Tiger Tiger3D Series, XL, HD, XHD Operator's Manual
Tiger3D Series
XL / HD / XHD
3DPrinter
Operators Manual
Version 1.0.1
3d
1
3d
Explore endless creativity with the Tiger 3D
Content
1. Product Information
1.1 Regulatory Statements .................................................................................................... #
1.2 Saftey Precautions .......................................................................................................... #
1.3 General Information ........................................................................................................ #
1.4 Package Contents .......................................................................................................... #
1.5 Product Overview ........................................................................................................... #
2. Setting up your 3D Printer - Hardware
2.1 Unpacking ...................................................................................................................... #
2.2 Connecting to the Power Adapter and Cable ................................................................. #
2.3 Power Button Control ..................................................................................................... #
2.4 Installing the Picker ........................................................................................................ #
2.5 Filling the Resin Tank ..................................................................................................... #
3. Operating your 3D Printer - Software
3.1 Installing Tiger3D Software ............................................................................................ #
3.2 TigerController ................................................................................................................ #
4. After Finished Printing
4.1 After Finished Printing .................................................................................................... #
4.2 Cleaning the Picker ........................................................................................................ #
4.3 Cleaning the Resin Tank ................................................................................................ #
4. Appendix
Appendix 1. Specications .................................................................................................. #
Appendix 2. Resin Curing Time ........................................................................................... #
Appendix 3. Printing Parameter .......................................................................................... #
2
3d
Explore endless creativity with the Tiger 3D
1. Product Information
1.1 Regulatory Statements
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class “A” digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at their expense.
COMPLIANCE
This equipment conforms with International Electric Committee (IEC) 60950-1 and meets the requirements of the
applicable EC directives.
3
3d
Explore endless creativity with the Tiger 3D
1.2 Safety Precautions
Please read through the following Safety Precautions before you start using your printer.
(1) Use only the power adapter and accessories provided by the manufacturer.
(2) Before plugging the power adapter into an electrical outlet, verify the local power rating conforms
with the specied voltage and frequency.
(3) This printer needs a grounded, 1-phase electrical power source.
(4) Make sure power and communication cables are well managed to prevent from tripping.
(5) Only use resins supplied by the Tiger3D manufacturer. Use of other unauthorized resins may
cause printing failure.
(6) Do not expose the resin tank to direct light source because the resin will solidify under UV light.
(7) Chemical substances like resin may cause skin irritation, please read the guidelines in Material
Safety Data Sheet (MSDS) of the resin supplied by manufacturer. It is recommended to wear gloves
when necessary.
(8) When moving the printer for a long distance, be sure to withdraw the remaining resin in reaction
tank and clean the tank in advance to prevent from resin overow.
(9) Keep doors closed during printing or curing to prevent UV leakage.
(10) UV light may cause injury of eyes, do not stare into the printer directly when it is in operation. It is
recommended to wear UV protective glasses during operating the printer.
(11) Place the device on a level surface and keep the printer in an upright position at all times.
(12) Do not store the printer in extreme hot and cold temperatures.
(13) Do not disassemble or repair the device yourself. Doing so may cause device malfunction or
danger.
4
3d
Explore endless creativity with the Tiger 3D
1.3 General Information
Product Name Tiger XL / HD / XHD
Model Number (XL)78-5000 (HD)78-5080 (XHD) 78-5050
Build Area (mm) (XL)125x70x120 (HD)80x45x120 (XHD)57x32x120
Resolution (XL)65mm (HD)41.5mm (XHD)30.mm
Layer Thickness 5 ~ 200mm
Wavelength 405nm
Printer Size 17 x 17 x 23 1/2” 83 - lbs
Printer Printer: 24V DC, 3.75A
File Input .SLC, .ZIP(PNG), .CWS, .WRK
File Input Limitation TigerController le input limitation from PC: 130
TigerController le input limitation from USB: 1GB
Interface Ethernet Connection, USB (Direct Printing)
Power Input With Adapter : 100~240V AC, 2A, 50/60Hz
Operating System Windows 7, Windows 8, Windows 10
Network Browser Google Chrome
Packaged Size and Weight 32 x 32 x 37 1/2” (including packing) 127.60 lbs
Operating Temperature 10°C to 30°C
Ideal Temperature 50 to 86°F (10°-28°C)
Humidity (RH) 40% to 60%
Our printer should keep in dry conditions
Store the materials at ambient temperature from 15°C to 28°C
Storage of Printing Material And do not exposure to the light, otherwise resin may solidied
● Liability: In case you do not follow the operating manual we cannot be held responsible for damages of the
machine or injuries on the operator.
● Repair can only be carried out by authorized manufacturer of the Tiger3D.
1.4 Package Contents
There is a printer and an accessory box inside the package. As soon as you receive our products, please verify
its content and check if there’s any exterior damage due to transportation.
5
1.5 Product Overview
3d
Explore endless creativity with the Tiger 3D
6
Inside
Resin Tank
Picker
Handle
Projector
Front View
Product Label
Fan
Storage Area
Front Panel
Network Port
Power Jack
USB Port
Printer Door
Power Button
Loading...