attention if irritation develops and
persists.
Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20
minutes. If irritation develops, call a doctor.
Move to fresh air. If breathing is affected, call a doctor.
Call a poison control center or doctor immediately. Have person sip a glassful of water if
able to swallow. DO NOT induce vomiting unless told to do so by a poison control center
or doctor.
Protection of First-aiders
Avoid contact with skin, eyes or clothing. Use personal protective equipment as required.
Wear personal protective clothing (see section 8).
Most important symptoms and effects, both acute and delayed
Most Important Symptoms and
Effects
Stinging and irritation of eyes.
Indication of any immediate medical attention and special treatment needed

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable Extinguishing Media
CAUTION: Use of water spray when fighting fire may be inefficient.
Specific Hazards Arising from the Chemical
No information available.
Sensitivity to Mechanical Impact
Sensitivity to Static Discharge
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid contact with eyes, skin, and clothing. Use personal protective equipment as
required.
Refer to protective measures listed in Sections 7 and 8.
Environmental precautions
Environmental Precautions
See Section 12 for ecological Information.
Methods and material for containment and cleaning up
Prevent further leakage or spillage if safe to do so.
Absorb and containerize. Wash residual down to sanitary sewer. Contact the sanitary
treatment facility in advance to assure ability to process washed-down material.

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Do not eat, drink or smoke when using this product.
Conditions for safe storage, including any incompatibilities
Keep containers tightly closed in a dry, cool and well-ventilated place.
Products containing ammonia, toilet bowl cleaners, rust removers, vinegar, or acids.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Sodium hydroxide
1310-73-2
IDLH: 10 mg/m3
Ceiling: 2 mg/m3
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value. OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits. NIOSH IDLH: Immediately Dangerous to Life or Health.
Appropriate engineering controls
Showers
Eyewash stations
Ventilation systems
Individual protection measures, such as personal protective equipment
If splashes are likely to occur: Wear safety glasses with side shields (or goggles). None
required for consumer use.
Wear protective gloves and protective clothing.
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Positive-pressure supplied air respirators may be
required for high airborne contaminant concentrations. Respiratory protection must be
provided in accordance with current local regulations.
Remove and wash contaminated clothing before re-use. Avoid contact with skin, eyes or
clothing. Do not eat, drink or smoke when using this product.

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and Chemical Properties
Physical State
Herbaceous, marine, bleach
Boiling point / boiling range
Flammability (solid, gas)
Flammability Limits in Air
Solubility in other solvents
Partition coefficient: n-octanol/water
Decomposition temperature
Particle Size Distribution
10. STABILITY AND REACTIVITY
Reacts with other household chemicals such as products containing ammonia, toilet bowl cleaners, rust removers, vinegar, or acids to
produce hazardous gases, such as chlorine and other chlorinated compounds.
Chemical stability
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Conditions to avoid
None known based on information supplied.
Incompatible materials
Products containing ammonia, toilet bowl cleaners, rust removers, vinegar, or acids.
Hazardous Decomposition Products
None known based on information supplied.

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Exposure to vapor or mist may irritate respiratory tract.
May cause eye irritation.
Prolonged contact may cause irritation.
Ingestion may cause irritation to mucous membranes and gastrointestinal tract, nausea,
vomiting, and diarrhea.
Sodium hypochlorite
7681-52-9
Sodium hydroxide
1310-73-2
Information on toxicological effects
May cause redness and tearing of the eyes.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
No information available.
No information available.
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Sodium hypochlorite
7681-52-9
IARC (International Agency for Research on Cancer)
Group 3 - Not Classifiable as to Carcinogenicity in Humans
No information available.
No information available.
No information available.
Carcinogenic potential is unknown.
Respiratory system, eyes, skin, gastrointestinal tract (GI).
No information available.
Numerical measures of toxicity - Product Information
The following values are calculated based on chapter 3.1 of the GHS document
Not applicable

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
12. ECOLOGICAL INFORMATION
Very toxic to aquatic life. Toxic to aquatic life with long lasting effects.
Persistence and Degradability
No information available.
Bioaccumulation
No information available.
Other adverse effects
No information available.
13. DISPOSAL CONSIDERATIONS
Dispose of in accordance with all applicable federal, state, and local regulations.
Do not reuse empty containers. Dispose of in accordance with all applicable federal, state, and local regulations.
14. TRANSPORT INFORMATION
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SODIUM
HYPOCHLORITE), 9, III, MARINE POLLUTANT
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SODIUM
HYPOCHLORITE), 9, III
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SODIUM
HYPOCHLORITE), 9, III

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
Product is a marine pollutant according to the criteria set by IMDG/IMO
UN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (SODIUM
HYPOCHLORITE), 9, III, MARINE POLLUTANT
15. REGULATORY INFORMATION
All components of this product are either on the TSCA 8(b) Inventory or otherwise exempt
from listing.
All components are on the DSL or NDSL.
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List
SARA 313
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any
chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
SARA 311/312 Hazard Categories
Sudden Release of Pressure Hazard
Clean Water Act
This product contains the following substances which are regulated pollutants pursuant to the Clean Water Act (40 CFR 122.21
and 40 CFR 122.42)
CWA - Reportable
Quantities
CWA - Priority Pollutants
CWA - Hazardous
Substances
Sodium hypochlorite
7681-52-9
Sodium hydroxide
1310-73-2
CERCLA
This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302)
Extremely Hazardous Substances
RQs
Sodium hypochlorite
7681-52-9
RQ 100 lb final RQ
RQ 45.4 kg final RQ
Sodium hydroxide
1310-73-2
RQ 1000 lb final RQ
RQ 454 kg final RQ

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
EPA Statement
This chemical is a pesticide product registered by the Environmental Protection Agency and is subject to certain labeling
requirements under federal pesticide law. These requirements differ from the classification criteria and hazard information
required for safety data sheets and for workplace labels of non-pesticide chemicals. Following is the hazard information as
required on the pesticide label:
WARNING: Causes substantial but temporary eye injury and can irritate skin. For sensitive skin or prolonged use, wear
gloves. Do not get in eyes or on clothing. Vapors may irritate. Use only in well-ventilated areas. Avoid prolonged
breathing of vapors. Not recommended for use by persons with heart conditions or chronic respiratory problems
such as asthma, emphysema or obstructive lung disease. Due to irritating nature, may be harmful if swallowed.
California Proposition 65
This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations
Sodium hypochlorite
7681-52-9
Sodium hydroxide
1310-73-2
International Regulations
WHMIS Hazard Class
D2B - Toxic materials

Clorox Commercial Solutions® Tilex® Disinfects Instant Mold &
Mildew Remover
Physical and Chemical Hazards -
Product Stewardship
23 British American Blvd.
Latham, NY 12110
1-800-572-6501
General Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.