Tiger T6 User Manual

Page 1
1
Table of Contents
Safety Precaution
.......................................................................................2
1. Reference
1.1 General Features ...........................................................
........................3
2. Basic Function
2.1 Front Panel ................................................................................................5
2.2 Rear Panel .................................................................................................6
2.3 Remote Control Unit ...................................................................................7
3. Installation and Connection
3.1 Connecting to TV ......................................................................................9
3.2 Connecting to Dish LNB ...........................................................................10
4. Installation and Operation
4.1 Installation...................................................................................12
4.2 Channel Manager.........................................................................17
4.3 System Setting................................................................................18
4.4 Game.................................................................................................21
4.5 Other Useful Information................................................................22
5. Additional Information
5.1 Problem Solving..........................................................................28
5.2 Menu Screen Structure................................................................29
5.3 Glossary.......................................................................................30
Page 2
2
Safety Precaution
This STB has been designed and manufactured to satisfy the international safety standards. Please read the following safety precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put the receiver on soft furnishings or carpets.Do not expose the receiver to direct light or do not place it near a heater or in humid conditions. Do not stack other electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or mild solution of washing-up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect it from LNB. Failure would possibily cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock.Contact qualified and licensed service personnel to repair the receiver, or contact your dealer.
Page 3
3
1. Reference
1.1 General Features
MPEG-2 & Fully DVB Compliant USB 2.0 OTG supports PVR, Playing MP3, MPEG1/2 Movie, JPEG/BMP,Down-
loading Software, Uploading Database. PLL RF-Modulator UHF 21~69 with PAL B/G,I,D/K Multi LNB Control by DiSEqC 1.0,1.2,1.3(USALS) SCPC/MCPC Receivable from C / Ku-Band Satellites Digital Tuner with Loop-Through PAL/NTSC Conversion V ariable Aspect Ratio (4:3,16:9) for TV 4-digi 7-segment LED Display RS232 Port for Updating software and Additional Information User Friendly OSD Menu with Full Function Installation by Easy Setup Guide 256 Colors Graphic User Interface Easy Tuning and Network Search Multi Language Menu (English / Italian / French / Spanish / Germany / Turkish /
Arabic / Russian / Persian) 7-Days EPG (Electronic Program Guide) for On-Screen Channel Information PIG,Small Screen Picture on EPG PIP, Picture in Picture Super fast 800 pages OSD Teletext Supported and VBI Teletext Inserted 8 Favorite Group and Parent Lock Function 100 Satellites, 4000 Channels and 4000 transponders ZOOM and Multi Timer function Audio T one for Tuning signal 6 Kind of Sort function for Channels
Page 4
4
1.2 Accessories
Users manualRemote Control UnitA/V Cable
Batteries
Figure 1. Accessories
User Manual
User Manual
A/V Cable
Battery Remote control
Page 5
5
2. Basic Function
2.1 Front Panel
Figure 2. Front Panel
13264
5
1. Power Button
The POWER button is used to turn the power on or to make it on Standby Mode.
2. MENU Button
Activate the main menu in viewing mode, or exit all menu.
3. OK Button
Activate the highlighted sub menu in menu mode and activate the channel list in viewing mode.
4. S/T Button Change channel in viewing mode and move the cursor up/down in menu mode.
5. W/XButton Increase / decrease the volume in viewing mode and change settings in menu
mode
6. Display (4-digi 7-segment)
4-digi displays channel information. In Standby mode the 7-segment displays local time.
Page 6
6
LNB IN
2.2 Rear Panel
Figure 3. Rear Panel
2
13 10
6
574
1. LNB IN 13/18V 500mA Max
Connect the Satellite Dish LNB.
2. LOOP OUT
Output the Dish LNB IN signal.
3. AUDIO, VIDEO
Connect to Audio/Video of TV. Connect Yellow to Video port, connect Red and White to Audio Right and Audio Left.
4. 0/12V
Supply 12V DC to other apparatus.
5. TV SCART, VCR SCART
Connect to TV set or VCR player with Scart cables.
6. USB
One USB 2.0 Host support port.
7. RS232
Connect to serial port of PC for software upgrade.
8. ANT
Connect to TV Antenna
9.TV/VCR
Connect to TV set or VCR with Scart cables.
10. Power
AC Power Switch.
8
9
Page 7
7
2.3 Remote Control Unit(RCU)
Figure 4. Remote Control Unit
Y ou can control this receiver by this remote controller with full function.
1. POWER : Switch the receiver on or set it to standby mode.
2. MUTE : Turn the sound On/Off.
3. NUMERIC KEY (0~9):
Change program or input number.
4. TV/RADIO : Switch between TV and RADIO.
5. RECALL : Move to the previous viewed channel.
6. SAT : Show the scanned satellite list.
7. MENU : Activate main menu or exit to
live channel.
8. EPG (Electronic Program Guide): Show the TV/Radio program guide.
9. FAV : To get favorite channel list you set before.
10. EXIT : Exit current menu step by step.
10. /USB : Activate USB Menu / Stop
recording or playing.
11. Page S/T : Page up/down on menu.
12. CHS/T : Change channel.
13. VOLW/X : Change volume
14. OK : Confirm the highlighted menu item.
Open the channel list.
15. AUDIO : Select or change the Audio.
16. P AUSE : Freeze the picture.
17. ZOOM : Picture Zooming function.
18. INFO (i) : Show the information of the
current channel. Press EXIT button to exit this menu.
19. F1.SLEEP : No function.
20. F2.SUB : Showing Subtitle information if the channels contains.
Page 8
8
21. F3.PIP : Activate Multi picture menu and select picture
22. TTX : Show the teletext content if teletext is transmitted.
23. WW : Fast rewind
24. XX : Fast forward
25. X : Start playing / Release pause
26. WW : Play previous item.
27. XX : Play next item.
28. : Pause / Time-shift
29. : Start recording
Page 9
9
LNB IN
The following diagram shows you the connections among receiver, TV, LNB and other equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection.
3.1 Connecting to TV
3. Installation and Connection
Figure 5. Connecting to TV & VCR
AUDIO VIDEO TV SCART RF IN
RF IN VCR SCART RF OUT
TV
VCR
Page 10
10
3.2 Connecting to Dish LNB
You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dish LNB by DiSEqC Switch, you can also connect to HH mount dish LNB.
Figure 6. Connecting to Dish LNB
OR
COMPUTER
DISH
LNB
LNB
HH MOUNT DISH
LNB IN
Page 11
11
LNB IN
Figure 7. Connecting to Dish LNB
DiSEqC
LNB 1
LNB 2
LNB 3
LNB 4
Page 12
12
4. Installation and Operation
After connecting the receiver to other required equipment, turn on the
receiver, it will be main menu at the first startup, you need to follow the proce­dure to setup your receiver to search the channel.
--Menu Guide--
--Main Menu-- Press MENU button to activate main menu, main menu consists of Installation, Channel Manager,System Setting,Games.
4.1. Installation
4.1.1.Anttenna Setting
Select Installation, press OK , the Installation window will be displayed.
Press OK to Enter Antenna Setting, here you can make satellite search, multi satellites search, satellite edit, TP search, TP edit and other functions.This window shows the pre­stored satellite list,you can select satellite by S/T button,press OK to mark the satellite.
2).Use S/T button to select your subject and press OK to confirm your selection and enter that sub menu, press EXIT button you can return to the previous menu.
Page 13
13
C : Satellite Edit C-1 : Add satellite
Press Green button to add satellite,here you can input new positon and other details,OK to confirm the setting,and this new satellite will be added to the end of the satellite list.
C-2 : Delete satellite
Press Red button to delete satellite.You will get a warning message to ask you confirm the delete. After you confirm, all TP and channel in this satellite will be deleted.
C-3 : Rename satellite Press Yellow button to rename satellite.
A: Antenna setup
Press Right button on RCU and move to the antenna setting,here to setup the correct LNB frequency ,switch T ype(None, LNB 1...LNB 4,burst A,burstB,Auto).
B : LNB frequency and power
Here you need to check the LNB frequency according to your antenna,set the correct frequency or define yourself, and keep LNB power be 13V/18V.
Page 14
14
E: Transponder list
Here select transponder list by S/T button,press OK button.Here you can Add, Edit, Delete transponder under the satellite you selected.
E-1: Add TP
Press Green button you will get this window, and here you can input the frequency, polarization, symbol rate and FEC to add a new transponder, press OK to confirm the setting.
E-2: Delete TP Press Red key to delete the select TP with your confirm.
E-3: Search channel
After selecting transponders,you can press Blue button to start search channels.During searching the TV channel and Radio channel will be listed separately.
E-4: Edit PID
Press Yellow key to enter PID menu, here you can Add, Delete , sRename a channel.
E-4.1 Add PID Press Green button, you can add one channel by inputting the PID.
D :Multi Satellites Search
After selecting satellites,you can press Blue button to start search channels. During searching the TV channel and Radio channel will be listed separately.
Page 15
15
E-4.2: Rename
You can press Yellow button to rename the selected channel.
E-4.3: delete
Press the Red button to delete the selected channel .
F: Motorised System
If you connect receiver to DiSEqC1.2 or DiSEqC1.3 antenna,set Motorised system to DiSEqC1.2 or USALS, Here press OK button to enter motor system.
Satellite Select the correct satellite what you want to search.


Select the correct TP in this satellite to
detect the signal when motor is moving. Position Auto To Drive the dish until find the strong signal.


Continuously Move
Push
WW
WW
W /
XX
XX
X button, the dish will be
motorised to West / East to search the best signal, release the button will stop the moving.


Step Size
Set the moving step.


Move Steps
Move East or West step by step.


Limit Set
Disable or enable West limit or East limit by pressing OK.


Save Position
Press OK button to save the current position you searched.
Page 16
16


Command Type
Save Position: Save the current position. Go to Position: Press OK button to move the dish to the stored position.
Go to Reference: Press OK button to move the dish to reference 0 position. Go to X.X (9.9): If you use USALS and select the Motor Mode to USALS, here one more option you can move the dish to exact position of the
satellite. Note: Before you use USALS, you should go to Main Menu


System
Setting


USALS Setup to set you local position firstly.
4.1. 2 CA Menu
This message will appear after you insert the CA Card.
CA Menu
THis menu will display detail information about the CA Card.
Page 17
17
4.2. Channel Manager Press Channel Manager in the main menu, you will get this window, here you
can edit TV channels and Radio channels, sort channels and upgrade channels via SDX.
A: Edit Channels
Select Edit channel, you will go to the channel edit menu. Here you can Delete, Move, Rename or Lock the channels.
B: Edit Favorite
Enter Edit Favorites Menu, you can set 8 group favorites. You can scroll the favorites group by W / X key, and you can set the favorite by select the Red/Green/Yellow/
Blue key.
C: Parental Control
Here to setup your password easy to remember, if you forget this password, please contact with your dealer for assistance. Also you can select some menu entrance to be locked by password.
Page 18
18
D: Sort Channel
you can select <Satellite > to sort channels by satellite,select <Transponder>to sort channels by transponder ,select <Alphabet >to sort channels by alphabet ,and select <Original channel list> to sort channels back to original channel list.
E: Delete Satellite Channels
After select one satellite, if you press OK ,All channels of this satellite will be deleted.
F: Factory Default
You can choose reset type, <ALL, Channel list, only Radio list, only Scramble channel>. If you choose ALL, all the previous setting will be erased, such as parental code, favorite channel etc…
4.3. System Setting
Select System Setting, you can get this windows.
Page 19
19
C: Timer Adjust
Here you can set Timer, Event Timer and Sleep Timer.
A:System
Y ou can setup the menu language, audio language,RF, according to the standard of your country.
B: OSD
Here you can set some OSD options. Such as Menu Color, Transparency, Time out, and TV system, 4:3 and 16:9.
C-1. Timer Setup Here to set the timer mode, time zone and summer time if needed according to your region.
Page 20
20
C-3. Sleep Timer Here you can set Sleep timer to automatically switch off the receiver.
Timer Mode: <Auto> Auto detect timer from EPG time <Manual> Set the time by manual. Time zone: Select you the Time zone from the time difference. Summer Time: If you region need summer time to correct the current time, please make it ON.Source: <TV> Select channel from TV list <RADIO> Select channel from Radio list Channel: Select the channel from channel list Date: Start Date you want to active the timer Start/Stop: Set Start and Stop time Repeat: <1X> only one time <Day> Repeat every day. <1 Week> Repeat the channel 1 week. <1-5> Repeat the channel from Monday to Friday. <6-7> Repeat the channel from Saturday to Sunday.
C-2. Event Timer Here you can set your favorite channel to begin broadcasting at future time you set, including both TV and Radio, you can add, edit and delete the event you set. Note: You can add 8 groups event timer.
Page 21
21
D: Update Via SatcoDX
If you have subscription to TELE-Satellite, then you can use this function to upgrade the channel data by RS232 through the computer.
E: USALS Setup
If you use USALS, you have to setup your Local parameters.
F: About STB
Here is some information about this STB, including software version, hardware version Loader version, you need to submit these information to your dealer if you need service from them.
4.4. Games
Games are available in this S/W
Page 22
22
4.5. Other Useful Information
This will guide you on how to use general info while watching TV program or listening Radio program.
SA T
Press SA T button on the remote control, you will get this menu which contains the satel­lites you searched and stored, select one satellite and press OK, all channels will be listed under that satellite you selected.
TV/RADIO:
T o Switch between TV and Radio.
RECALL:
Press Recall button you will get the viewing history of last 16.
Page 23
23
Channel List-OK
In viewing mode press OK button and you will get this window. Press Red, Green, Yellow and Blue button to select different category.
EPG:
Press EPG button on remote control, you can get the electronic program guide of seven days if available.
FAV:
In viewing mode, you can get the favorite channel group by pressing FAV, press Red button to change category
AUDIO:
In viewing mode press AUDIO button and you will get a menu, you can set the Audio mode here and change the audio mode, Stereo, Left, Right.
Page 24
24
PAUSE:
If a USB disk is connected, it will initialize Time-shift, otherwise it will freeze the picture.
ZOOM:
Picture Zooming function.
i:
In the viewing mode when you press INFO button, the info bar will pop up, it contains satellite and channel information, detailed EPG info will display in the menu if press
INFO again.
F2:SUB
Showing Subtitle information if the channels contains.
Page 25
25
TTX:
Show the teletext content if teletextis transmitted.
F3:
In viewing mode ,press F3 you will get the multi picture selection ,select one and press ok ,multi picture will be displayed. Move S/
T
, W / X to select channel,press F3 again
to get that selected channelpop out and it is living ,press OK to display it in full screen or exit to select other channel.
/USB: Press “ /USB” key to enter USB menu. The current directory path display on the top part of the menu. The default file list is com­posed of all files and subfolders in the current path.
All supported files can be opened by pressing “OK” key, and these files such as *. mp3, *.jpg, *.bmp, *.dat, *.mpg, *.gts can also be opened by pressing “ X” key.
1) Press W / X key to switch to a specific file list of the current folder
2) Press OK / X key to play the selected file
Page 26
26
A : Play Stream
OK : View play list / Play the selected file in play listYELLOW_KEY : View play listX : Play the selected file in play list / Resume playing file
/USB : Stop playing file
WW : Play the previous item
XX
: Play the next item
/ PAUSE : Pause
AUDIO : Switch audio channelINFO : Display current file’s informationW / X : Adjust volumeEXIT : Exit play list menu / Exit playing state and return to file list menu.
B : View picture
OK : View play list / Play the selected file in play listYELLOW_KEY : View play listBLUE KEY : Switch on/off slide show,the interval of slide show is 5 seconds.X : Play the selected file in play list
/USB : Return to file list menu
WW : Play the previous item
XX : Play the next itemS/T: Play the previous/ next itemEXIT : Exit playing state and return to file list menu
C : Play Movie
OK : View play list / Play the selected file in play listYELLOW_KEY : View play listX : Play the selected file in play list
/USB : Stop playing file
WW : Play the previous item
XX
: Play the next item
AUDIO : Switch audio channelINFO : Display current file’s informationW / X : Adjust volumeEXIT : Exit play list menu / Exit playing state and return to file list menu
Page 27
27
D : Play MP3
OK : Play the selected file in play listX : Play the selected file in play list / Resume playing file
/USB : Stop playing file
WW : Play the previous item
XX
: Play the next item
/ PAUSE : Pause
W / X : Adjust volumeEXIT : Exit playing state and return to file list menu
E : Download Software/Database
1) Press W / X key to switch to “Software” file list of the current folder
2) Press OK key to open and download the selected file
F : Upload Database
In file list menu, press “FAV” key to start to upload database
G: Delete file
In file list menu, press “SA T” key can delete non-system file
: Press this key will stop display picture
for a moment and initialize record process. In recording mode, press INFO key to hide/ display the time-shift information, /USB or
EXIT key stop recording.
: If a USB disk is connected, press this
key will stop display picture and initialize time-shift. In time-shift mode, press INFO key to hide/display the time-shift information,
/USB or EXIT key stop time-shift.
Page 28
28
5. Additional Information
5.1 Problem Solving
You might meet abnormal working of this STB with various reasons, check the following which may help you.
Problem
LED on the front panel fail to light up/is not lit.
No picture or sound.
Bad picture/blocking error.
No startup menu on screen after turning on STB for the first time.
The remote control is not working.
You have forgotten your password.
Poor picture quality or Less channels in scanning.
Possible causes
Mains supply cable is not connected.
Satellite dish is not aiming to satellite accurately.
No signal or weak signal.
The LNB is faulty. The cable is faulty.
Satellite dish is not aiming to the satellite accurately Signal too strong. Satellite dish is too small. LNB noise factor too high. The LNB is faulty.
The system is connected by SCARTcables and the TV is not in AV/EXTmode.
Battery exhausted. Remote control is not aimed correctly
STB is in standby mode.
Low LNB power or signal loss in cable.
What to do
Check if the mains supply cable is plugged into the power socket.
Adjust the dish. Check the signal strength indicator in one of the channel search submenus. Check the cable connections,LNB and other equipment connected to LNB & receiver, or adjust dish. Replace the LNB. Replace the cable.
Adjust the dish. Connect a attenuator to LNB input.
Change to a larger dish. Change LNB with lower noise factor. Replace the LNB.
Switch the TV to the appropriate AV input.
Change the batteries (both). Aim the remote control at the STB. Check that nothing blocks the front panel. Check if LED indicator on the front panel is showing the time, press the power button to switch off standby mode.
Contact the dealer or Service Provider. They will help you set it up again.
Change the LNB power to 14V/19V in Antenna setup menu.
Page 29
29
Menu Navigator
searching
TV channels Radio channels
Antenna Setting
Transponder Motorised System ...
Edit Channels
Delete/Undelete Move Rename Lock/unlock
Installation
Antenna Setting CA Menu
System Setting
System OSD Timer Adjust Update via satcoDX USALS Setup About STB
Games
Hexa Mine
USALS Setup
Longitude Angle Longitude Direction Latitude Angle Latitude Direction Rotating speed
Upgrade via SatcoDX
Band Source Channel Type Only Transponder? Del Ecist Data?
About STB
Model ID H/W Ver S/W Ver Loader Ver
Edit Satellite
Add Delete Rename Move, Hide.
Edit Favorite
Movies Sports News Music ...
Parental control
Password lock Installation lock. System lock Change PIN
Timer Adjust
Timer Setup Even Timer Sleep Timer
Code
Code
5.2 Menu Screen Structure
Main Menu
Installation Channel Manager System Setting Games
Channel Manager
Edit Channel Edit Favorite Parental Control Sort Channels Del Satellite Channels Factory Default
System
Menu Language Audio 1 Audio 2 RF Channel RF System Change Channel Option
OSD
OSD Transponder TXT Transponder Need Help Time Out TV System TV Screen Format
Code
Ant posisitoner
Move Motor
Multisatellite set
Satellite Frequency
Factory Default
All Channel List Only Radio Channel Only Scramble Channel Only
Sort Channels
Satellite Transponder Alphabet Original Channel list
Del Satellite Channels
....
Page 30
30
5.3 Glossary
Antenna
A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna.
DiSEqC
DiSEqC(Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using only the existing coaxial cable.
DVB
The Digital Video Broadcast group was created to establish a technical framework for the introduction of digital video broadcasting systems.
LNB (low-noise block converter) or LNBF
An electronic unit mounted on the satellite dish. It receives the signals reflected by the dish and converts them to signals that can be used by the digital satellite receiver.
GHz
The prefix giga means milliard, and Hertz means cycles per second. Signals in the GHz range are often called microwaves.
MHz
The prefix mega means million, and Hertz means cycles per second.
MPEG
Moving Picture Experts Group. Established by the International Standards Organisation to provide the basis for a picture coding and compression system.
Forward Error Correction(FEC)
A system of error control for data transmission.
PID(Packet Identifier)
A set of numbers that idenitifies transport stream packets containing data from a single data stream.
Page 31
31
Polarisation
Polarisation allows several programmes to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarisation or circular (right or left) polarisation.
QPSK(Quaternary Phase Shift Keying)
Phase-shift keying in which four different phase angles are used.
Transponder
An automatic device that receives, amplifies and retransmits a signal on a different frequency.
Symbol rate
Speed of the digital transmission
RF
Radio frequency (known as HF in some countries).
RGB
Red, Green, Blue. Colour signals are routed in separatecables in order to provide a high quality TV picture.
Scrambled TV programme
Some TV programmes are transmitted in scrambled form.
SERIAL RS 232
A serial communication standard data port.
S/PDIF
Sony/Philips Digital Interface Format. Digital audio output.
RCA
Coaxial connector used to connect the receiver to an external amplifier.
Loading...