Tiinlab Acoustic Technology DH3001B Users manual
DH3001B
DH3001B
1MORE Hi-D efinition Blu etooth Adapter Us er Guide
1MORE 高清蓝牙接收器 用户指南
开机
长按多功能键3秒。蓝灯闪1次后开机。
如果没有检测到连接记录，红、蓝灯交替闪烁，接收器等待
连接。
如果检测到连接记录，蓝灯闪两次后，接收器自动搜索连接
过的蓝牙设备，连接成功后，蓝灯转为呼吸灯状态。如连接
失败，接收器转入等待连接状态，此时红、蓝灯交替闪烁。
关机
长按多功能键5秒，接收器关闭。
充电
充电时指示灯为红色常亮，充电完成后指示灯熄灭。在开机
状态下充电时，接收器将重启并重新连接蓝牙设备。
连接
配对新蓝牙设备
关机状态下，长按多功能键5秒，红、蓝灯交替闪烁，接收
器等待连接。使用手机搜索并连接蓝牙设备：1MORE BT�
Adapter。若手机端要求提供连接密码，输入“0000”。连接
成功后，蓝灯转为呼吸灯状态。如果5分钟内没有连接到任
何蓝牙设备，接收器自动关机。
开机且已经连接了蓝牙设备的状态下，长按多功能键 3 秒，
接收器转入等待连接状态，此时红、蓝灯交替闪烁。
连接两部手机
手机A成功连接接收器后，长按接收器的多功能键3秒，接收
器进入等待连接状态，使用手机B搜索并连接接收器。
接收器与手机B成功连接后，在手机A的已配对蓝牙设备列表
中选择本接收器，此时接收器与两部手机完成连接。
清除连接记录
连续按5次多功能键，接收器的所有连接记录将被清除。
连接中断
当手机关闭了蓝牙连接或超出连接范围时，接收器自动进入
等待连接状态，若5分钟内没有连接到任何设备，接收器自
动关机。
产品参数
产品型号：DH3001B
产品尺寸：51.5*15.5*13.5mm
产品重量：11.5g
充电接口：Type-C
充电时间：2小时
使用时长：8小时
通讯距离：10米
蓝牙规范：Bluetooth® 5
蓝牙协议：HFP / HSP / A2DP / AVRCP
输 入：5V 1A
* 规格参数为实验室测试数据
产品售后保修说明 非保修条例
1MORE 高清蓝牙接收器产品售后服务严格依据《中华人民
共和国消费者权益保护法》、《中华人民共和国产品质量
法》实行售后三包服务，服务内容如下：
在三包有效期内，您可以依照本规定免费享受退货、换货
、维修的服务，退货、换货、维修应当凭发票办理。
1、7日无理由退货（电商购买渠道），由用户承担物流费
用；
2、本产品出现《产品性能故障表》所列性能故障的情况，
经检测确定后，可以免费享受如下服务。
服务类型
退货
换货
维修
自签收次日起7天内产品质量原因退货
自签收次日起15天内产品质量原因换货
自签收次日起1年内产品质量原因维修
服务政策
产品性能故障表
名称
1MORE
高清蓝牙接收器
因结构或材料因素造成的耳机主体破损
性能故障
说明书所列功能失效
按键功能失效
无法充电
1、未经授权的维修、误用、碰撞、疏忽、滥用、进液、事
故、改动、不正确的使用非本产品配件，或撕毁、涂改
标贴、防伪标记；
2、已超过三包有效期；
3、因不可抗力造成的损坏；
4、不符合《产品性能故障表》所列性能故障的情况；
5、因人为原因导致本产品及其配件产生《产品性能故障表》
所列性能故障。
更多服务可登陆1MORE官网 www.1more.com，点击“服务”
项或咨询服务热线：400-992-0909
产品中有害物质的名称及含量
部件名称
塑胶部件
电路板及组件
电池
对接线
金属部件
本表格依据SJ/T 11364的规定编制。
：表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规
定的限量要求以下。
：表示该有害物质至少在该部件的某一均质材料中的含量超出
GB/T 26572规定的限量要求。
本产品符合欧盟RoHS2.0(2011/65/EU)环保标准
有害物质
镉
六价铬
铅
汞
(Cd)
(Pb)
(Hg)
(Cr(VI))
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
Turning on
Press and hold the multi-function button for 3 seconds, followed
by one blue ash to turn on the receiver.
If no connection record is detected, the red and blue lights ash
alternately and the receiver waits for a connection.
If connection records are detected, the blue light ashes twice
and the receiver automatically pairs with the connected Bluetooth
device, conrmed by blue light breathing. If the connection fails,
the receiver enters standby mode with red and blue lights ashing
alternately.
Turning off
Press and hold the multi-function button for 5 seconds to turn off
the receiver.
Charging
During charging, the indicator light is red, and will turn off once
fully charged.
During charging when turned on, the receiver will reboot and
reconnect to the Bluetooth device.
Connecting
Connecting to a new Bluetooth device
When turned off, press and hold the multi-function button for 5
seconds, followed by red and blue light ashing alternately, and
the receiver is ready to be connected. Locate and connect to
1MORE BT Adapter, If your phone prompts for a password,
enter "0000". Conrmed by blue light breathing. If the receiver
fails to connect to any Bluetooth device in 5 seconds, it will turn
off automatically. When the receiver is turned on and connected
to a Bluetooth device, press and hold the multi-function button
for 3 seconds to enter standby mode with red and blue lights
ashing alternatly.
折起尺寸：60*86mm
Connecting to 2 phones
When phone A is connected to the receiver, press and hold the
multi-function button for 3 seconds to enter standby mode.
Then locate and connect the receiver in phone B. When phone
B is connected, select Mi Bluetooth Audio Receiver in phone A
to complete connection to 2 phones.
Clear connection records
Press the multi-function button 5 times continuously to clear
connection records.
Connection lost
When your phone turns off Bluetooth feature or is out of wireless
range, the receiver automatically enters standby mode, and will
turn off when not connected to any device in 5 minutes.
Specications
Model: DH3001B
Product Size: 51.5 × 15.5 × 13.5 mm
Product Weight: 11.5 g
Charging Port: Type-C
Charging Time: 2 Hours
Battery Life: 8 Hours
Wireless Range: 10 m
Bluetooth: Bluetooth® 5
Bluetooth Protocol: HFP / HSP / A2DP / AVRCP
Input: 5V 1A
* The specications are acquired from laboratory tested data.
WEEE
Electrical and electronic equipment, parts and batteries marked
with this symbol must not be disposed of with normal household
wastage, it must be collected and disposed of separately to
protect the environment.
Your Tiinlab retailer will advise you of the correct way of disposal
in your country.
CE
Hereby, Tiinlab, declares that wireless headphone is in
compliance with the essential requirement and relevant
provisions of Directive 2014/53/EU.
Safety Caution:
Do not expose batteries or battery packs to excessive heat such
as sunshine, re or the like.
www.1more.com
制造商：万魔声学科技有限公司
地址：深圳市南山桃源街道田寮工业A区田寮大厦1403
Manufacturer: 1More Acoustic Technology Co., Ltd
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park,
Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China
110g无光铜+哑油
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Loading...