Tii SCT-A User Manual

r

r

p

141 Rodeo Drive tii SCT-A
Edgewood, NY 11717 Active Sealing Current Terminator
Customer Service/Sales 888-844-4720 Rev D 07/09

INSTALLATION NOTE

1. DESCRIPTION

1.1 The TII SCT-A Active Sealing Current
Terminator is a microprocessor controlled
circuit that provides DC sealing current
terminations to non telephone service DSL
subscriber lines.

1.2 It maintains network connection integrity by
allowing current to flow through “DSL Only”
service.

2. WARRANTY

2.1 See TII Warranty. If this unit fails during the

warranty period, the factory should be
requested to authorize return. Return the unit
prepaid when authorization is received. Units
that fail due to abuse or normal wear should
be discarded.

Note: To be employed on the Equipment Side of a
Listed Primary Protector.

3. INSTALLATION

3.1 Identify the location where the existing DSL
Modem is installed.

3.2 Disconnect the existing telephone cable from
the wall jack to DSL modem (See Figure 1).

Wall Plate

Disconnect

Input

DSL

Modem

Output

Compute

Network Card

Input

Figure 1 Existing DSL Modem Connections

3.3 Insert the RJ-11 plug of the TII SCT-A (Line)
into the RJ-11 jack of the wall outlet (Figure

2).

3.4 Reconnect the telephone cable from the DSL
modem (Input) to the RJ-11 on the TII SCT-A
(Modem).

3.5 Perform necessary tests to confirm that the
computer communicates with the DSL
modem.

3.6 Use adhesive pad (supplied) to attach the TII
SCT-A to the wall.

Wall Plate

Reconnect

Compute

Network Card

Input

Input

DSL

Modem

Out

ut

TII SCT-A

Line

Modem

Figure 2 TII SCT-A Installation

TII P/N 92220701