Tiinlab Acoustic Technology YPJSQ01JY Users manual
Mi Bluetooth Audio Receiver User Manual
YPJSQ01JY
Product Overview
Jack Port
Multi-function
Button
Indicator
Charging Port
0.14in Audio Cable Connect
to any device with an AUX IN
port, and transmit music from
your digital device.
Turning on
Press and hold the multi-function button for 3 seconds,
followed by one blue ash to turn on the receiver.
If no connection record is detected, the red and blue lights
ash alternately and the receiver waits for a connection.
If connection records are detected, the blue light ashes
twice and the receiver automatically pairs with the
connected Bluetooth device, conrmed by blue light
breathing. If the connection fails, the receiver enters standby
mode with red and blue lights ashing alternately.
Turning off
Press and hold the multi-function button for 5 seconds to
turn off the receiver.
Charging
During charging, the indicator light is red, and will turn off
once fully charged.
During charging when turned on, the receiver will reboot
and reconnect to the Bluetooth device.
Connecting
Connecting to a new Bluetooth device
When turned off, press and hold the multi-function button
for 5 seconds, followed by red and blue light ashing
alternately, and the receiver is ready to be connected.
Locate and connect to Mi Bluetooth Audio Receiver, If your
phone prompts for a password, enter "0000". Conrmed
by blue light breathing. If the receiver fails to connect to any
Bluetooth device in 5 seconds, it will turn off automatically.
When the receiver is turned on and connected to a
Bluetooth device, press and hold the multi-function button
for 3 seconds to enter standby mode with red and blue
lights ashing alternatly.
Connecting to 2 phones
When phone A is connected to the receiver, press and
hold the multi-function button for 3 seconds to enter
standby mode. Then locate and connect the receiver in
phone B. When phone B is connected, select Mi Bluetooth
Audio Receiver in phone A to complete connection to 2
phones.
Clearing connection records
Press the multi-function button 5 times continuously to
clear connection records.
Connection lost
When your phone turns off Bluetooth feature or is out of
wireless range, the receiver automatically enters standby
mode, and will turn off when not connected to any device
in 5 minutes.
Functions
Call playing*:
Answer calls: press
Reject calls: press and hold for 2 seconds
Last number redial: press twice
Call waiting:
Press to put the current call on hold to
answer the incoming one.
Press and hold for 2 seconds to
continue the current call and reject the
incoming one.
Switch between calls:
When answering two calls, press twice to
switch between calls.
Music playing
Play/Pause: press
Track forward: press twice
Track backward: press 3 times
* Answer calls using the microphone on your headset or
phone.
Specications Principal: Xiaomi Communications Co., Ltd.
Model: YPJSQ01JY
Input: 5V 1A
Weight: 0.35oz
Wireless range: 393.7in
Charging time: 2h
Max. play time: 4h
Wireless connectivity: Bluetooth 4.2
Bluetooth proles:
HFP/HSP/A2DP/AVRCP
Charging port: Micro-USB
FCC ID: 2AN5MYPJSQ01JY
Dimensions: 3.82 2.76 0.83in
× ×
FCC
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
RF warning statement:
The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
Read this manual carefully before use, and retain it for
future reference.
Manufacturer: TiinLab Acoustic Technology (Shenzhen)
Co., Ltd. (a Mi Ecosystem Company)
Address: Tianliao Building F14 East Block (New Materials
Industrial Park), Xueyuan Road, Nanshan District,
Shenzhen, P.R. China
For further information, please go to www.mi.com
Loading...