Tiinlab Acoustic Technology LYXQEJ02JY User Manual
Mi Bluetooth Neckband Earphones Basic
Manufacutred for: Xiaomi Communications Co., Ltd.
Manufactured by: TiinLab Acoustic Technology (Shenzhen) Co., Ltd.
For further information, please go to www.mi.com
(a Mi Ecosystem company)
For warrantyinformation, please visit mi.com.
Reconnecting
Aer turned on, the unit will reconnect to the last paired device. If
there's no prior connection history, or that it fails to reconnect to
any device, the unit will enter standby mode and wait for
connection.
Clearing Connection History
When turned on, press and hold both Volume + and Volume buons for 5 seconds to clear all connection history. Then the unit
enters standby mode and waits for connection.
Connection Lost
When your phone turns off Bluetooth feature or is out of wireless
range, the unit will enter standby mode. If connection is not restored
within 5 minutes, the unit will turn off automatically.
Functions
Incoming calls Music
Press: volume +
Press and hold: track backward
Press: volume -
Press: answer
Press and hold: decline
Note:
Power and volume display: iOS support, may not support other
devices.
Do not use power bank to charge Mi Bluetooth Neckband
Earphones Basic.
Press and hold: track forward
Press × 1: play/pause
Product Overview
Micro-USB charging port
Volume +
Volume -
Indicator
Power buon
Mic/Indicator
Turning on
Press and hold the power buon for 3 seconds, followed by one blue
flash to turn on the unit.
The unit is ready to be paired when turned on for the first time.
Turning off
Press and hold the power buon for 3 seconds, followed by one red
flash to turn off the unit.
Charging
The indicator light turns red when charging, and goes off when fully
charged. When turned on, the unit will reboot when you charge it.
Connecting
Connecting to a new Bluetooth device
When turned off, press and hold the power buon for 3 seconds,
followed by blue light flashing, and the unit is ready to be connected.
Turn on Bluetooth feature on your phone and locate "Mi Bluetooth
Neckband Earphones Basic". If your phone prompts for a password,
enter "0000", and the indicator turns blue breath light.
Specifications
Model: LYXQEJ02JY
Input: 5 V 1.0 A
Weight: 35 g
Wireless range: 10 m
Wireless connectivity: Bluetooth 4.2
Bluetooth profiles: HFP/HSP/A2DP/AVRCP
Charging time: 50 minutes
Playback time: 7 h
Charging port: Micro-USB
Dimensions: 198 × 170 × 38 mm
WEEE
Electrical and electronic equipment, parts and baeries marked
with this symbol must not be disposed of with normal household
wastage, it must be collected and disposed of separately to protect
the environment.
Your Tiinlab retailer will advise you of the correct way of disposal in
your country.
CE
Hereby, Tiinlab, declares that this equipment is in compliance with
the applicable Directives and European Norms, and amendments.
The full text of the EU declaration of conformity is available at the
following internet address: hps://www.mi.com/en/service/support/declaration.html
Safety Caution:
Do not expose baeries or baery packs to excessive heat such as
sunshine, fire or the like.
FCC Warning :
FCC ID: 2AN5MLYXQEJ02JY
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generat es, uses and c an r adiat e r adio freq uency en erg y and, i f not ins tal led and used i n ac cor dance w i th the ins tructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment do es cause h armful inter fer ence t o ra dio or tel evi sion r eceptio n, w hic h can be de termi ned by t urning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter
Loading...